Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix typos in powernow-k8 printk's.
  [CPUFREQ] Restore previously used governor on a hot-replugged CPU
  [CPUFREQ] bugfix cpufreq in combination with performance governor
  [CPUFREQ] powernow-k8 compile fix.
  [CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI
  [CPUFREQ] Longhaul - Option to disable ACPI C3 support

Fixed up arch/i386/kernel/cpu/cpufreq/powernow-k8.c due to revert that
got fixed differently in the cpufreq branch.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/feature-removal-schedule.txt

@@ -196,28 +196,6 @@ Who:   Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:	ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
-When:	December 2006
-Why:	Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
-	functionally very much similar. They talk to ACPI in same way. Only
-	difference between them is the way they do frequency transitions.
-	One uses MSRs and the other one uses IO ports. Functionaliy of
-	speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
-	That means one common driver will support all Intel Enhanced Speedstep
-	capable CPUs. That means less confusion over name of
-	speedstep-centrino driver (with that driver supposed to be used on
-	non-centrino platforms). That means less duplication of code and
-	less maintenance effort and no possibility of these two drivers
-	going out of sync.
-	Current users of speedstep_centrino with ACPI hooks are requested to
-	switch over to acpi-cpufreq driver. speedstep-centrino will continue
-	to work using older non-ACPI static table based scheme even after this
-	date.
-
-Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
----------------------------
-
 What:	/sys/firmware/acpi/namespace
 When:	2.6.21
 Why:	The ACPI namespace is effectively the symbol list for

arch/i386/kernel/cpu/cpufreq/Kconfig

@@ -116,7 +116,7 @@ config X86_GX_SUSPMOD
 config X86_SPEEDSTEP_CENTRINO
 	tristate "Intel Enhanced SpeedStep"
 	select CPU_FREQ_TABLE
-	select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+	select X86_SPEEDSTEP_CENTRINO_TABLE
 	help
 	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
 	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
@@ -128,20 +128,6 @@ config X86_SPEEDSTEP_CENTRINO
 
 	  If in doubt, say N.
 
-config X86_SPEEDSTEP_CENTRINO_ACPI
-	bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
-	depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
-	depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
-	help
-	  This is deprecated and this functionality is now merged into
-	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-	  speedstep_centrino.
-	  Use primarily the information provided in the BIOS ACPI tables
-	  to determine valid CPU frequency and voltage pairings. It is
-	  required for the driver to work on non-Banias CPUs.
-
-	  If in doubt, say Y.
-
 config X86_SPEEDSTEP_CENTRINO_TABLE
 	bool "Built-in tables for Banias CPUs"
 	depends on X86_SPEEDSTEP_CENTRINO
@@ -237,7 +223,7 @@ comment "shared options"
 config X86_ACPI_CPUFREQ_PROC_INTF
 	bool "/proc/acpi/processor/../performance interface (deprecated)"
 	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
 	help
 	  This enables the deprecated /proc/acpi/processor/../performance
 	  interface. While it is helpful for debugging, the generic,

arch/i386/kernel/cpu/cpufreq/longhaul.c

@@ -75,6 +75,7 @@ static unsigned int longhaul_index;
 
 /* Module parameters */
 static int scale_voltage;
+static int disable_acpi_c3;
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
 
@@ -844,6 +845,9 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		if (cx->address > 0 && cx->latency <= 1000)
 			longhaul_flags |= USE_ACPI_C3;
 	}
+	/* Disable if it isn't working */
+	if (disable_acpi_c3)
+		longhaul_flags &= ~USE_ACPI_C3;
 	/* Check if northbridge is friendly */
 	if (enable_arbiter_disable())
 		longhaul_flags |= USE_NORTHBRIDGE;
@@ -952,6 +956,9 @@ static void __exit longhaul_exit(void)
 	kfree(longhaul_table);
 }
 
+module_param (disable_acpi_c3, int, 0644);
+MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
+
 module_param (scale_voltage, int, 0644);
 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 

arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -599,14 +599,17 @@ static void print_basics(struct powernow_k8_data *data)
 	for (j = 0; j < data->numps; j++) {
 		if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
 			if (cpu_family == CPU_HW_PSTATE) {
-			printk(KERN_INFO PFX "   %d : fid 0x%x gid 0x%x (%d MHz)\n", j, (data->powernow_table[j].index & 0xff00) >> 8,
-				(data->powernow_table[j].index & 0xff0000) >> 16,
-				data->powernow_table[j].frequency/1000);
+				printk(KERN_INFO PFX "   %d : fid 0x%x did 0x%x (%d MHz)\n",
+					j,
+					(data->powernow_table[j].index & 0xff00) >> 8,
+					(data->powernow_table[j].index & 0xff0000) >> 16,
+					data->powernow_table[j].frequency/1000);
 			} else {
-			printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x\n", j,
-				data->powernow_table[j].index & 0xff,
-				data->powernow_table[j].frequency/1000,
-				data->powernow_table[j].index >> 8);
+				printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x\n",
+					j,
+					data->powernow_table[j].index & 0xff,
+					data->powernow_table[j].frequency/1000,
+					data->powernow_table[j].index >> 8);
 			}
 		}
 	}
@@ -1086,7 +1089,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	if (cpu_family == CPU_HW_PSTATE)
 		dprintk("targ: curr fid 0x%x, did 0x%x\n",
-			data->currfid, data->currvid);
+			data->currfid, data->currdid);
 	else {
 		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
@@ -1322,16 +1325,22 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
 static int __cpuinit powernowk8_init(void)
 {
 	unsigned int i, supported_cpus = 0;
+	unsigned int booted_cores = 1;
 
 	for_each_online_cpu(i) {
 		if (check_supported_cpu(i))
 			supported_cpus++;
 	}
 
+#ifdef CONFIG_SMP
+	booted_cores = cpu_data[0].booted_cores;
+#endif
+
 	if (supported_cpus == num_online_cpus()) {
 		printk(KERN_INFO PFX "Found %d %s "
-			"processors (" VERSION ")\n", supported_cpus,
-			boot_cpu_data.x86_model_id);
+			"processors (%d cpu cores) (" VERSION ")\n",
+			supported_cpus/booted_cores,
+			boot_cpu_data.x86_model_id, supported_cpus);
 		return cpufreq_register_driver(&cpufreq_amd64_driver);
 	}