Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
	include/linux/inetdevice.h

The inetdevice.h conflict involves moving the IPV4_DEVCONF values
into a UAPI header, overlapping additions of some new entries.

The iwlwifi conflict is a context overlap.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/kernel-parameters.txt

@@ -2953,7 +2953,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
-	swapaccount[=0|1]
+	swapaccount=[0|1]
 			[KNL] Enable accounting of swap in memory resource
 			controller if no parameter or 1 is given or disable
 			it if 0 is given (See Documentation/cgroups/memory.txt)

MAINTAINERS

@@ -5884,7 +5884,7 @@ F:	drivers/i2c/busses/i2c-omap.c
 F:	include/linux/i2c-omap.h
 
 OMAP DEVICE TREE SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 L:	devicetree@vger.kernel.org
@@ -5964,14 +5964,14 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP HWMOD SUPPORT
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M:	Benoît Cousson <b-cousson@ti.com>
+M:	Benoît Cousson <bcousson@baylibre.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -7367,7 +7367,6 @@ F:	drivers/net/ethernet/sfc/
 
 SGI GRU DRIVER
 M:	Dimitri Sivanich <sivanich@sgi.com>
-M:	Robin Holt <holt@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-gru/
 
@@ -7387,7 +7386,8 @@ S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-M:	Robin Holt <holt@sgi.com>
+M:	Cliff Whickman <cpw@sgi.com>
+M:	Robin Holt <robinmholt@gmail.com>
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -14,11 +14,11 @@
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -94,8 +94,9 @@
 
 		usb0: ohci@00600000 {
 			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+					   &pioD 19 GPIO_ACTIVE_LOW
 					   &pioD 20 GPIO_ACTIVE_LOW
 					  >;
 		};

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -830,6 +830,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 24 0>; /* PD0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -412,6 +412,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&gpio 170 0>; /* PV2 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/boot/dts/tegra20-whistler.dts

@@ -588,6 +588,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vbus3_reg: regulator@3 {
@@ -598,6 +600,8 @@
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
 			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 

arch/arm/include/asm/smp_plat.h

@@ -88,4 +88,7 @@ static inline u32 mpidr_hash_size(void)
 {
 	return 1 << mpidr_hash.bits;
 }
+
+extern int platform_can_cpu_hotplug(void);
+
 #endif

arch/arm/include/asm/spinlock.h

@@ -107,7 +107,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 		"	subs	%1, %0, %0, ror #16\n"
 		"	addeq	%0, %0, %4\n"
 		"	strexeq	%2, %0, [%3]"
-		: "=&r" (slock), "=&r" (contended), "=r" (res)
+		: "=&r" (slock), "=&r" (contended), "=&r" (res)
 		: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
 		: "cc");
 	} while (res);
@@ -168,17 +168,20 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 
 static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
-"	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
+	do {
+		__asm__ __volatile__(
+		"	ldrex	%0, [%2]\n"
+		"	mov	%1, #0\n"
+		"	teq	%0, #0\n"
+		"	strexeq	%1, %3, [%2]"
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock), "r" (0x80000000)
+		: "cc");
+	} while (res);
 
-	if (tmp == 0) {
+	if (!contended) {
 		smp_mb();
 		return 1;
 	} else {
@@ -254,18 +257,26 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp, tmp2 = 1;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
-"	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-	: "=&r" (tmp), "+r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
+	do {
+		__asm__ __volatile__(
+		"	ldrex	%0, [%2]\n"
+		"	mov	%1, #0\n"
+		"	adds	%0, %0, #1\n"
+		"	strexpl	%1, %0, [%2]"
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock)
+		: "cc");
+	} while (res);
 
-	smp_mb();
-	return tmp2 == 0;
+	/* If the lock is negative, then it is already held for write. */
+	if (contended < 0x80000000) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
 }
 
 /* read_can_lock - would read_trylock() succeed? */

arch/arm/kernel/entry-armv.S

@@ -357,7 +357,8 @@ ENDPROC(__pabt_svc)
 	.endm
 
 	.macro	kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
+    !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 #ifndef CONFIG_MMU
 #warning "NPTL on non MMU needs fixing"
 #else

arch/arm/kernel/fiq.c

@@ -84,17 +84,13 @@ int show_fiq_list(struct seq_file *p, int prec)
 
 void set_fiq_handler(void *start, unsigned int length)
 {
-#if defined(CONFIG_CPU_USE_DOMAINS)
-	void *base = (void *)0xffff0000;
-#else
 	void *base = vectors_page;
-#endif
 	unsigned offset = FIQ_OFFSET;
 
 	memcpy(base + offset, start, length);
+	if (!cache_is_vipt_nonaliasing())
+		flush_icache_range(base + offset, offset + length);
 	flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
-	if (!vectors_high())
-		flush_icache_range(offset, offset + length);
 }
 
 int claim_fiq(struct fiq_handler *f)

arch/arm/kernel/machine_kexec.c

@@ -15,6 +15,7 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
+#include <asm/smp_plat.h>
 #include <asm/system_misc.h>
 
 extern const unsigned char relocate_new_kernel[];
@@ -38,6 +39,14 @@ int machine_kexec_prepare(struct kimage *image)
 	__be32 header;
 	int i, err;
 
+	/*
+	 * Validate that if the current HW supports SMP, then the SW supports
+	 * and implements CPU hotplug for the current HW. If not, we won't be
+	 * able to kexec reliably, so fail the prepare operation.
+	 */
+	if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug())
+		return -EINVAL;
+
 	/*
 	 * No segment at default ATAGs address. try to locate
 	 * a dtb using magic.
@@ -134,10 +143,13 @@ void machine_kexec(struct kimage *image)
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
-	if (num_online_cpus() > 1) {
-		pr_err("kexec: error: multiple CPUs still online\n");
-		return;
-	}
+	/*
+	 * This can only happen if machine_shutdown() failed to disable some
+	 * CPU, and that can only happen if the checks in
+	 * machine_kexec_prepare() were not correct. If this fails, we can't
+	 * reliably kexec anyway, so BUG_ON is appropriate.
+	 */
+	BUG_ON(num_online_cpus() > 1);
 
 	page_list = image->head & PAGE_MASK;
 

arch/arm/kernel/perf_event.c

@@ -56,7 +56,7 @@ armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 	int mapping;
 
 	if (config >= PERF_COUNT_HW_MAX)
-		return -ENOENT;
+		return -EINVAL;
 
 	mapping = (*event_map)[config];
 	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
@@ -258,6 +258,9 @@ validate_event(struct pmu_hw_events *hw_events,
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	struct pmu *leader_pmu = event->group_leader->pmu;
 
+	if (is_software_event(event))
+		return 1;
+
 	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
 		return 1;
 

arch/arm/kernel/process.c

@@ -462,7 +462,7 @@ int in_gate_area_no_mm(unsigned long addr)
 {
 	return in_gate_area(NULL, addr);
 }
-#define is_gate_vma(vma)	((vma) = &gate_vma)
+#define is_gate_vma(vma)	((vma) == &gate_vma)
 #else
 #define is_gate_vma(vma)	0
 #endif

arch/arm/kernel/smp.c

@@ -145,6 +145,16 @@ int boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return -ENOSYS;
 }
 
+int platform_can_cpu_hotplug(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	if (smp_ops.cpu_kill)
+		return 1;
+#endif
+
+	return 0;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static void percpu_timer_stop(void);
 

arch/arm/kvm/coproc.c

@@ -146,16 +146,20 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
 #define access_pmintenclr pm_fake
 
 /* Architected CP15 registers.
- * Important: Must be sorted ascending by CRn, CRM, Op1, Op2
+ * CRn denotes the primary register number, but is copied to the CRm in the
+ * user space API for 64-bit register access in line with the terminology used
+ * in the ARM ARM.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit
+ *            registers preceding 32-bit ones.
  */
 static const struct coproc_reg cp15_regs[] = {
 	/* CSSELR: swapped by interrupt.S. */
 	{ CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
 			NULL, reset_unknown, c0_CSSELR },
 
 	/* TTBR0/TTBR1: swapped by interrupt.S. */
-	{ CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
-	{ CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
+	{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
+	{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
 
 	/* TTBCR: swapped by interrupt.S. */
 	{ CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32,
@@ -182,7 +186,7 @@ static const struct coproc_reg cp15_regs[] = {
 			NULL, reset_unknown, c6_IFAR },
 
 	/* PAR swapped by interrupt.S */
-	{ CRn( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR },
+	{ CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR },
 
 	/*
 	 * DC{C,I,CI}SW operations:
@@ -399,12 +403,13 @@ static bool index_to_params(u64 id, struct coproc_params *params)
 			      | KVM_REG_ARM_OPC1_MASK))
 			return false;
 		params->is_64bit = true;
-		params->CRm = ((id & KVM_REG_ARM_CRM_MASK)
+		/* CRm to CRn: see cp15_to_index for details */
+		params->CRn = ((id & KVM_REG_ARM_CRM_MASK)
 			       >> KVM_REG_ARM_CRM_SHIFT);
 		params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK)
 			       >> KVM_REG_ARM_OPC1_SHIFT);
 		params->Op2 = 0;
-		params->CRn = 0;
+		params->CRm = 0;
 		return true;
 	default:
 		return false;
@@ -898,7 +903,14 @@ static u64 cp15_to_index(const struct coproc_reg *reg)
 	if (reg->is_64) {
 		val |= KVM_REG_SIZE_U64;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
-		val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT);
+		/*
+		 * CRn always denotes the primary coproc. reg. nr. for the
+		 * in-kernel representation, but the user space API uses the
+		 * CRm for the encoding, because it is modelled after the
+		 * MRRC/MCRR instructions: see the ARM ARM rev. c page
+		 * B3-1445
+		 */
+		val |= (reg->CRn << KVM_REG_ARM_CRM_SHIFT);
 	} else {
 		val |= KVM_REG_SIZE_U32;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);