Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: ftdi_sio: Added custom PIDs for ChamSys products
  USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors.
  USB: cdc-acm: Add pseudo modem without AT command capabilities
  USB: cxacru: Use a bulk/int URB to access the command endpoint
  usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters.
  USB: cdc-acm: Adding second ACM channel support for various Nokia and one Samsung phones
  usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P.
  USB: ssu100: turn off debug flag
  usb: allow drivers to use allocated bandwidth until unbound
  USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile.
  USB: cp210x: Add B&G H3000 link cable ID
  USB: CP210x Add new device ID
  USB: option: fix incorrect novatel entries
  USB: Fix kernel oops with g_ether and Windows
  USB: rndis: section mismatch fix
  USB: ehci-ppc-of: problems in unwind
  USB: s3c-hsotg: Remove DEBUG define

drivers/usb/atm/cxacru.c

@@ -1127,6 +1127,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 {
 	struct cxacru_data *instance;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
 	int ret;
 
 	/* instance init */
@@ -1171,15 +1172,34 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 		goto fail;
 	}
 
-	usb_fill_int_urb(instance->rcv_urb,
+	if (!cmd_ep) {
+		dbg("cxacru_bind: no command endpoint");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			== USB_ENDPOINT_XFER_INT) {
+		usb_fill_int_urb(instance->rcv_urb,
 			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->rcv_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->rcv_done, 1);
 
-	usb_fill_int_urb(instance->snd_urb,
+		usb_fill_int_urb(instance->snd_urb,
 			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->snd_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->snd_done, 4);
+	} else {
+		usb_fill_bulk_urb(instance->rcv_urb,
+			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->rcv_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->rcv_done);
+
+		usb_fill_bulk_urb(instance->snd_urb,
+			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->snd_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->snd_done);
+	}
 
 	mutex_init(&instance->cm_serialize);
 

drivers/usb/class/cdc-acm.c

@@ -965,7 +965,8 @@ static int acm_probe(struct usb_interface *intf,
 	}
 
 	if (!buflen) {
-		if (intf->cur_altsetting->endpoint->extralen &&
+		if (intf->cur_altsetting->endpoint &&
+				intf->cur_altsetting->endpoint->extralen &&
 				intf->cur_altsetting->endpoint->extra) {
 			dev_dbg(&intf->dev,
 				"Seeking extra descriptors on endpoint\n");
@@ -1481,6 +1482,11 @@ static int acm_reset_resume(struct usb_interface *intf)
 		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
 		USB_CDC_ACM_PROTO_VENDOR)
 
+#define SAMSUNG_PCSUITE_ACM_INFO(x) \
+		USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
+		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+		USB_CDC_ACM_PROTO_VENDOR)
+
 /*
  * USB driver structure.
  */
@@ -1591,6 +1597,17 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
@@ -1599,6 +1616,10 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = NOT_A_MODEM,
        	},
 
+	/* control interfaces without any protocol set */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_PROTO_NONE) },
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },

drivers/usb/core/message.c

@@ -1724,6 +1724,15 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	if (ret)
 		goto free_interfaces;
 
+	/* if it's already configured, clear out old state first.
+	 * getting rid of old interfaces means unbinding their drivers.
+	 */
+	if (dev->state != USB_STATE_ADDRESS)
+		usb_disable_device(dev, 1);	/* Skip ep0 */
+
+	/* Get rid of pending async Set-Config requests for this device */
+	cancel_async_set_config(dev);
+
 	/* Make sure we have bandwidth (and available HCD resources) for this
 	 * configuration.  Remove endpoints from the schedule if we're dropping
 	 * this configuration to set configuration 0.  After this point, the
@@ -1733,20 +1742,11 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	mutex_lock(&hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
-		usb_autosuspend_device(dev);
 		mutex_unlock(&hcd->bandwidth_mutex);
+		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
 
-	/* if it's already configured, clear out old state first.
-	 * getting rid of old interfaces means unbinding their drivers.
-	 */
-	if (dev->state != USB_STATE_ADDRESS)
-		usb_disable_device(dev, 1);	/* Skip ep0 */
-
-	/* Get rid of pending async Set-Config requests for this device */
-	cancel_async_set_config(dev);
-
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
 			      NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -1761,8 +1761,8 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		usb_autosuspend_device(dev);
 		mutex_unlock(&hcd->bandwidth_mutex);
+		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
 	mutex_unlock(&hcd->bandwidth_mutex);

drivers/usb/gadget/rndis.c

@@ -293,9 +293,13 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 	/* mandatory */
 	case OID_GEN_VENDOR_DESCRIPTION:
 		pr_debug("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__);
-		length = strlen (rndis_per_dev_params [configNr].vendorDescr);
-		memcpy (outbuf,
-			rndis_per_dev_params [configNr].vendorDescr, length);
+		if ( rndis_per_dev_params [configNr].vendorDescr ) {
+			length = strlen (rndis_per_dev_params [configNr].vendorDescr);
+			memcpy (outbuf,
+				rndis_per_dev_params [configNr].vendorDescr, length);
+		} else {
+			outbuf[0] = 0;
+		}
 		retval = 0;
 		break;
 
@@ -1148,7 +1152,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
 #endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
 
 
-int __init rndis_init (void)
+int rndis_init(void)
 {
 	u8 i;
 

drivers/usb/gadget/rndis.h

@@ -262,7 +262,7 @@ int  rndis_signal_disconnect (int configNr);
 int  rndis_state (int configNr);
 extern void rndis_set_host_mac (int configNr, const u8 *addr);
 
-int __devinit rndis_init (void);
+int rndis_init(void);
 void rndis_exit (void);
 
 #endif  /* _LINUX_RNDIS_H */

drivers/usb/gadget/s3c-hsotg.c

@@ -12,8 +12,6 @@
  * published by the Free Software Foundation.
 */
 
-#define DEBUG
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>

drivers/usb/host/ehci-ppc-of.c

@@ -192,17 +192,19 @@ ehci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *mat
 	}
 
 	rv = usb_add_hcd(hcd, irq, 0);
-	if (rv == 0)
-		return 0;
+	if (rv)
+		goto err_ehci;
+
+	return 0;
 
+err_ehci:
+	if (ehci->has_amcc_usb23)
+		iounmap(ehci->ohci_hcctrl_reg);
 	iounmap(hcd->regs);
 err_ioremap:
 	irq_dispose_mapping(irq);
 err_irq:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
-	if (ehci->has_amcc_usb23)
-		iounmap(ehci->ohci_hcctrl_reg);
 err_rmr:
 	usb_put_hcd(hcd);
 

drivers/usb/serial/cp210x.c

@@ -56,6 +56,7 @@ static int debug;
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
@@ -88,6 +89,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
@@ -109,6 +111,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
@@ -122,14 +125,14 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
-	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
-	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
-	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
-	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
 

drivers/usb/serial/ftdi_sio.c

@@ -753,6 +753,14 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio_ids.h

@@ -134,6 +134,18 @@
 #define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
 #define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
 
+/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID        0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID       0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID       0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID     0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID     0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID    0xDAFE
+#define FTDI_CHAMSYS_WING_PID  0xDAFF
+
 /*
  * Westrex International devices submitted by Cory Lee
  */

drivers/usb/serial/mos7840.c

@@ -119,16 +119,20 @@
  * by making a change here, in moschip_port_id_table, and in
  * moschip_id_table_combined
  */
-#define USB_VENDOR_ID_BANDB             0x0856
-#define BANDB_DEVICE_ID_USO9ML2_2	0xAC22
-#define BANDB_DEVICE_ID_USO9ML2_4	0xAC24
-#define BANDB_DEVICE_ID_US9ML2_2	0xAC29
-#define BANDB_DEVICE_ID_US9ML2_4	0xAC30
-#define BANDB_DEVICE_ID_USPTL4_2	0xAC31
-#define BANDB_DEVICE_ID_USPTL4_4	0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2	0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4	0xAC44
-#define BANDB_DEVICE_ID_USOPTL2_4	0xAC24
+#define USB_VENDOR_ID_BANDB              0x0856
+#define BANDB_DEVICE_ID_USO9ML2_2        0xAC22
+#define BANDB_DEVICE_ID_USO9ML2_2P       0xBC00
+#define BANDB_DEVICE_ID_USO9ML2_4        0xAC24
+#define BANDB_DEVICE_ID_USO9ML2_4P       0xBC01
+#define BANDB_DEVICE_ID_US9ML2_2         0xAC29
+#define BANDB_DEVICE_ID_US9ML2_4         0xAC30
+#define BANDB_DEVICE_ID_USPTL4_2         0xAC31
+#define BANDB_DEVICE_ID_USPTL4_4         0xAC32
+#define BANDB_DEVICE_ID_USOPTL4_2        0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
+#define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
+#define BANDB_DEVICE_ID_USOPTL2_4        0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
@@ -184,13 +188,17 @@ static const struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
@@ -201,13 +209,17 @@ static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},