---

yaml
---
r: 232495
b: refs/heads/master
c: 2e5aa68
h: refs/heads/master
i:
  232493: 5ee560f
  232491: 67fe37f
  232487: 063c9d8
  232479: a263fa2
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 95f9354b4cd23902e0556348325366378cb5e621
+refs/heads/master: 2e5aa6824d9e0248d734573dad8858a2cc279cfe

trunk/.mailmap

@@ -23,7 +23,6 @@ Andy Adamson <andros@citi.umich.edu>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
 Axel Dyks <xl@xlsigned.net>
-Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>

trunk/Documentation/kernel-parameters.txt

@@ -43,11 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
-	DRM	Direct Rendering Management support is enabled.
-	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.

trunk/Documentation/networking/bonding.txt

@@ -49,8 +49,7 @@ Table of Contents
 3.3	Configuring Bonding Manually with Ifenslave
 3.3.1		Configuring Multiple Bonds Manually
 3.4	Configuring Bonding Manually via Sysfs
-3.5	Configuration with Interfaces Support
-3.6	Overriding Configuration for Special Cases
+3.5	Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -162,8 +161,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
 default kernel source include directory.
 
 SECOND IMPORTANT NOTE:
-	If you plan to configure bonding using sysfs or using the
-/etc/network/interfaces file, you do not need to use ifenslave.
+	If you plan to configure bonding using sysfs, you do not need
+to use ifenslave.
 
 2. Bonding Driver Options
 =========================
@@ -780,26 +779,22 @@ resend_igmp
 
 	You can configure bonding using either your distro's network
 initialization scripts, or manually using either ifenslave or the
-sysfs interface.  Distros generally use one of three packages for the
-network initialization scripts: initscripts, sysconfig or interfaces.
-Recent versions of these packages have support for bonding, while older
+sysfs interface.  Distros generally use one of two packages for the
+network initialization scripts: initscripts or sysconfig.  Recent
+versions of these packages have support for bonding, while older
 versions do not.
 
 	We will first describe the options for configuring bonding for
-distros using versions of initscripts, sysconfig and interfaces with full
-or partial support for bonding, then provide information on enabling
+distros using versions of initscripts and sysconfig with full or
+partial support for bonding, then provide information on enabling
 bonding without support from the network initialization scripts (i.e.,
 older versions of initscripts or sysconfig).
 
-	If you're unsure whether your distro uses sysconfig,
-initscripts or interfaces, or don't know if it's new enough, have no fear.
+	If you're unsure whether your distro uses sysconfig or
+initscripts, or don't know if it's new enough, have no fear.
 Determining this is fairly straightforward.
 
-	First, look for a file called interfaces in /etc/network directory.
-If this file is present in your system, then your system use interfaces. See
-Configuration with Interfaces Support.
-
-	Else, issue the command:
+	First, issue the command:
 
 $ rpm -qf /sbin/ifup
 
@@ -1332,62 +1327,8 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-3.5 Configuration with Interfaces Support
------------------------------------------
-
-        This section applies to distros which use /etc/network/interfaces file
-to describe network interface configuration, most notably Debian and it's
-derivatives.
-
-	The ifup and ifdown commands on Debian don't support bonding out of
-the box. The ifenslave-2.6 package should be installed to provide bonding
-support.  Once installed, this package will provide bond-* options to be used
-into /etc/network/interfaces.
-
-	Note that ifenslave-2.6 package will load the bonding module and use
-the ifenslave command when appropriate.
-
-Example Configurations
-----------------------
-
-In /etc/network/interfaces, the following stanza will configure bond0, in
-active-backup mode, with eth0 and eth1 as slaves.
-
-auto bond0
-iface bond0 inet dhcp
-	bond-slaves eth0 eth1
-	bond-mode active-backup
-	bond-miimon 100
-	bond-primary eth0 eth1
-
-If the above configuration doesn't work, you might have a system using
-upstart for system startup. This is most notably true for recent
-Ubuntu versions. The following stanza in /etc/network/interfaces will
-produce the same result on those systems.
-
-auto bond0
-iface bond0 inet dhcp
-	bond-slaves none
-	bond-mode active-backup
-	bond-miimon 100
-
-auto eth0
-iface eth0 inet manual
-	bond-master bond0
-	bond-primary eth0 eth1
-
-auto eth1
-iface eth1 inet manual
-	bond-master bond0
-	bond-primary eth0 eth1
-
-For a full list of bond-* supported options in /etc/network/interfaces and some
-more advanced examples tailored to you particular distros, see the files in
-/usr/share/doc/ifenslave-2.6.
-
-3.6 Overriding Configuration for Special Cases
+3.5 Overriding Configuration for Special Cases
 ----------------------------------------------
-
 When using the bonding driver, the physical port which transmits a frame is
 typically selected by the bonding driver, and is not relevant to the user or
 system administrator.  The output port is simply selected using the policies of

trunk/MAINTAINERS

@@ -3327,6 +3327,7 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Reinette Chatre <reinette.chatre@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org

trunk/arch/arm/include/asm/hardware/sp810.h

@@ -50,12 +50,6 @@
 #define SCPCELLID2		0xFF8
 #define SCPCELLID3		0xFFC
 
-#define SCCTRL_TIMEREN0SEL_REFCLK	(0 << 15)
-#define SCCTRL_TIMEREN0SEL_TIMCLK	(1 << 15)
-
-#define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
-#define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
-
 static inline void sysctl_soft_reset(void __iomem *base)
 {
 	/* writing any value to SCSYSSTAT reg will reset system */

trunk/arch/arm/include/asm/memory.h

@@ -188,7 +188,7 @@
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
-static inline unsigned long virt_to_phys(const volatile void *x)
+static inline unsigned long virt_to_phys(void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }

trunk/arch/arm/kernel/smp_twd.c

@@ -36,7 +36,6 @@ static void twd_set_mode(enum clock_event_mode mode,
 		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
@@ -82,7 +81,7 @@ int twd_timer_ack(void)
 
 static void __cpuinit twd_calibrate_rate(void)
 {
-	unsigned long count;
+	unsigned long load, count;
 	u64 waitjiffies;
 
 	/*
@@ -117,6 +116,10 @@ static void __cpuinit twd_calibrate_rate(void)
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
 			(twd_timer_rate / 1000000) % 100);
 	}
+
+	load = twd_timer_rate / HZ;
+
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
 }
 
 /*

trunk/arch/arm/mach-ep93xx/gpio.c

@@ -427,13 +427,6 @@ void __init ep93xx_gpio_init(void)
 {
 	int i;
 
-	/* Set Ports C, D, E, G, and H for GPIO use */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK |
-				 EP93XX_SYSCON_DEVCFG_EONIDE |
-				 EP93XX_SYSCON_DEVCFG_GONIDE |
-				 EP93XX_SYSCON_DEVCFG_HONIDE);
-
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
 		gpiochip_add(&ep93xx_gpio_banks[i].chip);
 }

trunk/arch/arm/mach-omap2/pm24xx.c

@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
 
 	/* Block console output in case it is on one of the OMAP UARTs */
 	if (!is_suspending())
-		if (!console_trylock())
+		if (try_acquire_console_sem())
 			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(0);
 
 	if (!is_suspending())
-		console_unlock();
+		release_console_sem();
 
 no_sleep:
 	if (omap2_pm_debug) {

trunk/arch/arm/mach-omap2/pm34xx.c

@@ -398,7 +398,7 @@ void omap_sram_idle(void)
 	if (!is_suspending())
 		if (per_next_state < PWRDM_POWER_ON ||
 		    core_next_state < PWRDM_POWER_ON)
-			if (!console_trylock())
+			if (try_acquire_console_sem())
 				goto console_still_active;
 
 	/* PER */
@@ -481,7 +481,7 @@ void omap_sram_idle(void)
 	}
 
 	if (!is_suspending())
-		console_unlock();
+		release_console_sem();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */

trunk/arch/arm/mach-omap2/serial.c

@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 
 	oh->dev_attr = uart;
 
-	console_lock(); /* in case the earlycon is on the UART */
+	acquire_console_sem(); /* in case the earlycon is on the UART */
 
 	/*
 	 * Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
-	console_unlock();
+	release_console_sem();
 
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {