---

yaml
---
r: 120985
b: refs/heads/master
c: fa623d1
h: refs/heads/master
i:
  120983: cfc4be0
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ecbf29cdb3990c83d90d0c4187c89fb2ce423367
+refs/heads/master: fa623d1b0222adbe8f822e53c08003b9679a410c

trunk/Documentation/feature-removal-schedule.txt

@@ -244,18 +244,6 @@ Who:	Michael Buesch <mb@bu3sch.de>
 
 ---------------------------
 
-What:	init_mm export
-When:	2.6.26
-Why:	Not used in-tree. The current out-of-tree users used it to
-	work around problems in the CPA code which should be resolved
-	by now. One usecase was described to provide verification code
-	of the CPA operation. That's a good idea in general, but such
-	code / infrastructure should be in the kernel and not in some
-	out-of-tree driver.
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
-----------------------------
-
 What:	usedac i386 kernel parameter
 When:	2.6.27
 Why:	replaced by allowdac and no dac combination

trunk/Documentation/filesystems/proc.txt

@@ -1339,10 +1339,13 @@ nmi_watchdog
 
 Enables/Disables the NMI watchdog on x86 systems.  When the value is non-zero
 the NMI watchdog is enabled and will continuously test all online cpus to
-determine whether or not they are still functioning properly.
+determine whether or not they are still functioning properly. Currently,
+passing "nmi_watchdog=" parameter at boot time is required for this function
+to work.
 
-Because the NMI watchdog shares registers with oprofile, by disabling the NMI
-watchdog, oprofile may have more registers to utilize.
+If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
+NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
+oprofile may have more registers to utilize.
 
 msgmni
 ------

trunk/Documentation/kernel-parameters.txt

@@ -1393,7 +1393,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+			Format: [panic,][num]
+			Valid num: 0,1,2
+			0 - turn nmi_watchdog off
+			1 - use the IO-APIC timer for the NMI watchdog
+			2 - use the local APIC for the NMI watchdog using
+			a performance counter. Note: This will use one performance
+			counter and the local APIC's performance vector.
+			When panic is specified panic when an NMI watchdog timeout occurs.
+			This is useful when you use a panic=... timeout and need the box
+			quickly up again.
+			Instead of 1 and 2 it is possible to use the following
+			symbolic names: lapic and ioapic
+			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
 
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 			emulation library even if a 387 maths coprocessor
@@ -1626,6 +1639,17 @@ and is between 256 and 4096 characters. It is defined in the file
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
+		noioapicquirk	[APIC] Disable all boot interrupt quirks.
+				Safety option to keep boot IRQs enabled. This
+				should never be necessary.
+		ioapicreroute	[APIC] Enable rerouting of boot IRQs to the
+				primary IO-APIC for bridges that cannot disable
+				boot IRQs. This fixes a source of spurious IRQs
+				when the system masks IRQs.
+		noioapicreroute	[APIC] Disable workaround that uses the
+				boot IRQ equivalent of an IRQ that connects to
+				a chipset where boot IRQs cannot be disabled.
+				The opposite of ioapicreroute.
 		biosirq		[X86-32] Use PCI BIOS calls to get the interrupt
 				routing table. These calls are known to be buggy
 				on several machines and they hang the machine
@@ -2255,6 +2279,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
+	tsc=		Disable clocksource-must-verify flag for TSC.
+			Format: <string>
+			[x86] reliable: mark tsc clocksource as reliable, this
+			disables clocksource verification at runtime.
+			Used to enable high-resolution timer mode on older
+			hardware, and in virtualized environment.
+
 	turbografx.map[2|3]=	[HW,JOY]
 			TurboGraFX parallel port interface
 			Format:

trunk/Documentation/nmi_watchdog.txt

@@ -69,6 +69,11 @@ to the overall system performance.
 On x86 nmi_watchdog is disabled by default so you have to enable it with
 a boot time parameter.
 
+It's possible to disable the NMI watchdog in run-time by writing "0" to
+/proc/sys/kernel/nmi_watchdog. Writing "1" to the same file will re-enable
+the NMI watchdog. Notice that you still need to use "nmi_watchdog=" parameter
+at boot time.
+
 NOTE: In kernels prior to 2.4.2-ac18 the NMI-oopser is enabled unconditionally
 on x86 SMP boxes.
 

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC9227/9228/9229/927x
 	  ref		Reference board
+	  ref-no-jd	Reference board without HP/Mic jack detection
 	  3stack	D965 3stack
 	  5stack	D965 5stack + SPDIF
 	  dell-3stack	Dell Dimension E520
@@ -1076,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC92HD73*
 	  ref		Reference board
+	  no-jd		BIOS setup but without jack-detection
 	  dell-m6-amic	Dell desktops/laptops with analog mics
 	  dell-m6-dmic	Dell desktops/laptops with digital mics
 	  dell-m6	Dell desktops/laptops with both type of mics

trunk/Documentation/usb/gadget_serial.txt

@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget

trunk/Documentation/usb/proc_usb_info.txt

@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,

trunk/Documentation/usb/usbmon.txt

@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond

trunk/Documentation/x86/boot.txt

@@ -349,7 +349,7 @@ Protocol:	2.00+
 	3  SYSLINUX
 	4  EtherBoot
 	5  ELILO
-	7  GRuB
+	7  GRUB
 	8  U-BOOT
 	9  Xen
 	A  Gujin
@@ -537,8 +537,8 @@ Type:		read
 Offset/size:	0x248/4
 Protocol:	2.08+
 
-  If non-zero then this field contains the offset from the end of the
-  real-mode code to the payload.
+  If non-zero then this field contains the offset from the beginning
+  of the protected-mode code to the payload.
 
   The payload may be compressed. The format of both the compressed and
   uncompressed data should be determined using the standard magic

trunk/Documentation/x86/pat.txt

@@ -80,6 +80,30 @@ pci proc               |    --    |    --      |       WC         |
                        |          |            |                  |
 -------------------------------------------------------------------
 
+Advanced APIs for drivers
+-------------------------
+A. Exporting pages to users with remap_pfn_range, io_remap_pfn_range,
+vm_insert_pfn
+
+Drivers wanting to export some pages to userspace do it by using mmap
+interface and a combination of
+1) pgprot_noncached()
+2) io_remap_pfn_range() or remap_pfn_range() or vm_insert_pfn()
+
+With PAT support, a new API pgprot_writecombine is being added. So, drivers can
+continue to use the above sequence, with either pgprot_noncached() or
+pgprot_writecombine() in step 1, followed by step 2.
+
+In addition, step 2 internally tracks the region as UC or WC in memtype
+list in order to ensure no conflicting mapping.
+
+Note that this set of APIs only works with IO (non RAM) regions. If driver
+wants to export a RAM region, it has to do set_memory_uc() or set_memory_wc()
+as step 0 above and also track the usage of those pages and use set_memory_wb()
+before the page is freed to free pool.
+
+
+
 Notes:
 
 -- in the above table mean "Not suggested usage for the API". Some of the --'s

trunk/Documentation/x86/x86_64/boot-options.txt

@@ -79,17 +79,6 @@ Timing
   Report when timer interrupts are lost because some code turned off
   interrupts for too long.
 
-  nmi_watchdog=NUMBER[,panic]
-  NUMBER can be:
-  0 don't use an NMI watchdog
-  1 use the IO-APIC timer for the NMI watchdog
-  2 use the local APIC for the NMI watchdog using a performance counter. Note
-  This will use one performance counter and the local APIC's performance
-  vector.
-  When panic is specified panic when an NMI watchdog timeout occurs.
-  This is useful when you use a panic=... timeout and need the box
-  quickly up again.
-
   nohpet
   Don't use the HPET timer.
 

trunk/Documentation/x86/x86_64/mm.txt

@@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory
+ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
 ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
 ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)

trunk/MAINTAINERS

@@ -2191,9 +2191,9 @@ S:	Supported
 
 INOTIFY
 P:	John McCutchan
-M:	ttb@tentacle.dhs.org
+M:	john@johnmccutchan.com
 P:	Robert Love
-M:	rml@novell.com
+M:	rlove@rlove.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc9
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

trunk/arch/avr32/boards/favr-32/flash.c

@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,

trunk/arch/avr32/boards/favr-32/setup.c

@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {

trunk/arch/avr32/boot/images/Makefile

@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)