Merge branch 'ep93xx' into devel

arch/arm/mach-ep93xx/Kconfig

@@ -9,87 +9,135 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+choice
+	prompt "EP93xx first SDRAM bank selection"
+	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "0x00000000 - SDCE3/SyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+	bool "0xc0000000 - SDCEO"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xc0000000
+
+endchoice
+
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB93XX
+	bool
+
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307A Evaluation Board.
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9312 Evaluation Board.
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
 config MACH_MICRO9
-        bool
-        default n
+	bool
 
 config MACH_MICRO9H
-       bool "Support Contec Hypercontrol Micro9-H"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-H board.
+	bool "Support Contec Hypercontrol Micro9-H"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-H board.
 
 config MACH_MICRO9M
-       bool "Support Contec Hypercontrol Micro9-M"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-M board.
+	bool "Support Contec Hypercontrol Micro9-M"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-M board.
 
 config MACH_MICRO9L
-       bool "Support Contec Hypercontrol Micro9-L"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-L board.
+	bool "Support Contec Hypercontrol Micro9-L"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-L board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.

arch/arm/mach-ep93xx/Makefile

@@ -7,13 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
-obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
-obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
-obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
-obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
-obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
-obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o

arch/arm/mach-ep93xx/Makefile.boot

@@ -1,2 +1,5 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100

arch/arm/mach-ep93xx/clock.c

@@ -72,58 +72,58 @@ static struct clk clk_h;
 static struct clk clk_p;
 static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00020000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00010000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00080000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00040000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00200000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00100000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00800000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00400000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x02000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x01000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x04000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x08000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
 
 #define INIT_CK(dev,con,ck)					\
@@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "hclk", &clk_h),
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
 	INIT_CK(NULL, "m2p0", &clk_m2p0),
 	INIT_CK(NULL, "m2p1", &clk_m2p1),
 	INIT_CK(NULL, "m2p2", &clk_m2p2),

arch/arm/mach-ep93xx/core.c

@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	int port_mask = 1 << (line & 7);
 
 	if (enable)
-		gpio_int_debouce[port] |= port_mask;
+		gpio_int_debounce[port] |= port_mask;
 	else
-		gpio_int_debouce[port] &= ~port_mask;
+		gpio_int_debounce[port] &= ~port_mask;
 
-	__raw_writeb(gpio_int_debouce[port],
+	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);