---

yaml
---
r: 6135
b: refs/heads/master
c: 975f957
h: refs/heads/master
i:
  6133: 275d640
  6131: be79ce1
  6127: f6e2c56
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 661299d9d0437a0ff72240f3d60016ac3a361a6e
+refs/heads/master: 975f957dc408925805dd8f5aa4217b7eeea2d005

trunk/CREDITS

@@ -2380,8 +2380,8 @@ E: tmolina@cablespeed.com
 D: bug fixes, documentation, minor hackery
 
 N: James Morris
-E: jmorris@redhat.com
-W: http://www.intercode.com.au/jmorris/
+E: jmorris@namei.org
+W: http://namei.org/
 D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec,
 D: Crypto API, general networking, miscellaneous.
 S: PO Box 707
@@ -2423,8 +2423,7 @@ S: Toronto, Ontario
 S: Canada
 
 N: Zwane Mwaikambo
-E: zwane@linuxpower.ca
-W: http://function.linuxpower.ca
+E: zwane@arm.linux.org.uk
 D: Various driver hacking
 D: Lowlevel x86 kernel hacking
 D: General debugging

trunk/Documentation/SubmittingPatches

@@ -149,6 +149,11 @@ USB, framebuffer devices, the VFS, the SCSI subsystem, etc.  See the
 MAINTAINERS file for a mailing list that relates specifically to
 your change.
 
+If changes affect userland-kernel interfaces, please send
+the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
+a man-pages patch, or at least a notification of the change,
+so that some information makes its way into the manual pages.
+
 Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 

trunk/Documentation/acpi-hotkey.txt

@@ -33,3 +33,6 @@ The result of the execution of this aml method is
 attached to /proc/acpi/hotkey/poll_method, which is dnyamically
 created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
 to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.

trunk/Documentation/arm/Samsung-S3C24XX/USB-Host.txt

@@ -0,0 +1,93 @@
+			S3C24XX USB Host support
+			========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig:
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+    CONFIG_USB
+    CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in linux/arch/arm/mach-s3c2410,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  descriptions of the platform device data. An implementation
+  can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics

trunk/Documentation/dontdiff

@@ -104,6 +104,7 @@ logo_*.c
 logo_*_clut224.c
 logo_*_mono.c
 lxdialog
+mach-types
 mach-types.h
 make_times_h
 map

trunk/Documentation/fb/vesafb.txt

@@ -144,7 +144,21 @@ vgapal	Use the standard vga registers for palette changes.
 	This is the default.
 pmipal	Use the protected mode interface for palette changes.
 
-mtrr	setup memory type range registers for the vesafb framebuffer.
+mtrr:n	setup memory type range registers for the vesafb framebuffer
+	where n:
+	      0 - disabled (equivalent to nomtrr)
+	      1 - uncachable
+	      2 - write-back
+	      3 - write-combining (default)
+	      4 - write-through
+
+	If you see the following in dmesg, choose the type that matches the
+	old one. In this example, use "mtrr:2".
+...
+mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
+...
+
+nomtrr  disable mtrr
 
 vremap:n
         remap 'n' MiB of video RAM. If 0 or not specified, remap memory

trunk/Documentation/kernel-parameters.txt

@@ -159,6 +159,11 @@ running once the system is up.
 
 	acpi_fake_ecdt	[HW,ACPI] Workaround failure due to BIOS lacking ECDT
 
+	acpi_generic_hotkey [HW,ACPI]
+			Allow consolidated generic hotkey driver to
+			over-ride platform specific driver.
+			See also Documentation/acpi-hotkey.txt.
+
 	ad1816=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 			See also Documentation/sound/oss/AD1816.