---

yaml
---
r: 167064
b: refs/heads/master
c: 15870f0
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6f775ba0154cdf10108071acc71f26c4efdb8d57
+refs/heads/master: 15870f05e90a365f8022da416e713be0c5024e2f

trunk/.gitignore

@@ -27,7 +27,6 @@
 *.gz
 *.lzma
 *.patch
-*.gcno
 
 #
 # Top-level generic files

trunk/CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@comnets.uni-bremen.de
+E: ajk@iehk.rwth-aachen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,9 +2006,6 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
-N: Jonathan Layes
-D: ARPD support
-
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -2800,7 +2797,7 @@ D: Starter of Linux1394 effort
 S: ask per mail for current address
 
 N: Nicolas Pitre
-E: nico@fluxnic.net
+E: nico@cam.org
 D: StrongARM SA1100 support integrator & hacker
 D: Xscale PXA architecture
 D: unified SMC 91C9x/91C11x ethernet driver (smc91x)
@@ -3805,9 +3802,6 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
-N: Thomas Woller
-D: CS461x Cirrus Logic sound driver
-
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

trunk/Documentation/00-INDEX

@@ -82,8 +82,6 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
-btmrvl.txt
-	- info on Marvell Bluetooth driver usage.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/

trunk/Documentation/ABI/testing/sysfs-block

@@ -94,37 +94,28 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit a physical storage device can
-		write atomically.  It is usually the same as the logical
-		block size but may be bigger.  One example is SATA
-		drives with 4KB sectors that expose a 512-byte logical
-		block size to the operating system.  For stacked block
-		devices the physical_block_size variable contains the
-		maximum physical_block_size of the component devices.
+		This is the smallest unit the storage device can write
+		without resorting to read-modify-write operation.  It is
+		usually the same as the logical block size but may be
+		bigger.  One example is SATA drives with 4KB sectors
+		that expose a 512-byte logical block size to the
+		operating system.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a granularity or preferred
-		minimum I/O size which is the smallest request the
-		device can perform without incurring a performance
-		penalty.  For disk drives this is often the physical
-		block size.  For RAID arrays it is often the stripe
-		chunk size.  A properly aligned multiple of
-		minimum_io_size is the preferred request size for
-		workloads where a high number of I/O operations is
-		desired.
+		Storage devices may report a preferred minimum I/O size,
+		which is the smallest request the device can perform
+		without incurring a read-modify-write penalty.  For disk
+		drives this is often the physical block size.  For RAID
+		arrays it is often the stripe chunk size.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit for sustained I/O.  This is
-		rarely reported for disk drives.  For RAID arrays it is
-		usually the stripe width or the internal track size.  A
-		properly aligned multiple of optimal_io_size is the
-		preferred request size for workloads where sustained
-		throughput is desired.  If no optimal I/O size is
-		reported this file contains 0.
+		the device's preferred unit of receiving I/O.  This is
+		rarely reported for disk drives.  For RAID devices it is
+		usually the stripe width or the internal block size.

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -84,16 +84,6 @@ Description:
 		from this part of the device tree.
 		Depends on CONFIG_HOTPLUG.
 
-What:		/sys/bus/pci/devices/.../reset
-Date:		July 2009
-Contact:	Michael S. Tsirkin <mst@redhat.com>
-Description:
-		Some devices allow an individual function to be reset
-		without affecting other functions in the same device.
-		For devices that have this support, a file named reset
-		will be present in sysfs.  Writing 1 to this file
-		will perform reset.
-
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -31,31 +31,3 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
-Date:		August 2009
-Kernel Version:	2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Kicks of a rescan of the controller to discover logical
-		drive topology changes.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the 8-byte LUN ID used to address logical
-		drive Y of controller X.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the RAID level of logical drive Y of
-		controller X.
-
-Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
-Date:		August 2009
-Kernel Version: 2.6.31
-Contact:	iss_storagedev@hp.com
-Description:	Displays the usage count (number of opens) of logical drive Y
-		of controller X.

trunk/Documentation/ABI/testing/sysfs-gpio

@@ -19,7 +19,6 @@ Description:
 	/gpioN ... for each exported GPIO #N
 	    /value ... always readable, writes fail for input GPIOs
 	    /direction ... r/w as: in, out (default low); write: high, low
-	    /edge ... r/w as: none, falling, rising, both
 	/gpiochipN ... for each gpiochip; #N is its first GPIO
 	    /base ... (r/o) same as N
 	    /label ... (r/o) descriptive, not necessarily unique

trunk/Documentation/DocBook/Makefile

@@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
-	    tracepoint.xml media.xml
+	    tracepoint.xml
 
 ###
 # The build process is as follows (targets):
@@ -32,7 +32,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -45,16 +45,12 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: media $(HTML)
+htmldocs: $(HTML)
 	$(call build_main_index)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
-media:
-	mkdir -p $(srctree)/Documentation/DocBook/media/
-	cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/
-
 installmandocs: mandocs
 	mkdir -p /usr/local/man/man9/
 	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/