Merge tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/s…

…cm/linux/kernel/git/tmlind/linux-omap into next/boards

From Tony Lindgren:

Minor board changes for v3.11 merge window. These are
tapering down finally as we're getting closer to making
omap2+ DT only.

* tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/bcache.txt

@@ -319,7 +319,10 @@ cache<0..n>
   Symlink to each of the cache devices comprising this cache set. 
 
 cache_available_percent
-  Percentage of cache device free.
+  Percentage of cache device which doesn't contain dirty data, and could
+  potentially be used for writeback.  This doesn't mean this space isn't used
+  for clean cached data; the unused statistic (in priority_stats) is typically
+  much lower.
 
 clear_stats
   Clears the statistics associated with this cache
@@ -423,8 +426,11 @@ nbuckets
   Total buckets in this cache
 
 priority_stats
-  Statistics about how recently data in the cache has been accessed.  This can
-  reveal your working set size.
+  Statistics about how recently data in the cache has been accessed.
+  This can reveal your working set size.  Unused is the percentage of
+  the cache that doesn't contain any data.  Metadata is bcache's
+  metadata overhead.  Average is the average priority of cache buckets.
+  Next is a list of quantiles with the priority threshold of each.
 
 written
   Sum of all data that has been written to the cache; comparison with

Documentation/devices.txt

@@ -498,12 +498,8 @@ Your cooperation is appreciated.
 
 		Each device type has 5 bits (32 minors).
 
- 13 block	8-bit MFM/RLL/IDE controller
-		  0 = /dev/xda		First XT disk whole disk
-		 64 = /dev/xdb		Second XT disk whole disk
-
-		Partitions are handled in the same way as IDE disks
-		(see major number 3).
+ 13 block	Previously used for the XT disk (/dev/xdN)
+		Deleted in kernel v3.9.
 
  14 char	Open Sound System (OSS)
 		  0 = /dev/mixer	Mixer control

Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt

@@ -1,7 +1,7 @@
 Atmel AT91RM9200 Real Time Clock
 
 Required properties:
-- compatible: should be: "atmel,at91rm9200-rtc"
+- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: rtc alarm/event interrupt

Documentation/dmatest.txt

@@ -34,7 +34,7 @@ command:
 After a while you will start to get messages about current status or error like
 in the original code.
 
-Note that running a new test will stop any in progress test.
+Note that running a new test will not stop any in progress test.
 
 The following command should return actual state of the test.
 	% cat /sys/kernel/debug/dmatest/run
@@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state.
 
 The module parameters that is supplied to the kernel command line will be used
 for the first performed test. After user gets a control, the test could be
-interrupted or re-run with same or different parameters. For the details see
-the above section "Part 2 - When dmatest is built as a module..."
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
 
 In both cases the module parameters are used as initial values for the test case.
 You always could check them at run-time by running

Documentation/filesystems/xfs.txt

@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
 	removing extended attributes) the on-disk superblock feature
 	bit field will be updated to reflect this format being in use.
 
+	CRC enabled filesystems always use the attr2 format, and so
+	will reject the noattr2 mount option if it is set.
+
   barrier
 	Enables the use of block layer write barriers for writes into
 	the journal and unwritten extent conversion.  This allows for

Documentation/kernel-parameters.txt

@@ -3351,9 +3351,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			plus one apbt timer for broadcast timer.
 			x86_mrst_timer=apbt_only | lapic_and_apbt
 
-	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
-	xd_geo=		See header of drivers/block/xd.c.
-
 	xen_emul_unplug=		[HW,X86,XEN]
 			Unplug Xen emulated devices
 			Format: [unplug0,][unplug1]

Documentation/m68k/kernel-options.txt

@@ -80,8 +80,6 @@ Valid names are:
   /dev/sdd: -> 0x0830 (forth SCSI disk)
   /dev/sde: -> 0x0840 (fifth SCSI disk)
   /dev/fd : -> 0x0200 (floppy disk)
-  /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
-  /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
 
   The name must be followed by a decimal number, that stands for the
 partition number. Internally, the value of the number is just

Documentation/powerpc/transactional_memory.txt

@@ -147,6 +147,25 @@ Example signal handler:
       fix_the_problem(ucp->dar);
     }
 
+When in an active transaction that takes a signal, we need to be careful with
+the stack.  It's possible that the stack has moved back up after the tbegin.
+The obvious case here is when the tbegin is called inside a function that
+returns before a tend.  In this case, the stack is part of the checkpointed
+transactional memory state.  If we write over this non transactionally or in
+suspend, we are in trouble because if we get a tm abort, the program counter and
+stack pointer will be back at the tbegin but our in memory stack won't be valid
+anymore.
+
+To avoid this, when taking a signal in an active transaction, we need to use
+the stack pointer from the checkpointed state, rather than the speculated
+state.  This ensures that the signal context (written tm suspended) will be
+written below the stack required for the rollback.  The transaction is aborted
+becuase of the treclaim, so any memory written between the tbegin and the
+signal will be rolled back anyway.
+
+For signals taken in non-TM or suspended mode, we use the
+normal/non-checkpointed stack pointer.
+
 
 Failure cause codes used by kernel
 ==================================
@@ -155,14 +174,18 @@ These are defined in <asm/reg.h>, and distinguish different reasons why the
 kernel aborted a transaction:
 
  TM_CAUSE_RESCHED       Thread was rescheduled.
+ TM_CAUSE_TLBI          Software TLB invalide.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
  TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
                         transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
+ TM_CAUSE_ALIGNMENT     Alignment fault.
+ TM_CAUSE_EMULATE       Emulation that touched memory.
 
-These can be checked by the user program's abort handler as TEXASR[0:7].
-
+These can be checked by the user program's abort handler as TEXASR[0:7].  If
+bit 7 is set, it indicates that the error is consider persistent.  For example
+a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q
 
 GDB
 ===

MAINTAINERS

@@ -2890,8 +2890,8 @@ F:	drivers/media/dvb-frontends/ec100*
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
+W:	http://ecryptfs.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
 F:	Documentation/filesystems/ecryptfs.txt
@@ -3322,11 +3322,12 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
+M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-T:	git git://github.com/schandinat/linux-2.6.git fbdev-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git
 S:	Maintained
 F:	Documentation/fb/
 F:	Documentation/devicetree/bindings/fb/
@@ -4447,6 +4448,16 @@ S:	Maintained
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
+ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
+M:	Or Gerlitz <ogerlitz@mellanox.com>
+M:	Roi Dayan <roid@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+S:	Supported
+W:	http://www.openfabrics.org
+W:	www.open-iscsi.org
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+F:	drivers/infiniband/ulp/iser
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
@@ -5755,7 +5766,7 @@ M:	Matthew Wilcox <willy@linux.intel.com>
 L:	linux-nvme@lists.infradead.org
 T:	git git://git.infradead.org/users/willy/linux-nvme.git
 S:	Supported
-F:	drivers/block/nvme.c
+F:	drivers/block/nvme*
 F:	include/linux/nvme.h
 
 OMAP SUPPORT
@@ -6087,7 +6098,15 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
 S:	Maintained
 F:	arch/parisc/
+F:	Documentation/parisc/
 F:	drivers/parisc/
+F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/serio/gscps2.c
+F:	drivers/parport/parport_gsc.*
+F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/video/sti*
+F:	drivers/video/console/sti*
+F:	drivers/video/logo/logo_parisc*
 
 PC87360 HARDWARE MONITORING DRIVER
 M:	Jim Cromie <jim.cromie@gmail.com>
@@ -7605,7 +7624,7 @@ F:	drivers/clk/spear/
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
 M:	Grant Likely <grant.likely@linaro.org>
-L:	spi-devel-general@lists.sourceforge.net
+L:	linux-spi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 S:	Maintained
@@ -8985,7 +9004,7 @@ S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 L:	linux-input@vger.kernel.org
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
@@ -8995,7 +9014,6 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS DRIVERS
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 L:	patches@opensource.wolfsonmicro.com
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/Makefile

@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \

arch/arm/boot/compressed/debug.S

@@ -1,6 +1,8 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
 #include CONFIG_DEBUG_LL_INCLUDE
 
 ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
 	busyuart r3, r1
 	mov	 pc, lr
 ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+	adr	r1, 1f
+	ldmia	r1, {r2, r3}
+	add	r2, r2, r1
+	ldr	r1, [r2, r3]
+	strb	r0, [r1]
+	mov	r0, #0x03		@ SYS_WRITEC
+   ARM(	svc	#0x123456	)
+ THUMB(	svc	#0xab		)
+	mov	pc, lr
+	.align	2
+1:	.word	_GLOBAL_OFFSET_TABLE_ - .
+	.word	semi_writec_buf(GOT)
+ENDPROC(putc)
+
+	.bss
+	.global	semi_writec_buf
+	.type   semi_writec_buf, %object
+semi_writec_buf:
+	.space	4
+	.size	semi_writec_buf, 4
+
+#endif

arch/arm/boot/compressed/head-sa1100.S

@@ -11,6 +11,7 @@
 #include <asm/mach-types.h>
 
 		.section        ".start", "ax"
+		.arch	armv4
 
 __SA1100_start:
 

arch/arm/boot/compressed/head-shark.S

@@ -18,6 +18,7 @@
 	
 		.section	".start", "ax"
 
+		.arch armv4
 		b	__beginning
 	
 __ofw_data:	.long	0				@ the number of memory blocks

arch/arm/boot/compressed/head.S

@@ -11,6 +11,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+	.arch	armv7-a
 /*
  * Debugging stuff
  *
@@ -805,8 +806,8 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x00000000		@ old ARM ID
-		.word	0x0000f000
+		.word	0x41000000		@ old ARM ID
+		.word	0xff00f000
 		mov	pc, lr
  THUMB(		nop				)
 		mov	pc, lr

arch/arm/boot/dts/am33xx.dtsi

@@ -409,8 +409,8 @@
 			ti,hwmods = "gpmc";
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			num-cs = <7>;
-			num-waitpins = <2>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			status = "disabled";

arch/arm/boot/dts/armada-xp-gp.dts

@@ -39,8 +39,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x1000000>;
+		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -27,8 +27,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x8000000>;
+		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
+			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/bcm2835.dtsi

@@ -44,6 +44,7 @@
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
 			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
 		};
 
 		gpio: gpio {

arch/arm/boot/dts/exynos5250.dtsi

@@ -497,6 +497,21 @@
 		clock-names = "usbhost";
 	};
 
+	usbphy@12130000 {
+		compatible = "samsung,exynos5250-usb2phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock 1>, <&clock 285>;
+		clock-names = "ext_xtal", "usbhost";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			reg = <0x10040704 0x8>,
+			      <0x10050230 0x4>;
+		};
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;