Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/…

…git/galak/powerpc into for-2.6.25

arch/powerpc/boot/dts/adder875-redboot.dts

@@ -151,6 +151,7 @@
 				compatible = "fsl,mpc875-brg",
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
 				reg = <0x9f0 0x10>;
 			};
 

arch/powerpc/boot/dts/adder875-uboot.dts

@@ -150,6 +150,7 @@
 				compatible = "fsl,mpc875-brg",
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
 				reg = <0x9f0 0x10>;
 			};
 

arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -118,6 +118,10 @@
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@3100 {

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -96,7 +96,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		compatible = "simple-bus";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
 		ranges = <0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;

arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -332,7 +332,7 @@
 				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
 				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
 		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
+		interrupts = <67 0x8>;
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
 			  0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -42,6 +42,18 @@
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
 	};
 
 	memory {

arch/powerpc/boot/dts/mpc885ads.dts

@@ -166,6 +166,7 @@
 				compatible = "fsl,mpc885-brg",
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
+				clock-frequency = <0>;
 				reg = <9f0 10>;
 			};
 

arch/powerpc/boot/dts/storcenter.dts

@@ -15,7 +15,7 @@
 
 / {
 	model = "StorCenter";
-	compatible = "storcenter";
+	compatible = "iomega,storcenter";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -62,12 +62,12 @@
 			#size-cells = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
-			interrupts = <5 2>;
+			interrupts = <17 2>;
 			interrupt-parent = <&mpic>;
 
 			rtc@68 {
 				compatible = "dallas,ds1337";
-				reg = <68>;
+				reg = <0x68>;
 			};
 		};
 
@@ -78,7 +78,7 @@
 			reg = <0x4500 0x20>;
 			clock-frequency = <97553800>; /* Hz */
 			current-speed = <115200>;
-			interrupts = <9 2>;
+			interrupts = <25 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -89,7 +89,7 @@
 			reg = <0x4600 0x20>;
 			clock-frequency = <97553800>; /* Hz */
 			current-speed = <9600>;
-			interrupts = <10 2>;
+			interrupts = <26 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -136,6 +136,6 @@
 	};
 
 	chosen {
-		linux,stdout-path = "/soc/serial@4500";
+		linux,stdout-path = &serial0;
 	};
 };

arch/powerpc/configs/mpc83xx_defconfig

@@ -186,7 +186,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
+CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -416,14 +416,14 @@ CONFIG_PHYLIB=y
 # MII PHY device drivers
 #
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_DAVICOM_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
+CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
+CONFIG_ICPLUS_PHY=y
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -436,7 +436,7 @@ CONFIG_MII=y
 CONFIG_NETDEV_1000=y
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
 CONFIG_NETDEV_10000=y
 
 #

arch/powerpc/kernel/cputable.c

@@ -959,6 +959,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e300",
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 	{	/* e300c4 (e300c1, plus one IU) */
@@ -971,6 +974,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
 		.machine_check		= machine_check_generic,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e300",
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 	{	/* default match, we assume split I/D cache & TB (non-601)... */
@@ -1435,7 +1441,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_BOOKE,
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8540",
 	},
@@ -1453,7 +1459,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_BOOKE,
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
 	},

arch/powerpc/kernel/pmc.c

@@ -26,7 +26,7 @@
 
 static void dummy_perf(struct pt_regs *regs)
 {
-#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
+#if defined(CONFIG_FSL_EMB_PERFMON)
 	mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE);
 #elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	if (cur_cpu_spec->pmc_type == PPC_PMC_IBM)

arch/powerpc/oprofile/Makefile

@@ -15,5 +15,5 @@ oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
 		cell/spu_profiler.o cell/vma_map.o \
 		cell/spu_task_sync.o
 oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
-oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
+oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
 oprofile-$(CONFIG_6xx) += op_model_7450.o

arch/powerpc/oprofile/common.c

@@ -202,9 +202,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 			model = &op_model_7450;
 			break;
 #endif
-#ifdef CONFIG_FSL_BOOKE
-		case PPC_OPROFILE_BOOKE:
-			model = &op_model_fsl_booke;
+#if defined(CONFIG_FSL_EMB_PERFMON)
+		case PPC_OPROFILE_FSL_EMB:
+			model = &op_model_fsl_emb;
 			break;
 #endif
 		default:

arch/powerpc/oprofile/op_model_fsl_booke.c → arch/powerpc/oprofile/op_model_fsl_emb.c

@@ -1,7 +1,5 @@
 /*
- * arch/powerpc/oprofile/op_model_fsl_booke.c
- *
- * Freescale Book-E oprofile support, based on ppc64 oprofile support
+ * Freescale Embedded oprofile support, based on ppc64 oprofile support
  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc
@@ -22,7 +20,7 @@
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
-#include <asm/reg_booke.h>
+#include <asm/reg_fsl_emb.h>
 #include <asm/page.h>
 #include <asm/pmc.h>
 #include <asm/oprofile_impl.h>
@@ -244,7 +242,7 @@ static void dump_pmcs(void)
 			mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
 }
 
-static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
+static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
 {
 	int i;
 
@@ -262,7 +260,7 @@ static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
 	return 0;
 }
 
-static int fsl_booke_reg_setup(struct op_counter_config *ctr,
+static int fsl_emb_reg_setup(struct op_counter_config *ctr,
 			     struct op_system_config *sys,
 			     int num_ctrs)
 {
@@ -281,7 +279,7 @@ static int fsl_booke_reg_setup(struct op_counter_config *ctr,
 	return 0;
 }
 
-static int fsl_booke_start(struct op_counter_config *ctr)
+static int fsl_emb_start(struct op_counter_config *ctr)
 {
 	int i;
 
@@ -315,7 +313,7 @@ static int fsl_booke_start(struct op_counter_config *ctr)
 	return 0;
 }
 
-static void fsl_booke_stop(void)
+static void fsl_emb_stop(void)
 {
 	/* freeze counters */
 	pmc_stop_ctrs();
@@ -329,7 +327,7 @@ static void fsl_booke_stop(void)
 }
 
 
-static void fsl_booke_handle_interrupt(struct pt_regs *regs,
+static void fsl_emb_handle_interrupt(struct pt_regs *regs,
 				    struct op_counter_config *ctr)
 {
 	unsigned long pc;
@@ -362,10 +360,10 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs,
 	pmc_start_ctrs(1);
 }
 
-struct op_powerpc_model op_model_fsl_booke = {
-	.reg_setup		= fsl_booke_reg_setup,
-	.cpu_setup		= fsl_booke_cpu_setup,
-	.start			= fsl_booke_start,
-	.stop			= fsl_booke_stop,
-	.handle_interrupt	= fsl_booke_handle_interrupt,
+struct op_powerpc_model op_model_fsl_emb = {
+	.reg_setup		= fsl_emb_reg_setup,
+	.cpu_setup		= fsl_emb_cpu_setup,
+	.start			= fsl_emb_start,
+	.stop			= fsl_emb_stop,
+	.handle_interrupt	= fsl_emb_handle_interrupt,
 };

arch/powerpc/platforms/83xx/mpc832x_rdb.c

@@ -101,7 +101,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
 
-	if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
 

arch/powerpc/platforms/83xx/mpc83xx.h

@@ -14,6 +14,8 @@
 #define MPC83XX_SCCR_USB_DRCM_11   0x00300000
 #define MPC83XX_SCCR_USB_DRCM_01   0x00100000
 #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
+#define MPC8315_SCCR_USB_MASK      0x00c00000
+#define MPC8315_SCCR_USB_DRCM_11   0x00c00000
 #define MPC837X_SCCR_USB_DRCM_11   0x00c00000
 
 /* system i/o configuration register low */

arch/powerpc/platforms/83xx/usb.c

@@ -104,6 +104,7 @@ int mpc831x_usb_cfg(void)
 	u32 temp;
 	void __iomem *immap, *usb_regs;
 	struct device_node *np = NULL;
+	struct device_node *immr_node = NULL;
 	const void *prop;
 	struct resource res;
 	int ret = 0;
@@ -124,10 +125,15 @@ int mpc831x_usb_cfg(void)
 	}
 
 	/* Configure clock */
-	temp = in_be32(immap + MPC83XX_SCCR_OFFS);
-	temp &= ~MPC83XX_SCCR_USB_MASK;
-	temp |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
-	out_be32(immap + MPC83XX_SCCR_OFFS, temp);
+	immr_node = of_get_parent(np);
+	if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC8315_SCCR_USB_MASK,
+		                MPC8315_SCCR_USB_DRCM_11);
+	else
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC83XX_SCCR_USB_MASK,
+		                MPC83XX_SCCR_USB_DRCM_11);
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
@@ -144,6 +150,9 @@ int mpc831x_usb_cfg(void)
 
 	iounmap(immap);
 
+	if (immr_node)
+		of_node_put(immr_node);
+
 	/* Map USB SOC space */
 	ret = of_address_to_resource(np, 0, &res);
 	if (ret) {

arch/powerpc/platforms/8xx/adder875.c

@@ -15,12 +15,12 @@
 
 #include <asm/time.h>
 #include <asm/machdep.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/fs_pd.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
 
-#include <sysdev/commproc.h>
+#include "mpc8xx.h"
 
 struct cpm_pin {
 	int port, pin, flags;
@@ -108,7 +108,7 @@ define_machine(adder875) {
 	.name = "Adder MPC875",
 	.probe = adder875_probe,
 	.setup_arch = adder875_setup,
-	.init_IRQ = m8xx_pic_init,
+	.init_IRQ = mpc8xx_pics_init,
 	.get_irq = mpc8xx_get_irq,
 	.restart = mpc8xx_restart,
 	.calibrate_decr = generic_calibrate_decr,

arch/powerpc/platforms/8xx/ep88xc.c

@@ -15,7 +15,6 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/udbg.h>
-#include <asm/commproc.h>
 #include <asm/cpm1.h>
 
 #include "mpc8xx.h"