Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', 'x8…

…6-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hyper: Change hypervisor detection order

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix DNA exception during check_fpu()

* 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kexec, x86: Fix incorrect jump back address if not preserving context

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, config: Introduce an INTEL_MID configuration

* 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, quirks: Use pci_dev->revision

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: tsc: Remove unneeded DMI-based blacklisting

* 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit

arch/x86/Kconfig

@@ -390,12 +390,21 @@ config X86_INTEL_CE
 	  This option compiles in support for the CE4100 SOC for settop
 	  boxes and media devices.
 
+config X86_INTEL_MID
+	bool "Intel MID platform support"
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  Select to build a kernel capable of supporting Intel MID platform
+	  systems which do not have the PCI legacy interfaces (Moorestown,
+	  Medfield). If you are building for a PC class system say N here.
+
+if X86_INTEL_MID
+
 config X86_MRST
        bool "Moorestown MID platform"
 	depends on PCI
 	depends on PCI_GOANY
-	depends on X86_32
-	depends on X86_EXTENDED_PLATFORM
 	depends on X86_IO_APIC
 	select APB_TIMER
 	select I2C
@@ -410,6 +419,8 @@ config X86_MRST
 	  nor standard legacy replacement devices/features. e.g. Moorestown does
 	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
 
+endif
+
 config X86_RDC321X
 	bool "RDC R-321x SoC"
 	depends on X86_32

arch/x86/kernel/apic/apic.c

@@ -1944,10 +1944,28 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 
 void __cpuinit generic_processor_info(int apicid, int version)
 {
-	int cpu;
+	int cpu, max = nr_cpu_ids;
+	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
+				phys_cpu_present_map);
+
+	/*
+	 * If boot cpu has not been detected yet, then only allow upto
+	 * nr_cpu_ids - 1 processors and keep one slot free for boot cpu
+	 */
+	if (!boot_cpu_detected && num_processors >= nr_cpu_ids - 1 &&
+	    apicid != boot_cpu_physical_apicid) {
+		int thiscpu = max + disabled_cpus - 1;
+
+		pr_warning(
+			"ACPI: NR_CPUS/possible_cpus limit of %i almost"
+			" reached. Keeping one slot for boot cpu."
+			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
+
+		disabled_cpus++;
+		return;
+	}
 
 	if (num_processors >= nr_cpu_ids) {
-		int max = nr_cpu_ids;
 		int thiscpu = max + disabled_cpus;
 
 		pr_warning(

arch/x86/kernel/cpu/bugs.c

@@ -62,6 +62,8 @@ static void __init check_fpu(void)
 		return;
 	}
 
+	kernel_fpu_begin();
+
 	/*
 	 * trap_init() enabled FXSR and company _before_ testing for FP
 	 * problems here.
@@ -80,6 +82,8 @@ static void __init check_fpu(void)
 		: "=m" (*&fdiv_bug)
 		: "m" (*&x), "m" (*&y));
 
+	kernel_fpu_end();
+
 	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
 		printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");

arch/x86/kernel/cpu/hypervisor.c

@@ -32,11 +32,11 @@
  */
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-	&x86_hyper_vmware,
-	&x86_hyper_ms_hyperv,
 #ifdef CONFIG_XEN_PVHVM
 	&x86_hyper_xen_hvm,
 #endif
+	&x86_hyper_vmware,
+	&x86_hyper_ms_hyperv,
 };
 
 const struct hypervisor_x86 *x86_hyper;

arch/x86/kernel/quirks.c

@@ -10,16 +10,15 @@
 
 static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
 {
-	u8 config, rev;
+	u8 config;
 	u16 word;
 
 	/* BIOS may enable hardware IRQ balancing for
 	 * E7520/E7320/E7525(revision ID 0x9 and below)
 	 * based platforms.
 	 * Disable SW irqbalance/affinity on those platforms.
 	 */
-	pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
-	if (rev > 0x9)
+	if (dev->revision > 0x9)
 		return;
 
 	/* enable access to config space*/

arch/x86/kernel/relocate_kernel_32.S

@@ -97,6 +97,8 @@ relocate_kernel:
 	ret
 
 identity_mapped:
+	/* set return address to 0 if not preserving context */
+	pushl	$0
 	/* store the start address on the stack */
 	pushl   %edx
 

arch/x86/kernel/relocate_kernel_64.S

@@ -100,6 +100,8 @@ relocate_kernel:
 	ret
 
 identity_mapped:
+	/* set return address to 0 if not preserving context */
+	pushq	$0
 	/* store the start address on the stack */
 	pushq   %rdx
 

arch/x86/kernel/tsc.c

@@ -5,7 +5,6 @@
 #include <linux/timer.h>
 #include <linux/acpi_pmtmr.h>
 #include <linux/cpufreq.h>
-#include <linux/dmi.h>
 #include <linux/delay.h>
 #include <linux/clocksource.h>
 #include <linux/percpu.h>
@@ -800,27 +799,6 @@ void mark_tsc_unstable(char *reason)
 
 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 
-static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
-			d->ident);
-	tsc_unstable = 1;
-	return 0;
-}
-
-/* List of systems that have known TSC problems */
-static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
-	{
-		.callback = dmi_mark_tsc_unstable,
-		.ident = "IBM Thinkpad 380XD",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
-		},
-	},
-	{}
-};
-
 static void __init check_system_tsc_reliable(void)
 {
 #ifdef CONFIG_MGEODE_LX
@@ -1010,8 +988,6 @@ void __init tsc_init(void)
 	lpj_fine = lpj;
 
 	use_tsc_delay();
-	/* Check and install the TSC clocksource */
-	dmi_check_system(bad_tsc_dmi_table);
 
 	if (unsynchronized_tsc())
 		mark_tsc_unstable("TSCs unsynchronized");