---

yaml
---
r: 314857
b: refs/heads/master
c: d217249
h: refs/heads/master
i:
  314855: 4a7a7a1
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: da0b1baa94a9c11448e010a150280d0834b11c32
+refs/heads/master: d217249d7279d72b912d3c3a7938a3248b0af2ed

trunk/drivers/net/wireless/iwlwifi/dvm/agn.h

@@ -269,7 +269,7 @@ void iwl_scan_offchannel_skb_status(struct iwl_priv *priv);
 #define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
 #define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */
 
-#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 7)
+#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 15)
 
 
 /* bt coex */

trunk/drivers/net/wireless/iwlwifi/dvm/mac80211.c

@@ -1411,13 +1411,11 @@ static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
 }
 
 static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif,
-				enum nl80211_iftype newtype, bool newp2p)
+				       struct ieee80211_vif *vif,
+				       enum nl80211_iftype newtype, bool newp2p)
 {
 	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-	struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl_rxon_context *tmp;
+	struct iwl_rxon_context *ctx, *tmp;
 	enum nl80211_iftype newviftype = newtype;
 	u32 interface_modes;
 	int err;
@@ -1428,6 +1426,18 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mutex);
 
+	ctx = iwl_rxon_ctx_from_vif(vif);
+
+	/*
+	 * To simplify this code, only support changes on the
+	 * BSS context. The PAN context is usually reassigned
+	 * by creating/removing P2P interfaces anyway.
+	 */
+	if (ctx->ctxid != IWL_RXON_CTX_BSS) {
+		err = -EBUSY;
+		goto out;
+	}
+
 	if (!ctx->vif || !iwl_is_ready_rf(priv)) {
 		/*
 		 * Huh? But wait ... this can maybe happen when
@@ -1437,32 +1447,19 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
+	/* Check if the switch is supported in the same context */
 	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
-
 	if (!(interface_modes & BIT(newtype))) {
 		err = -EBUSY;
 		goto out;
 	}
 
-	/*
-	 * Refuse a change that should be done by moving from the PAN
-	 * context to the BSS context instead, if the BSS context is
-	 * available and can support the new interface type.
-	 */
-	if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif &&
-	    (bss_ctx->interface_modes & BIT(newtype) ||
-	     bss_ctx->exclusive_interface_modes & BIT(newtype))) {
-		BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
-		err = -EBUSY;
-		goto out;
-	}
-
 	if (ctx->exclusive_interface_modes & BIT(newtype)) {
 		for_each_context(priv, tmp) {
 			if (ctx == tmp)
 				continue;
 
-			if (!tmp->vif)
+			if (!tmp->is_active)
 				continue;
 
 			/*

trunk/drivers/net/wireless/iwlwifi/dvm/scan.c

@@ -720,6 +720,12 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		/*
+		 * Override quiet time as firmware checks that active
+		 * dwell is >= quiet; since we use passive scan it'll
+		 * not actually be used.
+		 */
+		scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		break;
 	case IWL_SCAN_NORMAL:
 		if (priv->scan_request->n_ssids) {

trunk/include/linux/ieee80211.h

@@ -567,6 +567,26 @@ struct ieee80211s_hdr {
 #define MESH_FLAGS_AE		0x3
 #define MESH_FLAGS_PS_DEEP	0x4
 
+/**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+	IEEE80211_PREQ_PROACTIVE_PREP_FLAG	= 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+	IEEE80211_PREQ_TO_FLAG	= 1<<0,
+	IEEE80211_PREQ_USN_FLAG	= 1<<2,
+};
+
 /**
  * struct ieee80211_quiet_ie
  *
@@ -1443,7 +1463,7 @@ enum ieee80211_tdls_actioncode {
  *
  * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
  * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
- * that will be specified in a vendor specific information element
+ *	that will be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
@@ -1455,7 +1475,7 @@ enum {
  *
  * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
  * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
+ *	be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_PROTOCOL_HWMP = 1,
@@ -1467,13 +1487,35 @@ enum {
  *
  * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
  * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
+ *	specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_METRIC_AIRTIME = 1,
 	IEEE80211_PATH_METRIC_VENDOR = 255,
 };
 
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ *	this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ *	the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ *	supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ *	the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+	IEEE80211_ROOTMODE_NO_ROOT = 0,
+	IEEE80211_ROOTMODE_ROOT = 1,
+	IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+	IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+	IEEE80211_PROACTIVE_RANN = 4,
+};
 
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
@@ -1589,6 +1631,8 @@ enum ieee80211_sa_query_action {
 
 #define WLAN_OUI_WFA			0x506f9a
 #define WLAN_OUI_TYPE_WFA_P2P		9
+#define WLAN_OUI_MICROSOFT		0x0050f2
+#define WLAN_OUI_TYPE_MICROSOFT_WPA	1
 
 /*
  * WMM/802.11e Tspec Element