---

yaml
---
r: 264116
b: refs/heads/master
c: a2b4910
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: df77abcafc8dc881b6c9347548651777088e4b27
+refs/heads/master: a2b49102daac7a1d90dc01bfc4350ef68aa1204d

trunk/Documentation/networking/dmfe.txt

@@ -1,3 +1,5 @@
+Note: This driver doesn't have a maintainer.
+
 Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
 
 This program is free software; you can redistribute it and/or
@@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases.
 Authors:
 
 Sten Wang <sten_wang@davicom.com.tw >   : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 
 Contributors:
 

trunk/Documentation/vm/transhuge.txt

@@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never".
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
 
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
 
 You can also control how many pages khugepaged should scan at each
 pass:

trunk/MAINTAINERS

@@ -1278,7 +1278,6 @@ F:	drivers/input/misc/ati_remote2.c
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
-M:	Jie Yang <jie.yang@atheros.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1574,7 +1573,6 @@ F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
-M:	Debashis Dutt <ddutt@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bna/
@@ -1758,7 +1756,6 @@ F:	Documentation/zh_CN/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
@@ -4415,7 +4412,8 @@ L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*

trunk/arch/arm/boot/dts/tegra-harmony.dts

@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

trunk/arch/arm/boot/dts/tegra-seaboard.dts

@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

trunk/arch/arm/mach-dove/common.c

@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************

trunk/arch/arm/mach-exynos4/clock.c

@@ -1160,7 +1160,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650);
+				__raw_readl(S5P_VPLL_CON1), pll_4650c);
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;

trunk/arch/arm/mach-exynos4/mct.c

@@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
 	return ((cycle_t)hi << 32) | lo;
 }
 
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
 struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
 };
 
 static void __init exynos4_clocksource_init(void)
@@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 }
 
 /* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
 	exynos4_mct_tick_init(evt);
+
+	return 0;
 }
 
 int local_timer_ack(void)

trunk/arch/arm/mach-exynos4/platsmp.c

@@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
+
+	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)

trunk/arch/arm/mach-exynos4/setup-keypad.c

@@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 
 	if (rows > 8) {
 		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 
 		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 	} else {
 		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 	}
 
 	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */

trunk/arch/arm/mach-integrator/integrator_ap.c

@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff

trunk/arch/arm/mach-integrator/pci_v3.c

@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors

trunk/arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
 	.cols		= 8,
 };
 
-static int smdk6410_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPF(15), "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
-	gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 255,
-	.dft_brightness	= 255,
-	.pwm_period_ns	= 78770,
-	.init		= smdk6410_backlight_init,
-	.exit		= smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &s3c_device_timer[1].dev,
-		.platform_data	= &smdk6410_backlight_data,
-	},
-};
-
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {

trunk/arch/arm/plat-samsung/clock.c

@@ -64,6 +64,17 @@ static LIST_HEAD(clocks);
  */
 DEFINE_SPINLOCK(clocks_lock);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+	s3c2410_wdtclk = clk_get(NULL, "watchdog");
+	if (IS_ERR(s3c2410_wdtclk))
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
 /* enable and disable calls for use with the clk struct */
 
 static int clk_null_enable(struct clk *clk, int enable)

trunk/arch/arm/plat-samsung/include/plat/clock.h

@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
 
@@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
 
 extern void s3c_pwmclk_init(void);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */

trunk/arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/clock.h>
 #include <plat/regs-watchdog.h>
 #include <mach/map.h>
 
@@ -19,17 +20,12 @@
 
 static inline void arch_wdt_reset(void)
 {
-	struct clk *wdtclk;
-
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	if (s3c2410_wdtclk)
+		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */
 	__raw_writel(0x80, S3C2410_WTCNT);

trunk/arch/s390/include/asm/pgtable.h

@@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
  * struct gmap_struct - guest address space
  * @mm: pointer to the parent mm_struct
  * @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
  * @crst_list: list of all crst tables used in the guest address space
  */
 struct gmap {
 	struct list_head list;
 	struct mm_struct *mm;
 	unsigned long *table;
+	unsigned long asce;
 	struct list_head crst_list;
 };
 

trunk/arch/s390/kernel/asm-offsets.c

@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <asm/vdso.h>
 #include <asm/sigp.h>
+#include <asm/pgtable.h>
 
 /*
  * Make sure that the compiler is new enough. We want a compiler that
@@ -126,6 +127,7 @@ int main(void)
 	DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
 	DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
 	DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+	DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
 	DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
 	DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
 	DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
@@ -151,6 +153,7 @@ int main(void)
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 #endif /* CONFIG_32BIT */
 	return 0;
 }

trunk/arch/s390/kernel/entry64.S

@@ -1076,13 +1076,19 @@ sie_loop:
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 	tm	__TI_flags+7(%r14),_TIF_EXIT_SIE
 	jnz	sie_exit
+	lg	%r14,__LC_GMAP			# get gmap pointer
+	ltgr	%r14,%r14
+	jz	sie_gmap
+	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
+sie_gmap:
 	lg	%r14,__SF_EMPTY(%r15)		# get control block pointer
 	SPP	__SF_EMPTY(%r15)		# set guest id
 	sie	0(%r14)
 sie_done:
 	SPP	__LC_CMF_HPP			# set host id
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 sie_exit:
+	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	ni	__TI_flags+6(%r14),255-(_TIF_SIE>>8)
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
 	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13