---

yaml
---
r: 303517
b: refs/heads/master
c: c06cd9b
h: refs/heads/master
i:
  303515: 6d6fc4e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ff3e660b5a881b401b2b6735aa5334f433237dcb
+refs/heads/master: c06cd9bfcad4960023bac1f052da748824e24961

trunk/arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+	};
+};

trunk/arch/arm/mach-kirkwood/Kconfig

@@ -58,6 +58,12 @@ config MACH_DREAMPLUG_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DreamPlug (Flattened Device Tree).
 
+config MACH_ICONNECT_DT
+	bool "Iomega Iconnect (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here to enable Iomega Iconnect support.
+
 config MACH_DLINK_KIRKWOOD_DT
 	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT

trunk/arch/arm/mach-kirkwood/Makefile

@@ -22,4 +22,5 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
+obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o

trunk/arch/arm/mach-kirkwood/Makefile.boot

@@ -5,3 +5,4 @@ initrd_phys-y	:= 0x00800000
 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
+dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb

trunk/arch/arm/mach-kirkwood/board-dt.c

@@ -59,13 +59,17 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("dlink,dns-kirkwood"))
 		dnskw_init();
 
+	if (of_machine_is_compatible("iom,iconnect"))
+		iconnect_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
 	"dlink,dns-320",
 	"dlink,dns-325",
+	"iom,iconnect",
 	NULL
 };
 

trunk/arch/arm/mach-kirkwood/board-iconnect.c

@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-kirkwood/board-iconnect.c
+ *
+ * Iomega i-connect Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name		= "led_level",
+		.gpio		= 41,
+		.default_trigger = "default-on",
+	}, {
+		.name		= "power:blue",
+		.gpio		= 42,
+		.default_trigger = "timer",
+	}, {
+		.name		= "power:red",
+		.gpio		= 43,
+	}, {
+		.name		= "usb1:blue",
+		.gpio		= 44,
+	}, {
+		.name		= "usb2:blue",
+		.gpio		= 45,
+	}, {
+		.name		= "usb3:blue",
+		.gpio		= 46,
+	}, {
+		.name		= "usb4:blue",
+		.gpio		= 47,
+	}, {
+		.name		= "otb:blue",
+		.gpio		= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+	.gpio_blink_set	= orion_gpio_led_blink_set,
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO,
+	MPP35_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct i2c_board_info __initdata iconnect_board_info[] = {
+	{
+		I2C_BOARD_INFO("lm63", 0x4c),
+	},
+};
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "flash",
+		.offset = 0,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+/* yikes... theses are the original input buttons */
+/* but I'm not convinced by the sw event choices  */
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= SW_LID,
+		.gpio		= 12,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	}, {
+		.type		= EV_SW,
+		.code		= SW_TABLET_MODE,
+		.gpio		= 35,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev        = {
+		.platform_data  = &iconnect_button_data,
+	},
+};
+
+void __init iconnect_init(void)
+{
+	kirkwood_mpp_conf(iconnect_mpp_config);
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, iconnect_board_info,
+		ARRAY_SIZE(iconnect_board_info));
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&iconnect_ge00_data);
+
+	platform_device_register(&iconnect_button_device);
+	platform_device_register(&iconnect_leds);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (of_machine_is_compatible("iom,iconnect"))
+		kirkwood_pcie_init(KW_PCIE0);
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);

trunk/arch/arm/mach-kirkwood/common.h

@@ -64,6 +64,12 @@ void dnskw_init(void);
 static inline void dnskw_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_ICONNECT_DT
+void iconnect_init(void);
+#else
+static inline void iconnect_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);