Merge branch 'topic/asoc' into for-linus

Documentation/sound/alsa/soc/dapm.txt

@@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------

arch/arm/mach-pxa/e740.c

@@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/e750.c

@@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/h5000.c

@@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = {
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
 };
 
 /*

arch/arm/mach-pxa/include/mach/eseries-gpio.h

@@ -45,6 +45,21 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2  16
+#define GPIO_E740_MIC_ON         40
+#define GPIO_E740_AMP_ON         41
+
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF      4
+#define GPIO_E750_SPK_AMP_OFF     7
+#define GPIO_E750_HP_DETECT      37
+
+/* e800 audio control GPIOs */
+#define GPIO_E800_HP_DETECT      81
+#define GPIO_E800_HP_AMP_OFF     82
+#define GPIO_E800_SPK_AMP_ON     83
+
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19

arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -50,7 +50,7 @@
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
@@ -109,6 +109,11 @@
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
+#if defined(CONFIG_PXA3xx)
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#endif
+
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */

arch/arm/mach-pxa/spitz.c

@@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO57_nIOIS16,
 	GPIO104_PSKTSEL,
 
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,

arch/arm/mach-s3c2410/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {

arch/arm/mach-s3c2412/dma.c

@@ -29,8 +29,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-s3c2412-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }

arch/arm/mach-s3c2440/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {

arch/arm/mach-s3c2443/dma.c

@@ -29,7 +29,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \

include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h → arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h

@@ -33,6 +33,9 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
+#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
+
 #define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
 #define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
 #define S3C2412_IISMOD_SLAVE		(2 << 10)
@@ -44,8 +47,8 @@
 #define S3C2412_IISMOD_LR_LLOW		(0 << 7)
 #define S3C2412_IISMOD_LR_RLOW		(1 << 7)
 #define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
 #define S3C2412_IISMOD_SDF_MASK		(3 << 5)
 #define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
 #define S3C2412_IISMOD_RCLK_512FS	(1 << 3)

include/linux/mfd/wm8350/audio.h

@@ -490,6 +490,7 @@
 /*
  * R231 (0xE7) - Jack Status
  */
+#define WM8350_JACK_L_LVL			0x0800
 #define WM8350_JACK_R_LVL                       0x0400
 
 /*

include/linux/mfd/wm8400-audio.h

@@ -1181,6 +1181,7 @@
 #define WM8400_FLL_OUTDIV_SHIFT                      0  /* FLL_OUTDIV - [2:0] */
 #define WM8400_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [2:0] */
 
+struct wm8400;
 void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400);
 
 #endif

include/sound/pxa2xx-lib.h

@@ -42,4 +42,19 @@ extern int pxa2xx_ac97_hw_resume(void);
 extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
 extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
 
+/* AC97 platform_data */
+/**
+ * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+ *
+ * Platform data should only be specified for pxa27x CPUs where a silicon bug
+ * prevents correct operation of the reset line. If not specified, the default
+ * behaviour is to consider gpio 113 as the AC97 reset line, which is the
+ * default on most boards.
+ */
+struct pxa2xx_ac97_platform_data {
+	int reset_gpio;
+};
+
 #endif

include/sound/soc-dai.h

@@ -203,7 +203,7 @@ struct snd_soc_dai {
 	int (*resume)(struct snd_soc_dai *dai);
 
 	/* ops */
-	struct snd_soc_dai_ops ops;
+	struct snd_soc_dai_ops *ops;
 
 	/* DAI capabilities */
 	struct snd_soc_pcm_stream capture;

include/sound/soc-dapm.h

@@ -76,6 +76,11 @@
 	 wcontrols, wncontrols)\
 {	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
 	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \
+	 wcontrols, wncontrols)\
+{       .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, .kcontrols = wcontrols, \
+	.num_kcontrols = wncontrols}
 #define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
 	.invert = winvert, .kcontrols = NULL, .num_kcontrols = 0}
@@ -101,6 +106,11 @@
 {	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
 	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \
 	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \
+	wcontrols, wncontrols, wevent, wflags) \
+{       .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrols = wcontrols, \
+	.num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \
 {	.id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
 	.invert = winvert, .kcontrols = NULL, .num_kcontrols = 0, \
@@ -182,6 +192,12 @@
 	.get = snd_soc_dapm_get_value_enum_double, \
 	.put = snd_soc_dapm_put_value_enum_double, \
 	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_PIN_SWITCH(xname) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname " Switch", \
+	.info = snd_soc_dapm_info_pin_switch, \
+	.get = snd_soc_dapm_get_pin_switch, \
+	.put = snd_soc_dapm_put_pin_switch, \
+	.private_value = (unsigned long)xname }
 
 /* dapm stream operations */
 #define SND_SOC_DAPM_STREAM_NOP			0x0
@@ -228,6 +244,12 @@ int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *uncontrol);
+int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *uncontrol);
 int snd_soc_dapm_new_control(struct snd_soc_codec *codec,
 	const struct snd_soc_dapm_widget *widget);
 int snd_soc_dapm_new_controls(struct snd_soc_codec *codec,
@@ -250,10 +272,10 @@ int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
 int snd_soc_dapm_sys_add(struct device *dev);
 
 /* dapm audio pin control and status */
-int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin);
+int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin);
 int snd_soc_dapm_sync(struct snd_soc_codec *codec);
 
 /* dapm widget types */
@@ -263,6 +285,7 @@ enum snd_soc_dapm_type {
 	snd_soc_dapm_mux,			/* selects 1 analog signal from many inputs */
 	snd_soc_dapm_value_mux,			/* selects 1 analog signal from many inputs */
 	snd_soc_dapm_mixer,			/* mixes several analog signals together */
+	snd_soc_dapm_mixer_named_ctl,		/* mixer with named controls */
 	snd_soc_dapm_pga,			/* programmable gain/attenuation (volume) */
 	snd_soc_dapm_adc,			/* analog to digital converter */
 	snd_soc_dapm_dac,			/* digital to analog converter */