ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c

The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/plat-s3c/Makefile

@@ -28,6 +28,10 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o

arch/arm/plat-s3c24xx/pwm.c → arch/arm/plat-s3c/pwm.c

@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
  *
  * Copyright (c) 2007 Ben Dooks
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX PWM device core
+ * S3C series PWM device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/pwm.h>
 
 #include <mach/irqs.h>
+#include <mach/map.h>
 
 #include <plat/devs.h>
 #include <plat/regs-timer.h>

arch/arm/plat-s3c24xx/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o