---

yaml
---
r: 75664
b: refs/heads/master
c: d1154be
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9c09a95cf431fcf5720f2e408befa24b32b8cf4d
+refs/heads/master: d1154be3004e9db2d61533e16bb2cf85dd27a8cb

trunk/Documentation/local_ops.txt

@@ -45,6 +45,29 @@ long fails. The definition looks like :
 typedef struct { atomic_long_t a; } local_t;
 
 
+* Rules to follow when using local atomic operations
+
+- Variables touched by local ops must be per cpu variables.
+- _Only_ the CPU owner of these variables must write to them.
+- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
+  to update its local_t variables.
+- Preemption (or interrupts) must be disabled when using local ops in
+  process context to   make sure the process won't be migrated to a
+  different CPU between getting the per-cpu variable and doing the
+  actual local op.
+- When using local ops in interrupt context, no special care must be
+  taken on a mainline kernel, since they will run on the local CPU with
+  preemption already disabled. I suggest, however, to explicitly
+  disable preemption anyway to make sure it will still work correctly on
+  -rt kernels.
+- Reading the local cpu variable will provide the current copy of the
+  variable.
+- Reads of these variables can be done from any CPU, because updates to
+  "long", aligned, variables are always atomic. Since no memory
+  synchronization is done by the writer CPU, an outdated copy of the
+  variable can be read when reading some _other_ cpu's variables.
+
+
 * Rules to follow when using local atomic operations
 
 - Variables touched by local ops must be per cpu variables.

trunk/Documentation/networking/driver.txt

@@ -61,10 +61,7 @@ Transmit path guidelines:
 2) Do not forget to update netdev->trans_start to jiffies after
    each new tx packet is given to the hardware.
 
-3) A hard_start_xmit method must not modify the shared parts of a
-   cloned SKB.
-
-4) Do not forget that once you return 0 from your hard_start_xmit
+3) Do not forget that once you return 0 from your hard_start_xmit
    method, it is your driver's responsibility to free up the SKB
    and in some finite amount of time.
 

trunk/Documentation/networking/wavelan.txt

@@ -12,8 +12,8 @@ and many Linux driver to support it.
 "wavelan" driver (old ISA Wavelan)
 ----------------
 	o Config :	Network device -> Wireless LAN -> AT&T WaveLAN
-	o Location :	.../drivers/net/wireless/wavelan*
-	o in-line doc :	.../drivers/net/wireless/wavelan.p.h
+	o Location :	.../drivers/net/wavelan*
+	o in-line doc :	.../drivers/net/wavelan.p.h
 	o on-line doc :
 	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
 

trunk/Documentation/watchdog/watchdog-api.txt

@@ -42,27 +42,23 @@ like this source file:  see Documentation/watchdog/src/watchdog-simple.c
 A more advanced driver could for example check that a HTTP server is
 still responding before doing the write call to ping the watchdog.
 
-When the device is closed, the watchdog is disabled, unless the "Magic
-Close" feature is supported (see below).  This is not always such a
-good idea, since if there is a bug in the watchdog daemon and it
-crashes the system will not reboot.  Because of this, some of the
-drivers support the configuration option "Disable watchdog shutdown on
-close", CONFIG_WATCHDOG_NOWAYOUT.  If it is set to Y when compiling
-the kernel, there is no way of disabling the watchdog once it has been
-started.  So, if the watchdog daemon crashes, the system will reboot
-after the timeout has passed. Watchdog devices also usually support
-the nowayout module parameter so that this option can be controlled at
-runtime.
-
-Magic Close feature:
-
-If a driver supports "Magic Close", the driver will not disable the
-watchdog unless a specific magic character 'V' has been sent to
-/dev/watchdog just before closing the file.  If the userspace daemon
-closes the file without sending this special character, the driver
-will assume that the daemon (and userspace in general) died, and will
-stop pinging the watchdog without disabling it first.  This will then
-cause a reboot if the watchdog is not re-opened in sufficient time.
+When the device is closed, the watchdog is disabled.  This is not
+always such a good idea, since if there is a bug in the watchdog
+daemon and it crashes the system will not reboot.  Because of this,
+some of the drivers support the configuration option "Disable watchdog
+shutdown on close", CONFIG_WATCHDOG_NOWAYOUT.  If it is set to Y when
+compiling the kernel, there is no way of disabling the watchdog once
+it has been started.  So, if the watchdog daemon crashes, the system
+will reboot after the timeout has passed. Watchdog devices also usually
+support the nowayout module parameter so that this option can be controlled
+at runtime.
+
+Drivers will not disable the watchdog, unless a specific magic character 'V'
+has been sent /dev/watchdog just before closing the file.  If the userspace
+daemon closes the file without sending this special character, the driver
+will assume that the daemon (and userspace in general) died, and will stop
+pinging the watchdog without disabling it first.  This will then cause a
+reboot if the watchdog is not re-opened in sufficient time.
 
 The ioctl API:
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 24
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc7
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*
@@ -12,7 +12,7 @@ NAME = Arr Matey! A Hairy Bilge Rat!
 
 # Do not:
 # o  use make's built-in rules and variables
-#    (this increases performance and avoids hard-to-debug behaviour);
+#    (this increases performance and avoid hard-to-debug behavour);
 # o  print "Entering directory ...";
 MAKEFLAGS += -rR --no-print-directory
 
@@ -1329,7 +1329,7 @@ else
 ALLINCLUDE_ARCHS := $(SRCARCH)
 endif
 else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
 endif
 

trunk/arch/alpha/math-emu/math.c

@@ -225,7 +225,7 @@ alpha_fp_emul (unsigned long pc)
 				FP_UNPACK_SP(SB, &vb);
 				DR_c = DB_c;
 				DR_s = DB_s;
-				DR_e = DB_e + (1024 - 128);
+				DR_e = DB_e;
 				DR_f = SB_f << (52 - 23);
 				goto pack_d;
 			}

trunk/arch/arm/Kconfig

@@ -1072,13 +1072,11 @@ source "drivers/rtc/Kconfig"
 
 source "drivers/dma/Kconfig"
 
-source "drivers/dca/Kconfig"
-
 endmenu
 
 source "fs/Kconfig"
 
-source "arch/arm/Kconfig.instrumentation"
+source "kernel/Kconfig.instrumentation"
 
 source "arch/arm/Kconfig.debug"
 

trunk/arch/arm/mach-omap1/board-fsample.c

@@ -40,29 +40,31 @@ static int fsample_keymap[] = {
 	KEY(0,1,KEY_RIGHT),
 	KEY(0,2,KEY_LEFT),
 	KEY(0,3,KEY_DOWN),
-	KEY(0,4,KEY_ENTER),
-	KEY(1,0,KEY_F10),
+	KEY(0,4,KEY_CENTER),
+	KEY(0,5,KEY_0_5),
+	KEY(1,0,KEY_SOFT2),
 	KEY(1,1,KEY_SEND),
 	KEY(1,2,KEY_END),
 	KEY(1,3,KEY_VOLUMEDOWN),
 	KEY(1,4,KEY_VOLUMEUP),
 	KEY(1,5,KEY_RECORD),
-	KEY(2,0,KEY_F9),
+	KEY(2,0,KEY_SOFT1),
 	KEY(2,1,KEY_3),
 	KEY(2,2,KEY_6),
 	KEY(2,3,KEY_9),
-	KEY(2,4,KEY_KPDOT),
+	KEY(2,4,KEY_SHARP),
+	KEY(2,5,KEY_2_5),
 	KEY(3,0,KEY_BACK),
 	KEY(3,1,KEY_2),
 	KEY(3,2,KEY_5),
 	KEY(3,3,KEY_8),
 	KEY(3,4,KEY_0),
-	KEY(3,5,KEY_KPSLASH),
+	KEY(3,5,KEY_HEADSETHOOK),
 	KEY(4,0,KEY_HOME),
 	KEY(4,1,KEY_1),
 	KEY(4,2,KEY_4),
 	KEY(4,3,KEY_7),
-	KEY(4,4,KEY_KPASTERISK),
+	KEY(4,4,KEY_STAR),
 	KEY(4,5,KEY_POWER),
 	0
 };

trunk/arch/arm/mach-omap1/board-nokia770.c

@@ -36,6 +36,8 @@
 #include <asm/arch/omapfb.h>
 #include <asm/arch/lcd_mipid.h>
 
+#include "../plat-omap/dsp/dsp_common.h"
+
 #define ADS7846_PENDOWN_GPIO	15
 
 static void __init omap_nokia770_init_irq(void)
@@ -316,8 +318,6 @@ static __init int omap_dsp_init(void)
  out:
 	return ret;
 }
-#else
-#define omap_dsp_init()		do {} while (0)
 #endif	/* CONFIG_OMAP_DSP */
 
 static void __init omap_nokia770_init(void)

trunk/arch/arm/mach-omap1/board-perseus2.c

@@ -39,29 +39,31 @@ static int p2_keymap[] = {
 	KEY(0,1,KEY_RIGHT),
 	KEY(0,2,KEY_LEFT),
 	KEY(0,3,KEY_DOWN),
-	KEY(0,4,KEY_ENTER),
-	KEY(1,0,KEY_F10),
+	KEY(0,4,KEY_CENTER),
+	KEY(0,5,KEY_0_5),
+	KEY(1,0,KEY_SOFT2),
 	KEY(1,1,KEY_SEND),
 	KEY(1,2,KEY_END),
 	KEY(1,3,KEY_VOLUMEDOWN),
 	KEY(1,4,KEY_VOLUMEUP),
 	KEY(1,5,KEY_RECORD),
-	KEY(2,0,KEY_F9),
+	KEY(2,0,KEY_SOFT1),
 	KEY(2,1,KEY_3),
 	KEY(2,2,KEY_6),
 	KEY(2,3,KEY_9),
-	KEY(2,4,KEY_KPDOT),
+	KEY(2,4,KEY_SHARP),
+	KEY(2,5,KEY_2_5),
 	KEY(3,0,KEY_BACK),
 	KEY(3,1,KEY_2),
 	KEY(3,2,KEY_5),
 	KEY(3,3,KEY_8),
 	KEY(3,4,KEY_0),
-	KEY(3,5,KEY_KPSLASH),
+	KEY(3,5,KEY_HEADSETHOOK),
 	KEY(4,0,KEY_HOME),
 	KEY(4,1,KEY_1),
 	KEY(4,2,KEY_4),
 	KEY(4,3,KEY_7),
-	KEY(4,4,KEY_KPASTERISK),
+	KEY(4,4,KEY_STAR),
 	KEY(4,5,KEY_POWER),
 	0
 };

trunk/arch/arm/mach-pxa/sleep.S

@@ -43,11 +43,11 @@ pxa_cpu_save_cp:
 pxa_cpu_save_sp:
 	@ preserve phys address of stack
 	mov	r0, sp
-	str	lr, [sp, #-4]!
+	mov	r2, lr
 	bl	sleep_phys_sp
 	ldr	r1, =sleep_save_sp
 	str	r0, [r1]
-	ldr	pc, [sp], #4
+	mov	pc, r2
 
 /*
  * pxa27x_cpu_suspend()
@@ -270,3 +270,5 @@ resume_after_mmu:
 	mar	acc0, r2, r3
 #endif
 	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
+
+

trunk/arch/blackfin/Kconfig

@@ -65,10 +65,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config HARDWARE_PM
-	def_bool y
-	depends on OPROFILE
-
 source "init/Kconfig"
 source "kernel/Kconfig.preempt"
 

trunk/arch/cris/arch-v10/kernel/io_interface_mux.c

@@ -392,7 +392,6 @@ int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id
 	if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) ||
 	    ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) ||
 	    ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) {
-		local_irq_restore(flags);
 		printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n",
 		       ioif);
 		return -EBUSY;