staging: comedi: amplc_dio200: allow extra clock and gate sources

One of the enhancements of the new PCIe boards is the addition of extra
clock and gate sources.  Allow clock and gate sources up to 31 for these
boards (compared to 7 for the old boards) although most of those are
reserved for future use.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/amplc_dio200.c

@@ -120,6 +120,14 @@
  *         the SK1 connector.  This pin is shared by all three counter
  *         channels on the chip.
  *
+ *     For the PCIe boards, clock sources in the range 0 to 31 are allowed
+ *     and the following additional clock sources are defined:
+ *
+ *       8.  HIGH logic level.
+ *       9.  LOW logic level.
+ *      10.  "Pattern present" signal.
+ *      11.  Internal 20 MHz clock.
+ *
  *   INSN_CONFIG_GET_CLOCK_SRC.  Returns the counter channel's current
  *     clock source in data[1].  For internal clock sources, data[2] is set
  *     to the period in ns.
@@ -141,6 +149,27 @@
  *       6.  Reserved.
  *       7.  Reserved.
  *
+ *     For the PCIe boards, gate sources in the range 0 to 31 are allowed;
+ *     the following additional clock sources and clock sources 6 and 7 are
+ *     (re)defined:
+ *
+ *       6.  /GAT n, negated version of the counter channel's dedicated
+ *         GAT input (negated version of gate source 2).
+ *       7.  OUT n-2, the non-inverted output of counter channel n-2
+ *         (negated version of gate source 3).
+ *       8.  "Pattern present" signal, HIGH while pattern present.
+ *       9.  "Pattern occurred" latched signal, latches HIGH when pattern
+ *         occurs.
+ *      10.  "Pattern gone away" latched signal, latches LOW when pattern
+ *         goes away after it occurred.
+ *      11.  Negated "pattern present" signal, LOW while pattern present
+ *         (negated version of gate source 8).
+ *      12.  Negated "pattern occurred" latched signal, latches LOW when
+ *         pattern occurs (negated version of gate source 9).
+ *      13.  Negated "pattern gone away" latched signal, latches LOW when
+ *         pattern goes away after it occurred (negated version of gate
+ *         source 10).
+ *
  *   INSN_CONFIG_GET_GATE_SRC.  Returns the counter channel's current gate
  *     source in data[2].
  *
@@ -274,28 +303,43 @@
 #define DIO200_VERSION		0x24	/* Hardware version register */
 
 /*
- * Macros for constructing value for DIO_200_?CLK_SCE and
+ * Functions for constructing value for DIO_200_?CLK_SCE and
  * DIO_200_?GAT_SCE registers:
  *
  * 'which' is: 0 for CTR-X1, CTR-Y1, CTR-Z1; 1 for CTR-X2, CTR-Y2 or CTR-Z2.
  * 'chan' is the channel: 0, 1 or 2.
- * 'source' is the signal source: 0 to 7.
+ * 'source' is the signal source: 0 to 7, or 0 to 31 for "enhanced" boards.
  */
-#define CLK_SCE(which, chan, source) (((which) << 5) | ((chan) << 3) | (source))
-#define GAT_SCE(which, chan, source) (((which) << 5) | ((chan) << 3) | (source))
+static unsigned char clk_gat_sce(unsigned int which, unsigned int chan,
+				 unsigned int source)
+{
+	return (which << 5) | (chan << 3) |
+	       ((source & 030) << 3) | (source & 007);
+}
+
+static unsigned char clk_sce(unsigned int which, unsigned int chan,
+			     unsigned int source)
+{
+	return clk_gat_sce(which, chan, source);
+}
+
+static unsigned char gat_sce(unsigned int which, unsigned int chan,
+			     unsigned int source)
+{
+	return clk_gat_sce(which, chan, source);
+}
 
 /*
  * Periods of the internal clock sources in nanoseconds.
  */
-static const unsigned clock_period[8] = {
-	0,			/* dedicated clock input/output pin */
-	100,			/* 10 MHz */
-	1000,			/* 1 MHz */
-	10000,			/* 100 kHz */
-	100000,			/* 10 kHz */
-	1000000,		/* 1 kHz */
-	0,			/* OUT N-1 */
-	0			/* group clock input pin */
+static const unsigned int clock_period[32] = {
+	[1] = 100,		/* 10 MHz */
+	[2] = 1000,		/* 1 MHz */
+	[3] = 10000,		/* 100 kHz */
+	[4] = 100000,		/* 10 kHz */
+	[5] = 1000000,		/* 1 kHz */
+	[11] = 50,		/* 20 MHz (enhanced boards) */
+	/* clock sources 12 and later reserved for enhanced boards */
 };
 
 /*
@@ -1220,11 +1264,11 @@ dio200_subdev_8254_set_gate_src(struct comedi_device *dev,
 		return -1;
 	if (counter_number > 2)
 		return -1;
-	if (gate_src > 7)
+	if (gate_src > (layout->has_enhancements ? 31 : 7))
 		return -1;
 
 	subpriv->gate_src[counter_number] = gate_src;
-	byte = GAT_SCE(subpriv->which, counter_number, gate_src);
+	byte = gat_sce(subpriv->which, counter_number, gate_src);
 	dio200_write8(dev, subpriv->gat_sce_ofs, byte);
 
 	return 0;
@@ -1266,11 +1310,11 @@ dio200_subdev_8254_set_clock_src(struct comedi_device *dev,
 		return -1;
 	if (counter_number > 2)
 		return -1;
-	if (clock_src > 7)
+	if (clock_src > (layout->has_enhancements ? 31 : 7))
 		return -1;
 
 	subpriv->clock_src[counter_number] = clock_src;
-	byte = CLK_SCE(subpriv->which, counter_number, clock_src);
+	byte = clk_sce(subpriv->which, counter_number, clock_src);
 	dio200_write8(dev, subpriv->clk_sce_ofs, byte);
 
 	return 0;