Merge branch 'lpc32xx/core' of git://git.antcom.de/linux-2.6 into nex…

…t/soc

Patches from Roland Stigge <stigge@antcom.de>:

  Platform topic branch for lpc32xx

* 'lpc32xx/core' of git://git.antcom.de/linux-2.6:
  ARM: LPC32xx: Add the motor PWM clock
  ARM: LPC32xx: Cleanup irq.c
  ARM: LPC32xx: Relocate calls to irq_set_chained_handler()
  ARM: LPC32xx: Remove superfluous irq_alloc_descs()

Includes an update to v3.7-rc4

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

MAINTAINERS

@@ -503,7 +503,7 @@ F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/fam15h_power
@@ -2507,6 +2507,7 @@ M:	Joonyoung Shim <jy0922.shim@samsung.com>
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
@@ -5647,7 +5648,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Peter Osterlund <petero2@telia.com>
+M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

arch/arm/mach-lpc32xx/clock.c

@@ -585,6 +585,13 @@ static struct clk clk_timer3 = {
 	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
 	.get_rate	= local_return_parent_rate,
 };
+static struct clk clk_mpwm = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
+	.get_rate	= local_return_parent_rate,
+};
 static struct clk clk_wdt = {
 	.parent		= &clk_pclk,
 	.enable		= local_onoff_enable,
@@ -1202,6 +1209,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
 	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
 	CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
+	CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
 	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
 	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
 	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),

arch/arm/mach-lpc32xx/include/mach/platform.h

@@ -515,6 +515,7 @@
 /*
  * clkpwr_timers_pwms_clk_ctrl_1 register definitions
  */
+#define LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN	0x40
 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN	0x20
 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN	0x10
 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN	0x08

arch/arm/mach-lpc32xx/irq.c

@@ -412,7 +412,6 @@ static const struct of_device_id mic_of_match[] __initconst = {
 void __init lpc32xx_init_irq(void)
 {
 	unsigned int i;
-	int irq_base;
 
 	/* Setup MIC */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
@@ -443,15 +442,6 @@ void __init lpc32xx_init_irq(void)
 	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
 	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
 
-	/* mask all interrupts except SUBIRQ */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-
-	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
-	irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
-	irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
-
 	/* Initially disable all wake events */
 	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
 	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
@@ -475,16 +465,13 @@ void __init lpc32xx_init_irq(void)
 
 	of_irq_init(mic_of_match);
 
-	irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0);
-	if (irq_base < 0) {
-		pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n");
-		irq_base = 0;
-	}
-
 	lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
-						   irq_base, 0,
-						   &irq_domain_simple_ops,
+						   0, 0, &irq_domain_simple_ops,
 						   NULL);
 	if (!lpc32xx_mic_domain)
 		panic("Unable to add MIC irq domain\n");
+
+	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
+	irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
+	irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
 }

arch/arm/xen/hypercall.S

@@ -48,20 +48,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
 #include <xen/interface/xen.h>
 
 
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
 
 #define HYPERCALL_SIMPLE(hypercall)		\
 ENTRY(HYPERVISOR_##hypercall)			\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc;							\
+	__HVC(XEN_IMM);						\
 	mov pc, lr;							\
 ENDPROC(HYPERVISOR_##hypercall)
 
@@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall)			\
 	stmdb sp!, {r4}						\
 	ldr r4, [sp, #4]					\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc								\
+	__HVC(XEN_IMM);						\
 	ldm sp!, {r4}						\
 	mov pc, lr							\
 ENDPROC(HYPERVISOR_##hypercall)
@@ -100,7 +96,7 @@ ENTRY(privcmd_call)
 	mov r2, r3
 	ldr r3, [sp, #8]
 	ldr r4, [sp, #4]
-	xen_hvc
+	__HVC(XEN_IMM)
 	ldm sp!, {r4}
 	mov pc, lr
 ENDPROC(privcmd_call);

arch/frv/Kconfig

@@ -13,6 +13,7 @@ config FRV
 	select GENERIC_CPU_DEVICES
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 
 config ZONE_DMA
 	bool

arch/frv/boot/Makefile

@@ -17,6 +17,8 @@ PARAMS_PHYS	 = 0x0207c000
 INITRD_PHYS	 = 0x02180000
 INITRD_VIRT	 = 0x02180000
 
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment
+
 #
 # If you don't define ZRELADDR above,
 # then it defaults to ZTEXTADDR
@@ -32,18 +34,18 @@ Image: $(obj)/Image
 targets: $(obj)/Image
 
 $(obj)/Image: vmlinux FORCE
-	$(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
 
 #$(obj)/Image:	$(CONFIGURE) $(SYSTEM)
-#	$(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+#	$(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
 
 bzImage: zImage
 
 zImage:	$(CONFIGURE) compressed/$(LINUX)
-	$(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
 
 bootpImage: bootp/bootp
-	$(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
 
 compressed/$(LINUX): $(LINUX) dep
 	@$(MAKE) -C compressed $(LINUX)

arch/frv/include/asm/unistd.h

@@ -30,7 +30,6 @@
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
 
 /*
  * "Conditional" syscalls

arch/frv/kernel/entry.S

@@ -869,11 +869,6 @@ ret_from_kernel_thread:
 	call		schedule_tail
 	calll.p		@(gr21,gr0)
 	or		gr20,gr20,gr8
-	bra		sys_exit
-
-	.globl		ret_from_kernel_execve
-ret_from_kernel_execve:
-	ori		gr28,0,sp
 	bra		__syscall_exit
 
 ###################################################################################################
@@ -1080,27 +1075,10 @@ __entry_return_from_kernel_interrupt:
 	subicc		gr5,#0,gr0,icc0
 	beq		icc0,#0,__entry_return_direct
 
-__entry_preempt_need_resched:
-	ldi		@(gr15,#TI_FLAGS),gr4
-	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
-	beq		icc0,#1,__entry_return_direct
-
-	setlos		#PREEMPT_ACTIVE,gr5
-	sti		gr5,@(gr15,#TI_FLAGS)
-
-	andi		gr23,#~PSR_PIL,gr23
-	movgs		gr23,psr
-
-	call		schedule
-	sti		gr0,@(gr15,#TI_PRE_COUNT)
-
-	movsg		psr,gr23
-	ori		gr23,#PSR_PIL_14,gr23
-	movgs		gr23,psr
-	bra		__entry_preempt_need_resched
-#else
-	bra		__entry_return_direct
+	subcc		gr0,gr0,gr0,icc2		/* set Z and clear C */
+	call		preempt_schedule_irq
 #endif
+	bra		__entry_return_direct
 
 
 ###############################################################################

arch/frv/kernel/process.c

@@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags,
 	childregs = (struct pt_regs *)
 		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
 
+	/* set up the userspace frame (the only place that the USP is stored) */
+	*childregs = *__kernel_frame0_ptr;
+
 	p->set_child_tid = p->clear_child_tid = NULL;
 
 	p->thread.frame	 = childregs;
@@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags,
 	p->thread.frame0 = childregs;
 
 	if (unlikely(!regs)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->gr9 = usp; /* function */
 		childregs->gr8 = arg;
-		childregs->psr = PSR_S;
 		p->thread.pc = (unsigned long) ret_from_kernel_thread;
 		save_user_regs(p->thread.user);
 		return 0;

arch/frv/mb93090-mb00/pci-dma-nommu.c

@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/pci.h>

arch/x86/include/asm/xen/hypervisor.h

@@ -33,7 +33,6 @@
 #ifndef _ASM_X86_XEN_HYPERVISOR_H
 #define _ASM_X86_XEN_HYPERVISOR_H
 
-/* arch/i386/kernel/setup.c */
 extern struct shared_info *HYPERVISOR_shared_info;
 extern struct start_info *xen_start_info;