Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (22 commits)
  PCI Hotplug: move pci_hotplug.h to include/linux/
  change pci hotplug subsystem maintainer to Kristen
  PCI: optionally sort device lists breadth-first
  cpcihp_generic: prevent loading without "bridge" parameter
  pci: Additional search functions
  PCI: quirks: switch quirks code offender to use pci_get API
  PCI: Update MSI-HOWTO.txt according to pci_msi_supported()
  PCI: Improve pci_msi_supported() comments
  PCI hotplug: ioremap balanced with iounmap
  shpchp: remove unnecessary cmd_busy member from struct controller
  shpchp: fix command completion check
  pci: Stamp out pci_find_* usage in fakephp
  PCI: fix pcie_portdrv_restore_config undefined without CONFIG_PM error
  Fix DMA resource allocation in ACPIPnP
  PCI: Turn pci_fixup_video into generic for embedded VGA
  PCI: add ICH7/8 ACPI/GPIO io resource quirks
  PCI: pcie-check-and-return-bus_register-errors fix
  PCI: VIA IRQ quirk behaviour change
  pciehp: Remove unnecessary check in pciehp_ctrl.c
  pciehp - add missing locking
  ...

Documentation/MSI-HOWTO.txt

@@ -470,7 +470,68 @@ LOC:     324553     325068
 ERR:          0
 MIS:          0
 
-6. FAQ
+6. MSI quirks
+
+Several PCI chipsets or devices are known to not support MSI.
+The PCI stack provides 3 possible levels of MSI disabling:
+* on a single device
+* on all devices behind a specific bridge
+* globally
+
+6.1. Disabling MSI on a single device
+
+Under some circumstances, it might be required to disable MSI on a
+single device, It may be achived by either not calling pci_enable_msi()
+or all, or setting the pci_dev->no_msi flag before (most of the time
+in a quirk).
+
+6.2. Disabling MSI below a bridge
+
+The vast majority of MSI quirks are required by PCI bridges not
+being able to route MSI between busses. In this case, MSI have to be
+disabled on all devices behind this bridge. It is achieves by setting
+the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
+subordinate bus. There is no need to set the same flag on bridges that
+are below the broken brigde. When pci_enable_msi() is called to enable
+MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
+flag in all parent busses of the device.
+
+Some bridges actually support dynamic MSI support enabling/disabling
+by changing some bits in their PCI configuration space (especially
+the Hypertransport chipsets such as the nVidia nForce and Serverworks
+HT2000). It may then be required to update the NO_MSI flag on the
+corresponding devices in the sysfs hierarchy. To enable MSI support
+on device "0000:00:0e", do:
+
+	echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
+
+To disable MSI support, echo 0 instead of 1. Note that it should be
+used with caution since changing this value might break interrupts.
+
+6.3. Disabling MSI globally
+
+Some extreme cases may require to disable MSI globally on the system.
+For now, the only known case is a Serverworks PCI-X chipsets (MSI are
+not supported on several busses that are not all connected to the
+chipset in the Linux PCI hierarchy). In the vast majority of other
+cases, disabling only behind a specific bridge is enough.
+
+For debugging purpose, the user may also pass pci=nomsi on the kernel
+command-line to explicitly disable MSI globally. But, once the appro-
+priate quirks are added to the kernel, this option should not be
+required anymore.
+
+6.4. Finding why MSI cannot be enabled on a device
+
+Assuming that MSI are not enabled on a device, you should look at
+dmesg to find messages that quirks may output when disabling MSI
+on some devices, some bridges or even globally.
+Then, lspci -t gives the list of bridges above a device. Reading
+/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
+are enabled (1) or disabled (0). In 0 is found in a single bridge
+msi_bus file above the device, MSI cannot be enabled.
+
+7. FAQ
 
 Q1. Are there any limitations on using the MSI?
 

Documentation/kernel-parameters.txt

@@ -1231,6 +1231,11 @@ and is between 256 and 4096 characters. It is defined in the file
 				machine check when some devices' config space
 				is read. But various workarounds are disabled
 				and some IOMMU drivers will not work.
+		bfsort		Sort PCI devices into breadth-first order.
+				This sorting is done to get a device
+				order compatible with older (<= 2.4) kernels.
+		nobfsort	Don't sort PCI devices into breadth-first order.
+
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]

MAINTAINERS

@@ -2309,8 +2309,8 @@ T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 PCI HOTPLUG CORE
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+P: 	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
 S:	Supported
 
 PCI HOTPLUG COMPAQ DRIVER

arch/i386/pci/common.c

@@ -20,6 +20,7 @@
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
+int pci_bf_sort;
 int pci_routeirq;
 int pcibios_last_bus = -1;
 unsigned long pirq_table_addr;
@@ -117,6 +118,20 @@ void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 	pci_read_bridge_bases(b);
 }
 
+/*
+ * Only use DMI information to set this if nothing was passed
+ * on the kernel command line (which was parsed earlier).
+ */
+
+static int __devinit set_bf_sort(struct dmi_system_id *d)
+{
+	if (pci_bf_sort == pci_bf_sort_default) {
+		pci_bf_sort = pci_dmi_bf;
+		printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
+	}
+	return 0;
+}
+
 /*
  * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
  */
@@ -130,11 +145,11 @@ static int __devinit assign_all_busses(struct dmi_system_id *d)
 }
 #endif
 
+static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
+#ifdef __i386__
 /*
  * Laptops which need pci=assign-busses to see Cardbus cards
  */
-static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
-#ifdef __i386__
 	{
 		.callback = assign_all_busses,
 		.ident = "Samsung X20 Laptop",
@@ -144,6 +159,38 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 		},
 	},
 #endif		/* __i386__ */
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 1950",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 1955",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 2900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 2950",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
+		},
+	},
 	{}
 };
 
@@ -189,6 +236,8 @@ static int __init pcibios_init(void)
 
 	pcibios_resource_survey();
 
+	if (pci_bf_sort >= pci_force_bf)
+		pci_sort_breadthfirst();
 #ifdef CONFIG_PCI_BIOS
 	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
 		pcibios_sort();
@@ -203,6 +252,12 @@ char * __devinit  pcibios_setup(char *str)
 	if (!strcmp(str, "off")) {
 		pci_probe = 0;
 		return NULL;
+	} else if (!strcmp(str, "bfsort")) {
+		pci_bf_sort = pci_force_bf;
+		return NULL;
+	} else if (!strcmp(str, "nobfsort")) {
+		pci_bf_sort = pci_force_nobf;
+		return NULL;
 	}
 #ifdef CONFIG_PCI_BIOS
 	else if (!strcmp(str, "bios")) {

arch/i386/pci/fixup.c

@@ -342,51 +342,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PB1,	pcie_r
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC,	pcie_rootport_aspm_quirk );
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC1,	pcie_rootport_aspm_quirk );
 
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video 
- * card will have it's BIOS copied to C0000 in system RAM. 
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
- */
-
-static void __devinit pci_fixup_video(struct pci_dev *pdev)
-{
-	struct pci_dev *bridge;
-	struct pci_bus *bus;
-	u16 config;
-
-	if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
-		return;
-
-	/* Is VGA routed to us? */
-	bus = pdev->bus;
-	while (bus) {
-		bridge = bus->self;
-		if (bridge) {
-			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
-						&config);
-			if (!(config & PCI_BRIDGE_CTL_VGA))
-				return;
-		}
-		bus = bus->parent;
-	}
-	pci_read_config_word(pdev, PCI_COMMAND, &config);
-	if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
-		pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-		printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
-
 /*
  * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
  *

arch/i386/pci/pci.h

@@ -30,6 +30,13 @@
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
 
+enum pci_bf_sort_state {
+	pci_bf_sort_default,
+	pci_force_nobf,
+	pci_force_bf,
+	pci_dmi_bf,
+};
+
 /* pci-i386.c */
 
 extern unsigned int pcibios_max_latency;

drivers/pci/hotplug/acpi_pcihp.c

@@ -29,10 +29,10 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>
-#include "pci_hotplug.h"
 
 #define MY_NAME	"acpi_pcihp"
 

drivers/pci/hotplug/acpiphp.h

@@ -38,7 +38,7 @@
 #include <linux/acpi.h>
 #include <linux/kobject.h>	/* for KOBJ_NAME_LEN */
 #include <linux/mutex.h>
-#include "pci_hotplug.h"
+#include <linux/pci_hotplug.h>
 
 #define dbg(format, arg...)					\
 	do {							\

drivers/pci/hotplug/acpiphp_core.c

@@ -37,10 +37,10 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
-#include "pci_hotplug.h"
 #include "acpiphp.h"
 
 #define MY_NAME	"acpiphp"

drivers/pci/hotplug/acpiphp_glue.c

@@ -45,11 +45,11 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/smp_lock.h>
 #include <linux/mutex.h>
 
 #include "../pci.h"
-#include "pci_hotplug.h"
 #include "acpiphp.h"
 
 static LIST_HEAD(bridge_list);

drivers/pci/hotplug/acpiphp_ibm.c

@@ -35,7 +35,6 @@
 #include <linux/moduleparam.h>
 
 #include "acpiphp.h"
-#include "pci_hotplug.h"
 
 #define DRIVER_VERSION	"1.0.1"
 #define DRIVER_AUTHOR	"Irene Zubarev <zubarev@us.ibm.com>, Vernon Mauery <vernux@us.ibm.com>"

drivers/pci/hotplug/cpci_hotplug_core.c

@@ -29,12 +29,12 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/smp_lock.h>
 #include <asm/atomic.h>
 #include <linux/delay.h>
-#include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
 #define DRIVER_AUTHOR	"Scott Murray <scottm@somanetworks.com>"

drivers/pci/hotplug/cpci_hotplug_pci.c

@@ -26,9 +26,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/proc_fs.h>
 #include "../pci.h"
-#include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
 #define MY_NAME	"cpci_hotplug"

drivers/pci/hotplug/cpcihp_generic.c

@@ -84,7 +84,7 @@ static int __init validate_parameters(void)
 
 	if(!bridge) {
 		info("not configured, disabling.");
-		return 1;
+		return -EINVAL;
 	}
 	str = bridge;
 	if(!*str)
@@ -147,7 +147,7 @@ static int __init cpcihp_generic_init(void)
 
 	info(DRIVER_DESC " version: " DRIVER_VERSION);
 	status = validate_parameters();
-	if(status != 0)
+	if (status)
 		return status;
 
 	r = request_region(port, 1, "#ENUM hotswap signal register");

drivers/pci/hotplug/cpqphp.h

@@ -28,7 +28,6 @@
 #ifndef _CPQPHP_H
 #define _CPQPHP_H
 
-#include "pci_hotplug.h"
 #include <linux/interrupt.h>
 #include <asm/io.h>		/* for read? and write? functions */
 #include <linux/delay.h>	/* for delays */

drivers/pci/hotplug/cpqphp_core.c

@@ -37,6 +37,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 

drivers/pci/hotplug/cpqphp_ctrl.c

@@ -36,6 +36,7 @@
 #include <linux/wait.h>
 #include <linux/smp_lock.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include "cpqphp.h"
 
 static u32 configure_new_device(struct controller* ctrl, struct pci_func *func,

drivers/pci/hotplug/cpqphp_nvram.c

@@ -33,6 +33,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include "cpqphp.h"

drivers/pci/hotplug/cpqphp_pci.c

@@ -33,6 +33,7 @@
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include "../pci.h"
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"