---

yaml --- r: 120368 b: refs/heads/master c: ff75427 h: refs/heads/master v: v3
git-mirror · Dec 20, 2008 · b6e0ff1 · b6e0ff1
1 parent e5e3dab
commit b6e0ff1
Show file tree

Hide file tree

Showing 570 changed files with 10,322 additions and 5,801 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 55fa518867978e1f5fd8353098f80d125ac734d7
+refs/heads/master: ff75427a7f641c4468610fbda2ccb69218174cd1
diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt
@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

diff --git a/trunk/Documentation/cpu-freq/user-guide.txt b/trunk/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

diff --git a/trunk/Documentation/filesystems/ocfs2.txt b/trunk/Documentation/filesystems/ocfs2.txt
@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt
@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+
diff --git a/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

diff --git a/trunk/Documentation/input/input-programming.txt b/trunk/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

diff --git a/trunk/Documentation/local_ops.txt b/trunk/Documentation/local_ops.txt
@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {

diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

diff --git a/trunk/Documentation/spi/spi-summary b/trunk/Documentation/spi/spi-summary
@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{

diff --git a/trunk/Documentation/tracers/mmiotrace.txt b/trunk/Documentation/tracers/mmiotrace.txt
@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -779,6 +779,7 @@ ATM
 P:	Chas Williams
 M:	chas@cmf.nrl.navy.mil
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
@@ -3758,6 +3759,15 @@ M:	drzeus-sdhci@drzeus.cx
 L:	sdhci-devel@list.drzeus.cx
 S:	Maintained
 
+SECURITY SUBSYSTEM
+F:	security/
+P:	James Morris
+M:	jmorris@namei.org
+L:	linux-kernel@vger.kernel.org
+L:	linux-security-module@vger.kernel.org (suggested Cc:)
+T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S:	Supported
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org
@@ -4235,7 +4245,7 @@ M:	dedekind@infradead.org
 P:	Adrian Hunter
 M:	ext-adrian.hunter@nokia.com
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubifs-2.6.git
+T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
 S:	Maintained
 
@@ -4289,7 +4299,7 @@ P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubi-2.6.git
+T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 
 USB ACM DRIVER

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc8
+NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

diff --git a/trunk/arch/Kconfig b/trunk/arch/Kconfig
@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

diff --git a/trunk/arch/alpha/kernel/pci.c b/trunk/arch/alpha/kernel/pci.c
@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c
@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

diff --git a/trunk/arch/alpha/kernel/traps.c b/trunk/arch/alpha/kernel/traps.c
@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

diff --git a/trunk/arch/arm/configs/corgi_defconfig b/trunk/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set

diff --git a/trunk/arch/arm/include/asm/bitops.h b/trunk/arch/arm/include/asm/bitops.h
@@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 #if __LINUX_ARM_ARCH__ < 5
 
 #include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/ffs.h>
@@ -277,16 +278,19 @@ static inline int constant_fls(int x)
  * the clz instruction for much better code efficiency.
  */
 
-#define __fls(x) \
-	( __builtin_constant_p(x) ? constant_fls(x) : \
-	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-
-/* Implement fls() in C so that 64-bit args are suitably truncated */
 static inline int fls(int x)
 {
-	return __fls(x);
+	int ret;
+
+	if (__builtin_constant_p(x))
+	       return constant_fls(x);
+
+	asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+       	ret = 32 - ret;
+	return ret;
 }
 
+#define __fls(x) (fls(x) - 1)
 #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
 #define __ffs(x) (ffs(x) - 1)
 #define ffz(x) __ffs( ~(x) )

diff --git a/trunk/arch/arm/include/asm/processor.h b/trunk/arch/arm/include/asm/processor.h
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 
 #ifdef __KERNEL__
-#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+#define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
 			 TASK_SIZE : TASK_SIZE_26)
 #define STACK_TOP_MAX	TASK_SIZE
 #endif

diff --git a/trunk/arch/arm/mach-omap1/io.c b/trunk/arch/arm/mach-omap1/io.c
@@ -128,7 +128,7 @@ void __init omap1_map_common_io(void)
  * Common low-level hardware init for omap1. This should only get called from
  * board specific init.
  */
-void __init omap1_init_common_hw()
+void __init omap1_init_common_hw(void)
 {
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".

diff --git a/trunk/arch/arm/mach-pxa/mioa701.c b/trunk/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 

diff --git a/trunk/arch/arm/mach-pxa/mioa701_bootresume.S b/trunk/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)