OHCI: remove uses of hcd->state

This patch (as1500) removes all uses of the objectionable hcd->state
variable from the ohci-hcd family of drivers.  It is replaced by a
private ohci->rh_state field, just as in uhci-hcd and ehci-hcd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ohci-au1xxx.c

@@ -173,12 +173,9 @@ static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
 	 * mark HW unaccessible, bail out if RH has been resumed. Use
 	 * the spinlock to properly synchronize with possible pending
 	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
 	 */
 	spin_lock_irqsave(&ohci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
+	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 		rc = -EINVAL;
 		goto bail;
 	}

drivers/usb/host/ohci-dbg.c

@@ -127,6 +127,19 @@ static char *hcfs2string (int state)
 	return "?";
 }
 
+static const char *rh_state_string(struct ohci_hcd *ohci)
+{
+	switch (ohci->rh_state) {
+	case OHCI_RH_HALTED:
+		return "halted";
+	case OHCI_RH_SUSPENDED:
+		return "suspended";
+	case OHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
 // dump control and status registers
 static void
 ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
@@ -136,9 +149,10 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
 
 	temp = ohci_readl (controller, &regs->revision) & 0xff;
 	ohci_dbg_sw (controller, next, size,
-		"OHCI %d.%d, %s legacy support registers\n",
+		"OHCI %d.%d, %s legacy support registers, rh state %s\n",
 		0x03 & (temp >> 4), (temp & 0x0f),
-		(temp & 0x0100) ? "with" : "NO");
+		(temp & 0x0100) ? "with" : "NO",
+		rh_state_string(controller));
 
 	temp = ohci_readl (controller, &regs->control);
 	ohci_dbg_sw (controller, next, size,

drivers/usb/host/ohci-ep93xx.c

@@ -179,8 +179,6 @@ static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_
 	ohci->next_statechange = jiffies;
 
 	ep93xx_stop_hc(&pdev->dev);
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 

drivers/usb/host/ohci-hcd.c

@@ -209,7 +209,7 @@ static int ohci_urb_enqueue (
 		retval = -ENODEV;
 		goto fail;
 	}
-	if (!HC_IS_RUNNING(hcd->state)) {
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
 		retval = -ENODEV;
 		goto fail;
 	}
@@ -274,7 +274,7 @@ static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 	if (rc) {
 		;	/* Do nothing */
-	} else if (HC_IS_RUNNING(hcd->state)) {
+	} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 		urb_priv_t  *urb_priv;
 
 		/* Unless an IRQ completed the unlink while it was being
@@ -321,7 +321,7 @@ ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 rescan:
 	spin_lock_irqsave (&ohci->lock, flags);
 
-	if (!HC_IS_RUNNING (hcd->state)) {
+	if (ohci->rh_state != OHCI_RH_RUNNING) {
 sanitize:
 		ed->state = ED_IDLE;
 		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
@@ -377,6 +377,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci)
 	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 	ohci->hc_control &= OHCI_CTRL_RWC;
 	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	ohci->rh_state = OHCI_RH_HALTED;
 }
 
 /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
@@ -503,7 +504,7 @@ static int ohci_init (struct ohci_hcd *ohci)
 	if (distrust_firmware)
 		ohci->flags |= OHCI_QUIRK_HUB_POWER;
 
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 	ohci->regs = hcd->regs;
 
 	/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
@@ -578,7 +579,7 @@ static int ohci_run (struct ohci_hcd *ohci)
 	int			first = ohci->fminterval == 0;
 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
 
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 
 	/* boot firmware should have set this up (5.1.1.3.1) */
 	if (first) {
@@ -691,7 +692,7 @@ static int ohci_run (struct ohci_hcd *ohci)
 	ohci->hc_control &= OHCI_CTRL_RWC;
 	ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
-	hcd->state = HC_STATE_RUNNING;
+	ohci->rh_state = OHCI_RH_RUNNING;
 
 	/* wake on ConnectStatusChange, matching external hubs */
 	ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@@ -728,7 +729,6 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	// POTPGT delay is bits 24-31, in 2 ms units.
 	mdelay ((val >> 23) & 0x1fe);
-	hcd->state = HC_STATE_RUNNING;
 
 	if (quirk_zfmicro(ohci)) {
 		/* Create timer to watch for bad queue state on ZF Micro */
@@ -764,7 +764,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	 * of dead, unclocked, or unplugged (CardBus...) devices
 	 */
 	if (ints == ~(u32)0) {
-		disable (ohci);
+		ohci->rh_state = OHCI_RH_HALTED;
 		ohci_dbg (ohci, "device removed!\n");
 		usb_hc_died(hcd);
 		return IRQ_HANDLED;
@@ -774,7 +774,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	ints &= ohci_readl(ohci, &regs->intrenable);
 
 	/* interrupt for some other device? */
-	if (ints == 0 || unlikely(hcd->state == HC_STATE_HALT))
+	if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
 		return IRQ_NOTMINE;
 
 	if (ints & OHCI_INTR_UE) {
@@ -789,8 +789,8 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 
 			schedule_work (&ohci->nec_work);
 		} else {
-			disable (ohci);
 			ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
+			ohci->rh_state = OHCI_RH_HALTED;
 			usb_hc_died(hcd);
 		}
 
@@ -874,11 +874,11 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	if ((ints & OHCI_INTR_SF) != 0
 			&& !ohci->ed_rm_list
 			&& !ohci->ed_to_check
-			&& HC_IS_RUNNING(hcd->state))
+			&& ohci->rh_state == OHCI_RH_RUNNING)
 		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 	spin_unlock (&ohci->lock);
 
-	if (HC_IS_RUNNING(hcd->state)) {
+	if (ohci->rh_state == OHCI_RH_RUNNING) {
 		ohci_writel (ohci, ints, &regs->intrstatus);
 		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 		// flush those writes
@@ -932,7 +932,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
 	struct urb_priv *priv;
 
 	spin_lock_irq(&ohci->lock);
-	disable (ohci);
+	ohci->rh_state = OHCI_RH_HALTED;
 
 	/* Recycle any "live" eds/tds (and urbs). */
 	if (!list_empty (&ohci->pending))

drivers/usb/host/ohci-hub.c

@@ -111,6 +111,7 @@ __acquires(ohci->lock)
 	if (!autostop) {
 		ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 		ohci->autostop = 0;
+		ohci->rh_state = OHCI_RH_SUSPENDED;
 	}
 
 done:
@@ -140,7 +141,7 @@ __acquires(ohci->lock)
 
 	if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 		/* this can happen after resuming a swsusp snapshot */
-		if (hcd->state == HC_STATE_RESUMING) {
+		if (ohci->rh_state != OHCI_RH_RUNNING) {
 			ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
 					ohci->hc_control);
 			status = -EBUSY;
@@ -274,6 +275,7 @@ __acquires(ohci->lock)
 		(void) ohci_readl (ohci, &ohci->regs->control);
 	}
 
+	ohci->rh_state = OHCI_RH_RUNNING;
 	return 0;
 }
 
@@ -336,11 +338,8 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 	/* If needed, reinitialize and suspend the root hub */
 	if (need_reinit) {
 		spin_lock_irq(&ohci->lock);
-		hcd->state = HC_STATE_RESUMING;
 		ohci_rh_resume(ohci);
-		hcd->state = HC_STATE_QUIESCING;
 		ohci_rh_suspend(ohci, 0);
-		hcd->state = HC_STATE_SUSPENDED;
 		spin_unlock_irq(&ohci->lock);
 	}
 

drivers/usb/host/ohci-omap.c

@@ -516,7 +516,6 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
 	ohci->next_statechange = jiffies;
 
 	omap_ohci_clock_power(0);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 

drivers/usb/host/ohci-pci.c

@@ -334,12 +334,9 @@ static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * mark HW unaccessible, bail out if RH has been resumed. Use
 	 * the spinlock to properly synchronize with possible pending
 	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
 	 */
 	spin_lock_irqsave (&ohci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
+	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 		rc = -EINVAL;
 		goto bail;
 	}

drivers/usb/host/ohci-pxa27x.c

@@ -502,8 +502,6 @@ static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
 	ohci->ohci.next_statechange = jiffies;
 
 	pxa27x_stop_hc(ohci, dev);
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 

drivers/usb/host/ohci-q.c

@@ -912,7 +912,7 @@ finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
-		if (likely (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))) {
+		if (likely(ohci->rh_state == OHCI_RH_RUNNING)) {
 			if (tick_before (tick, ed->tick)) {
 skip_ed:
 				last = &ed->ed_next;
@@ -1012,7 +1012,7 @@ finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 
 		/* but if there's work queued, reschedule */
 		if (!list_empty (&ed->td_list)) {
-			if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state))
+			if (ohci->rh_state == OHCI_RH_RUNNING)
 				ed_schedule (ohci, ed);
 		}
 
@@ -1021,9 +1021,7 @@ finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 	}
 
 	/* maybe reenable control and bulk lists */
-	if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
-			&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
-			&& !ohci->ed_rm_list) {
+	if (ohci->rh_state == OHCI_RH_RUNNING && !ohci->ed_rm_list) {
 		u32	command = 0, control = 0;
 
 		if (ohci->ed_controltail) {

drivers/usb/host/ohci-sh.c

@@ -29,7 +29,6 @@ static int ohci_sh_start(struct usb_hcd *hcd)
 	ohci_hcd_init(ohci);
 	ohci_init(ohci);
 	ohci_run(ohci);
-	hcd->state = HC_STATE_RUNNING;
 	return 0;
 }
 

drivers/usb/host/ohci-sm501.c

@@ -224,7 +224,6 @@ static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
 	ohci->next_statechange = jiffies;
 
 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 

drivers/usb/host/ohci-spear.c

@@ -203,7 +203,6 @@ static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
 	ohci->next_statechange = jiffies;
 
 	spear_stop_ohci(ohci_p);
-	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
 	return 0;
 }
 

drivers/usb/host/ohci-tmio.c

@@ -318,9 +318,6 @@ static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t s
 		if (ret)
 			return ret;
 	}
-
-	hcd->state = HC_STATE_SUSPENDED;
-
 	return 0;
 }
 

drivers/usb/host/ohci.h

@@ -344,6 +344,12 @@ typedef struct urb_priv {
  * a subset of what the full implementation needs. (Linus)
  */
 
+enum ohci_rh_state {
+	OHCI_RH_HALTED,
+	OHCI_RH_SUSPENDED,
+	OHCI_RH_RUNNING
+};
+
 struct ohci_hcd {
 	spinlock_t		lock;
 
@@ -384,6 +390,7 @@ struct ohci_hcd {
 	/*
 	 * driver state
 	 */
+	enum ohci_rh_state	rh_state;
 	int			num_ports;
 	int			load [NUM_INTS];
 	u32			hc_control;	/* copy of hc control reg */
@@ -680,11 +687,6 @@ static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
 
 /*-------------------------------------------------------------------------*/
 
-static inline void disable (struct ohci_hcd *ohci)
-{
-	ohci_to_hcd(ohci)->state = HC_STATE_HALT;
-}
-
 #define	FI			0x2edf		/* 12000 bits per frame (-1) */
 #define	FSMP(fi)		(0x7fff & ((6 * ((fi) - 210)) / 7))
 #define	FIT			(1 << 31)
@@ -708,7 +710,7 @@ static inline void periodic_reinit (struct ohci_hcd *ohci)
 #define read_roothub(hc, register, mask) ({ \
 	u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
 	if (temp == -1) \
-		disable (hc); \
+		hc->rh_state = OHCI_RH_HALTED; \
 	else if (hc->flags & OHCI_QUIRK_AMD756) \
 		while (temp & mask) \
 			temp = ohci_readl (hc, &hc->regs->roothub.register); \