Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/ker…

…nel/git/jgarzik/netdev-2.6

drivers/net/8139too.c

@@ -168,7 +168,7 @@ static int debug = -1;
  * Warning: 64K ring has hardware issues and may lock up.
  */
 #if defined(CONFIG_SH_DREAMCAST)
-#define RX_BUF_IDX	1	/* 16K ring */
+#define RX_BUF_IDX 0	/* 8K ring */
 #else
 #define RX_BUF_IDX	2	/* 32K ring */
 #endif

drivers/net/Kconfig

@@ -931,6 +931,14 @@ config ENC28J60_WRITEVERIFY
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
+config DM9000_DEBUGLEVEL
+	int "DM9000 maximum debug level"
+	depends on DM9000
+	default 4
+	help
+	  The maximum level of debugging code compiled into the DM9000
+	  driver.
+
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
@@ -2352,6 +2360,16 @@ config GELIC_NET
 	  To compile this driver as a module, choose M here: the
 	  module will be called ps3_gelic.
 
+config GELIC_WIRELESS
+       bool "PS3 Wireless support"
+       depends on GELIC_NET
+       help
+        This option adds the support for the wireless feature of PS3.
+        If you have the wireless-less model of PS3 or have no plan to
+        use wireless feature, disabling this option saves memory.  As
+        the driver automatically distinguishes the models, you can
+        safely enable this option even if you have a wireless-less model.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC

drivers/net/Makefile

@@ -70,7 +70,8 @@ obj-$(CONFIG_BNX2X) += bnx2x.o
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
 obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-ps3_gelic-objs += ps3_gelic_net.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o

drivers/net/cxgb3/l2t.c

@@ -404,7 +404,7 @@ void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh)
 			if (neigh->nud_state & NUD_FAILED) {
 				arpq = e->arpq_head;
 				e->arpq_head = e->arpq_tail = NULL;
-			} else if (neigh_is_connected(neigh))
+			} else if (neigh->nud_state & (NUD_CONNECTED|NUD_STALE))
 				setup_l2e_send_pending(dev, NULL, e);
 		} else {
 			e->state = neigh_is_connected(neigh) ?

drivers/net/cxgb3/sge.c

@@ -1059,6 +1059,14 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
 			 htonl(V_WR_TID(q->token)));
 }
 
+static inline void t3_stop_queue(struct net_device *dev, struct sge_qset *qs,
+				 struct sge_txq *q)
+{
+	netif_stop_queue(dev);
+	set_bit(TXQ_ETH, &qs->txq_stopped);
+	q->stops++;
+}
+
 /**
  *	eth_xmit - add a packet to the Ethernet Tx queue
  *	@skb: the packet
@@ -1090,31 +1098,18 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	ndesc = calc_tx_descs(skb);
 
 	if (unlikely(credits < ndesc)) {
-		if (!netif_queue_stopped(dev)) {
-			netif_stop_queue(dev);
-			set_bit(TXQ_ETH, &qs->txq_stopped);
-			q->stops++;
-			dev_err(&adap->pdev->dev,
-				"%s: Tx ring %u full while queue awake!\n",
-				dev->name, q->cntxt_id & 7);
-		}
+		t3_stop_queue(dev, qs, q);
+		dev_err(&adap->pdev->dev,
+			"%s: Tx ring %u full while queue awake!\n",
+			dev->name, q->cntxt_id & 7);
 		spin_unlock(&q->lock);
 		return NETDEV_TX_BUSY;
 	}
 
 	q->in_use += ndesc;
-	if (unlikely(credits - ndesc < q->stop_thres)) {
-		q->stops++;
-		netif_stop_queue(dev);
-		set_bit(TXQ_ETH, &qs->txq_stopped);
-#if !USE_GTS
-		if (should_restart_tx(q) &&
-		    test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
-			q->restarts++;
-			netif_wake_queue(dev);
-		}
-#endif
-	}
+	if (unlikely(credits - ndesc < q->stop_thres))
+		if (USE_GTS || !should_restart_tx(q))
+			t3_stop_queue(dev, qs, q);
 
 	gen = q->gen;
 	q->unacked += ndesc;