staging: et131x: Remove struct mi_regs from et1310_phy.h

This structure is no longer used, and references registers defined in mii.h and other parts of et1310_phy.h

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/et131x/et1310_phy.h

@@ -61,6 +61,11 @@
 
 #include "et1310_address_map.h"
 
+/*
+ * Defines for generic MII registers 0x00 -> 0x0F can be found in
+ * include/linux/mii.h
+ */
+
 /* some defines for modem registers that seem to be 'reserved' */
 #define PHY_INDEX_REG              0x10
 #define PHY_DATA_REG               0x11
@@ -80,35 +85,6 @@
 					/* TRU_VMI_LINK_CONTROL_REG       29 */
 					/* TRU_VMI_TIMING_CONTROL_REG        */
 
-/* PHY Register Mapping(MI) Management Interface Regs */
-struct mi_regs {
-	u8 bmcr;	/* Basic mode control reg(Reg 0x00) */
-	u8 bmsr;	/* Basic mode status reg(Reg 0x01) */
-	u8 idr1;	/* Phy identifier reg 1(Reg 0x02) */
-	u8 idr2;	/* Phy identifier reg 2(Reg 0x03) */
-	u8 anar;	/* Auto-Negotiation advertisement(Reg 0x04) */
-	u8 anlpar;	/* Auto-Negotiation link Partner Ability(Reg 0x05) */
-	u8 aner;	/* Auto-Negotiation expansion reg(Reg 0x06) */
-	u8 annptr;	/* Auto-Negotiation next page transmit reg(Reg 0x07) */
-	u8 lpnpr;	/* link partner next page reg(Reg 0x08) */
-	u8 gcr;		/* Gigabit basic mode control reg(Reg 0x09) */
-	u8 gsr;		/* Gigabit basic mode status reg(Reg 0x0A) */
-	u8 mi_res1[4];	/* Future use by MI working group(Reg 0x0B - 0x0E) */
-	u8 esr;		/* Extended status reg(Reg 0x0F) */
-	u8 mi_res2[3];	/* Future use by MI working group(Reg 0x10 - 0x12) */
-	u8 loop_ctl;	/* Loopback Control Reg(Reg 0x13) */
-	u8 mi_res3;	/* Future use by MI working group(Reg 0x14) */
-	u8 mcr;		/* MI Control Reg(Reg 0x15) */
-	u8 pcr;		/* Configuration Reg(Reg 0x16) */
-	u8 phy_ctl;	/* PHY Control Reg(Reg 0x17) */
-	u8 imr;		/* Interrupt Mask Reg(Reg 0x18) */
-	u8 isr;		/* Interrupt Status Reg(Reg 0x19) */
-	u8 psr;		/* PHY Status Reg(Reg 0x1A) */
-	u8 lcr1;	/* LED Control 1 Reg(Reg 0x1B) */
-	u8 lcr2;	/* LED Control 2 Reg(Reg 0x1C) */
-	u8 mi_res4[3];	/* Future use by MI working group(Reg 0x1D - 0x1F) */
-};
-
 /* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
 #define ET_1000BT_MSTR_SLV 0x4000