---

yaml
---
r: 9679
b: refs/heads/master
c: b954cbc
h: refs/heads/master
i:
  9677: 35fbdd5
  9675: d925124
  9671: 438aa9b
  9663: da7b33b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a448a28589a6640736b8af1f2f57616c10bb37d5
+refs/heads/master: b954cbcb1a121ad23892a006af5a9616d5265512

trunk/arch/arm/mm/Kconfig

@@ -370,21 +370,21 @@ config CPU_BIG_ENDIAN
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
 	bool "Disable D-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -399,7 +399,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020
+	depends on CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 

trunk/arch/sparc/Kconfig

@@ -25,62 +25,6 @@ source "init/Kconfig"
 
 menu "General machine setup"
 
-config VT
-	bool
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config VT_CONSOLE
-	bool
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	default y
-
 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
 	depends on BROKEN

trunk/arch/sparc64/kernel/entry.S

@@ -97,8 +97,8 @@ do_fpdis:
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_1:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0xc0, %g2
@@ -126,8 +126,8 @@ cplus_fptrap_insn_1:
 	fzero		%f34
 	ldxa		[%g3] ASI_DMMU, %g5
 	add		%g6, TI_FPREGS, %g1
-cplus_fptrap_insn_2:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0x40, %g2
@@ -153,8 +153,8 @@ cplus_fptrap_insn_2:
 3:	mov		SECONDARY_CONTEXT, %g3
 	add		%g6, TI_FPREGS, %g1
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_3:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	mov		0x40, %g2
@@ -319,8 +319,8 @@ do_fptrap_after_fsr:
 	stx		%g3, [%g6 + TI_GSR]
 	mov		SECONDARY_CONTEXT, %g3
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_4:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS, %g2
@@ -341,33 +341,6 @@ cplus_fptrap_insn_4:
 	ba,pt		%xcc, etrap
 	 wr		%g0, 0, %fprs
 
-cplus_fptrap_1:
-	sethi		%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-	.globl		cheetah_plus_patch_fpdis
-cheetah_plus_patch_fpdis:
-	/* We configure the dTLB512_0 for 4MB pages and the
-	 * dTLB512_1 for 8K pages when in context zero.
-	 */
-	sethi			%hi(cplus_fptrap_1), %o0
-	lduw			[%o0 + %lo(cplus_fptrap_1)], %o1
-
-	set			cplus_fptrap_insn_1, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_2, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_3, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_4, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
-
 	/* The registers for cross calls will be:
 	 *
 	 * DATA 0: [low 32-bits]  Address of function to call, jmp to this

trunk/arch/sparc64/kernel/etrap.S

@@ -68,12 +68,8 @@ etrap_irq:
 
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_1:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_2:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 		wr	%g0, ASI_AIUS, %asi
@@ -215,12 +211,8 @@ scetrap:	rdpr	%pil, %g2
 		mov	PRIMARY_CONTEXT, %l4
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_3:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_4:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 
@@ -264,38 +256,3 @@ cplus_etrap_insn_4:
 
 #undef TASK_REGOFF
 #undef ETRAP_PSTATE1
-
-cplus_einsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-cplus_einsn_2:
-		sethi			%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-		.globl			cheetah_plus_patch_etrap
-cheetah_plus_patch_etrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_einsn_1), %o0
-		sethi			%hi(cplus_etrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_einsn_1)], %o1
-		or			%o2, %lo(cplus_etrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_3), %o2
-		or			%o2, %lo(cplus_etrap_insn_3), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		sethi			%hi(cplus_einsn_2), %o0
-		sethi			%hi(cplus_etrap_insn_2), %o2
-		lduw			[%o0 + %lo(cplus_einsn_2)], %o1
-		or			%o2, %lo(cplus_etrap_insn_2), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_4), %o2
-		or			%o2, %lo(cplus_etrap_insn_4), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop

trunk/arch/sparc64/kernel/head.S

@@ -325,23 +325,7 @@ cheetah_tlb_fixup:
 1:	sethi	%hi(tlb_type), %g1
 	stw	%g2, [%g1 + %lo(tlb_type)]
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Patch context register writes to support nucleus page
-	 * size correctly.
-	 */
-	call	cheetah_plus_patch_etrap
-	 nop
-	call	cheetah_plus_patch_rtrap
-	 nop
-	call	cheetah_plus_patch_fpdis
-	 nop
-	call	cheetah_plus_patch_winfixup
-	 nop
-
-2:	/* Patch copy/page operations to cheetah optimized versions. */
+	/* Patch copy/page operations to cheetah optimized versions. */
 	call	cheetah_patch_copyops
 	 nop
 	call	cheetah_patch_copy_page
@@ -484,20 +468,13 @@ spitfire_vpte_base:
 	call	prom_set_trap_table
 	 sethi	%hi(sparc64_ttable_tl0), %o0
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
+	stxa	%g2, [%g1] ASI_DMMU
 	membar	#Sync
 
-2:
 	rdpr	%pstate, %o1
 	or	%o1, PSTATE_IE, %o1
 	wrpr	%o1, 0, %pstate

trunk/arch/sparc64/kernel/rtrap.S

@@ -256,9 +256,8 @@ rt_continue:	ldx			[%sp + PTREGS_OFF + PT_V9_G1], %g1
 		brnz,pn			%l3, kern_rtt
 		 mov			PRIMARY_CONTEXT, %l7
 		ldxa			[%l7 + %l7] ASI_DMMU, %l0
-cplus_rtrap_insn_1:
-		sethi			%hi(0), %l1
-		sllx			%l1, 32, %l1
+		sethi			%hi(sparc64_kern_pri_nuc_bits), %l1
+		ldx			[%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
 		or			%l0, %l1, %l0
 		stxa			%l0, [%l7] ASI_DMMU
 		flush			%g6
@@ -345,21 +344,3 @@ kern_fpucheck:	ldub			[%g6 + TI_FPDEPTH], %l5
 		wr			%g0, FPRS_DU, %fprs
 		ba,pt			%xcc, rt_continue
 		 stb			%l5, [%g6 + TI_FPDEPTH]
-
-cplus_rinsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %l1
-
-		.globl			cheetah_plus_patch_rtrap
-cheetah_plus_patch_rtrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_rinsn_1), %o0
-		sethi			%hi(cplus_rtrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_rinsn_1)], %o1
-		or			%o2, %lo(cplus_rtrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop

trunk/arch/sparc64/kernel/setup.c

@@ -187,17 +187,13 @@ int prom_callback(long *args)
 		}
 
 		if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) {
-			unsigned long kernel_pctx = 0;
-
-			if (tlb_type == cheetah_plus)
-				kernel_pctx |= (CTX_CHEETAH_PLUS_NUC |
-						CTX_CHEETAH_PLUS_CTX0);
+			extern unsigned long sparc64_kern_pri_context;
 
 			/* Spitfire Errata #32 workaround */
 			__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
 					     "flush	%%g6"
 					     : /* No outputs */
-					     : "r" (kernel_pctx),
+					     : "r" (sparc64_kern_pri_context),
 					       "r" (PRIMARY_CONTEXT),
 					       "i" (ASI_DMMU));
 

trunk/arch/sparc64/kernel/trampoline.S

@@ -336,20 +336,13 @@ do_unlock:
 	call		init_irqwork_curcpu
 	 nop
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
+	stxa	%g2, [%g1] ASI_DMMU
 	membar	#Sync
 
-2:
 	rdpr		%pstate, %o1
 	or		%o1, PSTATE_IE, %o1
 	wrpr		%o1, 0, %pstate