spi_s3c24xx: fix clock rate calculation

Currently the clock rate calculation may round as pleased, which means
that it is possible that we will round down and end up with a faster clock
rate than intended.

Change the calculation to use DIV_ROUND_UP() to ensure that we end up with
a clock rate either the same as or lower than the user requested one.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/spi/spi_s3c24xx.c

@@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
 	unsigned int bpw;
 	unsigned int hz;
 	unsigned int div;
+	unsigned long clk;
 
 	bpw = t ? t->bits_per_word : spi->bits_per_word;
 	hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
 		return -EINVAL;
 	}
 
-	div = clk_get_rate(hw->clk) / hz;
-
-	/* is clk = pclk / (2 * (pre+1)), or is it
-	 *    clk = (pclk * 2) / ( pre + 1) */
-
-	div /= 2;
-
-	if (div > 0)
-		div -= 1;
+	clk = clk_get_rate(hw->clk);
+	div = DIV_ROUND_UP(clk, hz * 2) - 1;
 
 	if (div > 255)
 		div = 255;
 
-	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+		div, hz, clk / (2 * (div + 1)));
+
+
 	writeb(div, hw->regs + S3C2410_SPPRE);
 
 	spin_lock(&hw->bitbang.lock);