---

yaml
---
r: 365150
b: refs/heads/master
c: 3ec6eb9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2e1be9f7b359d653331876968e68e849857222d3
+refs/heads/master: 3ec6eb9cc2dbfa5b626f813ab8077eb71da60af2

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250_core.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

trunk/Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -10,40 +10,10 @@ Optional properties:
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
-- regulators : Contain the regulator nodes. The regulators are bound using
-  their names as listed below with their registers and bits for enabling.
+- regulators : Contain the regulator nodes.  The MC13892 regulators are
+  bound using their names as listed below with their registers and bits
+  for enabling.
 
-MC13783 regulators:
-    sw1a      : regulator SW1A      (register 24, bit 0)
-    sw1b      : regulator SW1B      (register 25, bit 0)
-    sw2a      : regulator SW2A      (register 26, bit 0)
-    sw2b      : regulator SW2B      (register 27, bit 0)
-    sw3       : regulator SW3       (register 29, bit 20)
-    vaudio    : regulator VAUDIO    (register 32, bit 0)
-    viohi     : regulator VIOHI     (register 32, bit 3)
-    violo     : regulator VIOLO     (register 32, bit 6)
-    vdig      : regulator VDIG      (register 32, bit 9)
-    vgen      : regulator VGEN      (register 32, bit 12)
-    vrfdig    : regulator VRFDIG    (register 32, bit 15)
-    vrfref    : regulator VRFREF    (register 32, bit 18)
-    vrfcp     : regulator VRFCP     (register 32, bit 21)
-    vsim      : regulator VSIM      (register 33, bit 0)
-    vesim     : regulator VESIM     (register 33, bit 3)
-    vcam      : regulator VCAM      (register 33, bit 6)
-    vrfbg     : regulator VRFBG     (register 33, bit 9)
-    vvib      : regulator VVIB      (register 33, bit 11)
-    vrf1      : regulator VRF1      (register 33, bit 12)
-    vrf2      : regulator VRF2      (register 33, bit 15)
-    vmmc1     : regulator VMMC1     (register 33, bit 18)
-    vmmc2     : regulator VMMC2     (register 33, bit 21)
-    gpo1      : regulator GPO1      (register 34, bit 6)
-    gpo2      : regulator GPO2      (register 34, bit 8)
-    gpo3      : regulator GPO3      (register 34, bit 10)
-    gpo4      : regulator GPO4      (register 34, bit 12)
-    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
-    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
-
-MC13892 regulators:
     vcoincell : regulator VCOINCELL (register 13, bit 23)
     sw1       : regulator SW1	    (register 24, bit 0)
     sw2       : regulator SW2	    (register 25, bit 0)

trunk/Documentation/kernel-parameters.txt

@@ -596,33 +596,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			is selected automatically. Check
 			Documentation/kdump/kdump.txt for further details.
 
+	crashkernel_low=size[KMG]
+			[KNL, x86] parts under 4G.
+
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for an example.
 
-	crashkernel=size[KMG],high
-			[KNL, x86_64] range could be above 4G. Allow kernel
-			to allocate physical memory region from top, so could
-			be above 4G if system have more than 4G ram installed.
-			Otherwise memory region will be allocated below 4G, if
-			available.
-			It will be ignored if crashkernel=X is specified.
-	crashkernel=size[KMG],low
-			[KNL, x86_64] range under 4G. When crashkernel=X,high
-			is passed, kernel could allocate physical memory region
-			above 4G, that cause second kernel crash on system
-			that require some amount of low memory, e.g. swiotlb
-			requires at least 64M+32K low memory.  Kernel would
-			try to allocate 72M below 4G automatically.
-			This one let user to specify own low range under 4G
-			for second kernel instead.
-			0: to disable low allocation.
-			It will be ignored when crashkernel=X,high is not used
-			or memory reserved is below 4G.
-
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -805,12 +788,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
-	efi_no_storage_paranoia [EFI; X86]
-			Using this parameter you can use more than 50% of
-			your efi variable storage. Use this parameter only if
-			you are really sure that your UEFI does sane gc and
-			fulfills the spec otherwise your board may brick.
-
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 

trunk/Documentation/scsi/LICENSE.qla2xxx

@@ -1,4 +1,4 @@
-Copyright (c) 2003-2013 QLogic Corporation
+Copyright (c) 2003-2012 QLogic Corporation
 QLogic Linux FC-FCoE Driver
 
 This program includes a device driver for Linux 3.x.

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,8 +890,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Reset HD-audio controller in power-saving mode
-		(default = on)
+    power_save_controller - Support runtime D3 of HD-audio controller
+		(-1 = on for supported chip (default), false = off,
+		 true = force to on even for unsupported hardware)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents

trunk/MAINTAINERS

@@ -4941,12 +4941,6 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
-LPC32XX MACHINE SUPPORT
-M:	Roland Stigge <stigge@antcom.de>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-lpc32xx/
-
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
 M:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
@@ -5071,8 +5065,9 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
 
 MARVELL LIBERTAS WIRELESS DRIVER
+M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
-S:	Orphan
+S:	Maintained
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
@@ -5574,7 +5569,6 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org
@@ -6631,7 +6625,7 @@ S:	Supported
 F:	fs/reiserfs/
 
 REGISTER MAP ABSTRACTION
-M:	Mark Brown <broonie@kernel.org>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
 S:	Supported
 F:	drivers/base/regmap/
@@ -6957,6 +6951,7 @@ F:	drivers/scsi/st*
 
 SCTP PROTOCOL
 M:	Vlad Yasevich <vyasevich@gmail.com>
+M:	Sridhar Samudrala <sri@us.ibm.com>
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
@@ -7379,7 +7374,7 @@ F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lgirdwood@gmail.com>
-M:	Mark Brown <broonie@kernel.org>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
@@ -7468,7 +7463,7 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
-M:	Mark Brown <broonie@kernel.org>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 T:	git git://git.secretlab.ca/git/linux-2.6.git
@@ -8712,8 +8707,8 @@ F:	drivers/scsi/vmw_pvscsi.c
 F:	drivers/scsi/vmw_pvscsi.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-M:	Liam Girdwood <lgirdwood@gmail.com>
-M:	Mark Brown <broonie@kernel.org>
+M:	Liam Girdwood <lrg@ti.com>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/regulator.git

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc5
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
@@ -513,8 +513,7 @@ ifeq ($(KBUILD_EXTMOD),)
 # Carefully list dependencies so we do not try to build scripts twice
 # in parallel
 PHONY += scripts
-scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
-	 asm-generic
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
 	$(Q)$(MAKE) $(build)=$(@)
 
 # Objects we will link into vmlinux / subdirs we need to visit

trunk/arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

trunk/arch/alpha/include/asm/floppy.h

@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    0, "floppy", NULL)
+					    IRQF_DISABLED, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

trunk/arch/alpha/kernel/irq.c

@@ -117,6 +117,13 @@ handle_irq(int irq)
 		return;
 	}
 
+	/*
+	 * From here we must proceed with IPL_MAX. Note that we do not
+	 * explicitly enable interrupts afterwards - some MILO PALcode
+	 * (namely LX164 one) seems to have severe problems with RTI
+	 * at IPL 0.
+	 */
+	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

trunk/arch/alpha/kernel/irq_alpha.c

@@ -45,14 +45,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
-
-	/*
-	 * Disable interrupts during IRQ handling.
-	 * Note that there is no matching local_irq_enable() due to
-	 * severe problems with RTI at IPL0 and some MILO PALcode
-	 * (namely LX164).
-	 */
-	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -70,6 +62,7 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
+		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -229,6 +222,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

trunk/arch/alpha/kernel/sys_nautilus.c

@@ -188,10 +188,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
-static struct resource irongate_io = {
-	.name	= "Irongate PCI IO",
-	.flags	= IORESOURCE_IO,
-};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -213,7 +209,6 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
-	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

trunk/arch/alpha/kernel/sys_titan.c

@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, 0,
+	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, 0,
+	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, 0,
+	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, 0,
+	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, 0,
+	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, 0,
+	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, 0,
+	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
 		    "Temperature Warning", NULL);
 
 	/*

trunk/arch/arc/include/asm/irqflags.h

@@ -39,7 +39,7 @@ static inline long arch_local_irq_save(void)
 	"	flag.nz %0		\n"
 	: "=r"(temp), "=r"(flags)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
-	: "memory", "cc");
+	: "cc");
 
 	return flags;
 }
@@ -53,8 +53,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
 	__asm__ __volatile__(
 	"	flag %0			\n"
 	:
-	: "r"(flags)
-	: "memory");
+	: "r"(flags));
 }
 
 /*
@@ -74,8 +73,7 @@ static inline void arch_local_irq_disable(void)
 	"	and %0, %0, %1		\n"
 	"	flag %0			\n"
 	: "=&r"(temp)
-	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
-	: "memory");
+	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)));
 }
 
 /*
@@ -87,9 +85,7 @@ static inline long arch_local_save_flags(void)
 
 	__asm__ __volatile__(
 	"	lr  %0, [status32]	\n"
-	: "=&r"(temp)
-	:
-	: "memory");
+	: "=&r"(temp));
 
 	return temp;
 }