---

yaml
---
r: 256614
b: refs/heads/master
c: a14bc2b
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6d9e5130b96daa1656966f7271e8a0928b3906c4
+refs/heads/master: a14bc2bb7075e59be635a2470dc0a32c5a0e8e21

trunk/drivers/net/igb/e1000_defines.h

@@ -512,6 +512,16 @@
 #define E1000_GCR_CMPL_TMOUT_RESEND     0x00010000
 #define E1000_GCR_CAP_VER2              0x00040000
 
+/* mPHY Address Control and Data Registers */
+#define E1000_MPHY_ADDR_CTL          0x0024 /* mPHY Address Control Register */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
+#define E1000_MPHY_DATA                 0x0E10 /* mPHY Data Register */
+
+/* mPHY PCS CLK Register */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET  0x0004 /* mPHY PCS CLK AFE CSR Offset */
+/* mPHY Near End Digital Loopback Override Bit */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
+
 /* PHY Control Register */
 #define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
 #define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */

trunk/drivers/net/igb/igb_ethtool.c

@@ -1461,6 +1461,22 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter)
 
 	/* use CTRL_EXT to identify link type as SGMII can appear as copper */
 	if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
+		if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+		(hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+
+			/* Enable DH89xxCC MPHY for near end loopback */
+			reg = rd32(E1000_MPHY_ADDR_CTL);
+			reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+			E1000_MPHY_PCS_CLK_REG_OFFSET;
+			wr32(E1000_MPHY_ADDR_CTL, reg);
+
+			reg = rd32(E1000_MPHY_DATA);
+			reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+			wr32(E1000_MPHY_DATA, reg);
+		}
+
 		reg = rd32(E1000_RCTL);
 		reg |= E1000_RCTL_LBM_TCVR;
 		wr32(E1000_RCTL, reg);
@@ -1502,6 +1518,23 @@ static void igb_loopback_cleanup(struct igb_adapter *adapter)
 	u32 rctl;
 	u16 phy_reg;
 
+	if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+	(hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+		u32 reg;
+
+		/* Disable near end loopback on DH89xxCC */
+		reg = rd32(E1000_MPHY_ADDR_CTL);
+		reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+		E1000_MPHY_PCS_CLK_REG_OFFSET;
+		wr32(E1000_MPHY_ADDR_CTL, reg);
+
+		reg = rd32(E1000_MPHY_DATA);
+		reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+		wr32(E1000_MPHY_DATA, reg);
+	}
+
 	rctl = rd32(E1000_RCTL);
 	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
 	wr32(E1000_RCTL, rctl);