---

yaml
---
r: 342205
b: refs/heads/master
c: bac2f66
h: refs/heads/master
i:
  342203: a79b136
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 632506a21a3b5f0596e89d55cda6b482bec331a3
+refs/heads/master: bac2f668864eca45b702ee394bef4c5f3a86658c

trunk/Documentation/devicetree/bindings/arm/omap/counter.txt

@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};

trunk/Documentation/devicetree/bindings/arm/omap/timer.txt

@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};

trunk/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt

@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};

trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor

trunk/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt

@@ -0,0 +1,28 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible              : "rohm,bu21013_tp"
+ - reg                     :  I2C device address
+
+Optional properties:
+ - touch-gpio              : GPIO pin registering a touch event
+ - <supply_name>-supply    : Phandle to a regulator supply
+ - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x             : Flip touch coordinates on the X axis
+ - rohm,flip-y             : Flip touch coordinates on the Y axis
+
+Example:
+
+	i2c@80110000 {
+		bu21013_tp@0x5c {
+			compatible = "rohm,bu21013_tp";
+			reg = <0x5c>;
+			touch-gpio = <&gpio2 20 0x4>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+			rohm,touch-max-x = <384>;
+			rohm,touch-max-y = <704>;
+			rohm,flip-y;
+		};
+	};

trunk/Documentation/devicetree/bindings/usb/am33xx-usb.txt

@@ -1,5 +1,7 @@
 AM33XX MUSB GLUE
  - compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+Example:
+
+usb@47400000  {
+	compatible = "ti,musb-am33xx";
+	reg = <0x47400000 0x1000	/* usbss */
+	       0x47401000 0x800		/* musb instance 0 */
+	       0x47401800 0x800>;	/* musb instance 1 */
+	interrupts = <17		/* usbss */
+		      18		/* musb instance 0 */
+		      19>;		/* musb instance 1 */
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	port0-mode = <3>;
+	port1-mode = <3>;
+	power = <250>;
+	ti,hwmods = "usb_otg_hs";
+};

trunk/arch/arm/Kconfig

@@ -924,7 +924,6 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
-	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 

trunk/arch/arm/boot/dts/Makefile

@@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb

trunk/arch/arm/boot/dts/am335x-bone.dts

@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"

trunk/arch/arm/boot/dts/am335x-evm.dts

@@ -13,11 +13,39 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+		matrix_keypad_s0: matrix_keypad_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+			>;
+		};
+
+		volume_keys_s0: volume_keys_s0 {
+			pinctrl-single,pins = <
+				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -31,6 +59,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +111,53 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
+			     &gpio2 26 0	/* Bank1, pin26 */
+			     &gpio2 27 0>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
+			     &gpio2 22 0>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio1 2 1>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio1 3 1>;
+			gpio-key,wakeup;
+		};
+	};
 };
 
 /include/ "tps65910.dtsi"