Merge branch 'topic/asoc' into for-linus

MAINTAINERS

@@ -530,6 +530,7 @@ S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
 ANALOG DEVICES INC ASOC CODEC DRIVERS
+M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	device-drivers-devel@blackfin.uclinux.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://wiki.analog.com/
@@ -7199,6 +7200,7 @@ T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
+F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/leds/leds-wm83*.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -900,7 +900,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 };
 
 static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.id			= TPA6130A2,
 	.power_gpio		= 98,
 };
 

arch/arm/mach-omap2/devices.c

@@ -330,6 +330,38 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct omap_device_pm_latency omap_mcpdm_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void omap_init_mcpdm(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup("mcpdm");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+		return;
+	}
+
+	od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
+				omap_mcpdm_latency,
+				ARRAY_SIZE(omap_mcpdm_latency), 0);
+	if (IS_ERR(od))
+		printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <plat/mcspi.h>
@@ -683,6 +715,7 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_audio();
+	omap_init_mcpdm();
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -5430,7 +5430,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_mcbsp4_hwmod,
 
 	/* mcpdm class */
-/*	&omap44xx_mcpdm_hwmod, */
+	&omap44xx_mcpdm_hwmod,
 
 	/* mcspi class */
 	&omap44xx_mcspi1_hwmod,

arch/arm/plat-omap/devices.c

@@ -74,41 +74,6 @@ void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static struct resource mcpdm_resources[] = {
-	{
-		.name		= "mcpdm_mem",
-		.start		= OMAP44XX_MCPDM_BASE,
-		.end		= OMAP44XX_MCPDM_BASE + SZ_4K,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.name		= "mcpdm_irq",
-		.start		= OMAP44XX_IRQ_MCPDM,
-		.end		= OMAP44XX_IRQ_MCPDM,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_mcpdm_device = {
-	.name		= "omap-mcpdm",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mcpdm_resources),
-	.resource	= mcpdm_resources,
-};
-
-static void omap_init_mcpdm(void)
-{
-	(void) platform_device_register(&omap_mcpdm_device);
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
@@ -291,7 +256,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_rng();
-	omap_init_mcpdm();
 	omap_init_uwire();
 	return 0;
 }

drivers/input/misc/twl6040-vibra.c

@@ -74,12 +74,12 @@ static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
 	if (status & TWL6040_VIBLOCDET) {
 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
-				   TWL6040_VIBENAL);
+				   TWL6040_VIBENA);
 	}
 	if (status & TWL6040_VIBROCDET) {
 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
-				   TWL6040_VIBENAR);
+				   TWL6040_VIBENA);
 	}
 
 	return IRQ_HANDLED;
@@ -104,16 +104,16 @@ static void twl6040_vibra_enable(struct vibra_info *info)
 		 * overcurrent detection
 		 */
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
-				  TWL6040_VIBENAL | TWL6040_VIBCTRLL);
+				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
-				  TWL6040_VIBENAR | TWL6040_VIBCTRLR);
+				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		usleep_range(3000, 3500);
 	}
 
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
-			  TWL6040_VIBENAL);
+			  TWL6040_VIBENA);
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
-			  TWL6040_VIBENAR);
+			  TWL6040_VIBENA);
 
 	info->enabled = true;
 }
@@ -201,6 +201,13 @@ static int vibra_play(struct input_dev *input, void *data,
 	struct vibra_info *info = input_get_drvdata(input);
 	int ret;
 
+	/* Do not allow effect, while the routing is set to use audio */
+	ret = twl6040_get_vibralr_status(info->twl6040);
+	if (ret & TWL6040_VIBSEL) {
+		dev_info(&input->dev, "Vibra is configured for audio\n");
+		return -EBUSY;
+	}
+
 	info->weak_speed = effect->u.rumble.weak_magnitude;
 	info->strong_speed = effect->u.rumble.strong_magnitude;
 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;

drivers/mfd/twl6040-core.c

@@ -34,16 +34,24 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/twl6040.h>
 
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
+
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 {
 	int ret;
 	u8 val = 0;
 
 	mutex_lock(&twl6040->io_mutex);
-	ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
-	if (ret < 0) {
-		mutex_unlock(&twl6040->io_mutex);
-		return ret;
+	/* Vibra control registers from cache */
+	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+		     reg == TWL6040_REG_VIBCTLR)) {
+		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+	} else {
+		ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+		if (ret < 0) {
+			mutex_unlock(&twl6040->io_mutex);
+			return ret;
+		}
 	}
 	mutex_unlock(&twl6040->io_mutex);
 
@@ -57,6 +65,9 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
 
 	mutex_lock(&twl6040->io_mutex);
 	ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+	/* Cache the vibra control registers */
+	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
 	mutex_unlock(&twl6040->io_mutex);
 
 	return ret;
@@ -433,6 +444,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 }
 EXPORT_SYMBOL(twl6040_get_sysclk);
 
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+	u8 status;
+
+	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+	return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
 static struct resource twl6040_vibra_rsrc[] = {
 	{
 		.flags = IORESOURCE_IRQ,

drivers/mfd/wm8994-core.c

@@ -243,6 +243,18 @@ static struct mfd_cell wm8994_devs[] = {
  * and should be handled via the standard regulator API supply
  * management.
  */
+static const char *wm1811_main_supplies[] = {
+	"DBVDD1",
+	"DBVDD2",
+	"DBVDD3",
+	"DCVDD",
+	"AVDD1",
+	"AVDD2",
+	"CPVDD",
+	"SPKVDD1",
+	"SPKVDD2",
+};
+
 static const char *wm8994_main_supplies[] = {
 	"DBVDD",
 	"DCVDD",
@@ -401,6 +413,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
+		break;
 	case WM8994:
 		wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
 		break;
@@ -421,6 +436,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	switch (wm8994->type) {
+	case WM1811:
+		for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
+			wm8994->supplies[i].supply = wm1811_main_supplies[i];
+		break;
 	case WM8994:
 		for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
 			wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -454,6 +473,13 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		goto err_enable;
 	}
 	switch (ret) {
+	case 0x1811:
+		devname = "WM1811";
+		if (wm8994->type != WM1811)
+			dev_warn(wm8994->dev, "Device registered as type %d\n",
+				 wm8994->type);
+		wm8994->type = WM1811;
+		break;
 	case 0x8994:
 		devname = "WM8994";
 		if (wm8994->type != WM8994)
@@ -651,6 +677,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id wm8994_i2c_id[] = {
+	{ "wm1811", WM1811 },
 	{ "wm8994", WM8994 },
 	{ "wm8958", WM8958 },
 	{ }

drivers/regulator/core.c

@@ -1599,13 +1599,18 @@ static void regulator_disable_work(struct work_struct *work)
 int regulator_disable_deferred(struct regulator *regulator, int ms)
 {
 	struct regulator_dev *rdev = regulator->rdev;
+	int ret;
 
 	mutex_lock(&rdev->mutex);
 	rdev->deferred_disables++;
 	mutex_unlock(&rdev->mutex);
 
-	return schedule_delayed_work(&rdev->disable_work,
-				     msecs_to_jiffies(ms));
+	ret = schedule_delayed_work(&rdev->disable_work,
+				    msecs_to_jiffies(ms));
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
 }
 EXPORT_SYMBOL_GPL(regulator_disable_deferred);
 

drivers/regulator/wm8994-regulator.c

@@ -140,6 +140,14 @@ static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
 		return (selector * 100000) + 900000;
 	case WM8958:
 		return (selector * 100000) + 1000000;
+	case WM1811:
+		switch (selector) {
+		case 0:
+			return -EINVAL;
+		default:
+			return (selector * 100000) + 950000;
+		}
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -170,6 +178,11 @@ static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev,
 	case WM8958:
 		selector = (min_uV - 1000000) / 100000;
 		break;
+	case WM1811:
+		selector = (min_uV - 950000) / 100000;
+		if (selector == 0)
+			selector = 1;
+		break;
 	default:
 		return -EINVAL;
 	}