---

yaml
---
r: 340069
b: refs/heads/master
c: f86804a
h: refs/heads/master
i:
  340067: cb097fb
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a6380c13c112af5122b8284c8cf1ec09aacae81d
+refs/heads/master: f86804af89686562fdeeabbdc0dfc6db9397f202

trunk/Documentation/00-INDEX

@@ -210,6 +210,8 @@ local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
 	- documentation on the runtime locking correctness validator.
+lockup-watchdogs.txt
+	- info on soft and hard lockup detectors (aka nmi_watchdog).
 logo.gif
 	- full colour GIF image of Linux logo (penguin - Tux).
 logo.txt
@@ -240,8 +242,6 @@ netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
 	- directory with info on various aspects of networking with Linux.
-nmi_watchdog.txt
-	- info on NMI watchdog for SMP systems.
 nommu-mmap.txt
 	- documentation about no-mmu memory mapping support.
 numastat.txt

trunk/Documentation/arm/sunxi/README

@@ -0,0 +1,19 @@
+ARM Allwinner SoCs
+==================
+
+This document lists all the ARM Allwinner SoCs that are currently
+supported in mainline by the Linux kernel. This document will also
+provide links to documentation and or datasheet for these SoCs.
+
+SunXi family
+------------
+
+  Flavors:
+        Allwinner A10 (sun4i)
+                Datasheet       : http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
+
+        Allwinner A13 (sun5i)
+                Datasheet       : http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+
+  Core: Cortex A8
+  Linux kernel mach directory: arch/arm/mach-sunxi

trunk/Documentation/arm64/memory.txt

@@ -27,17 +27,17 @@ Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	0000007fffffffff	 512GB		user
 
-ffffff8000000000	ffffffbbfffcffff	~240GB		vmalloc
+ffffff8000000000	ffffffbbfffeffff	~240GB		vmalloc
 
-ffffffbbfffd0000	ffffffbcfffdffff	  64KB		[guard page]
+ffffffbbffff0000	ffffffbbffffffff	  64KB		[guard page]
 
-ffffffbbfffe0000	ffffffbcfffeffff	  64KB		PCI I/O space
+ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
-ffffffbbffff0000	ffffffbcffffffff	  64KB		[guard page]
+ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
 
-ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
+ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
-ffffffbe00000000	ffffffbffbffffff	  ~8GB		[guard, future vmmemap]
+ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 

trunk/Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -8,7 +8,7 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
   <chip> can be "at91rm9200" or "at91sam9x5"
 - reg: Should contain registers location and length
 - interrupts: Should contain all interrupts for the TC block

trunk/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

@@ -0,0 +1,9 @@
+Broadcom BCM11351 device tree bindings
+-------------------------------------------
+
+Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140,
+bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
+
+Required root node property:
+
+compatible = "bcm,bcm11351";

trunk/Documentation/devicetree/bindings/arm/calxeda.txt

@@ -1,8 +1,15 @@
-Calxeda Highbank Platforms Device Tree Bindings
+Calxeda Platforms Device Tree Bindings
 -----------------------------------------------
 
-Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
-properties.
+Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the
+following properties.
 
 Required root node properties:
     - compatible = "calxeda,highbank";
+
+
+Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following
+properties.
+
+Required root node properties:
+    - compatible = "calxeda,ecx-2000";

trunk/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

@@ -12,13 +12,13 @@ Optional properties:
 Examples:
 
 i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x83fc4000 0x4000>;
 	interrupts = <63>;
 };
 
 i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x70038000 0x4000>;
 	interrupts = <64>;
 	clock-frequency = <400000>;

trunk/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

trunk/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt

@@ -0,0 +1,104 @@
+Allwinner Sunxi Interrupt Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sunxi-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+
+0: ENMI
+1: UART0
+2: UART1
+3: UART2
+4: UART3
+5: IR0
+6: IR1
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+13: SPDIF
+14: AC97
+15: TS
+16: I2S
+17: UART4
+18: UART5
+19: UART6
+20: UART7
+21: KEYPAD
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+26: CAN
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: SDMC0
+33: SDMC1
+34: SDMC2
+35: SDMC3
+36: MEMSTICK
+37: NAND
+38: USB0
+39: USB1
+40: USB2
+41: SCR
+42: CSI0
+43: CSI1
+44: LCDCTRL0
+45: LCDCTRL1
+46: MP
+47: DEFEBE0
+48: DEFEBE1
+49: PMU
+50: SPI3
+51: TZASC
+52: PATA
+53: VE
+54: SS
+55: EMAC
+56: SATA
+57: GPS
+58: HDMI
+59: TVE
+60: ACE
+61: TVD
+62: PS2_0
+63: PS2_1
+64: USB3
+65: USB4
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "allwinner,sunxi-ic";
+	reg = <0x01c20400 0x400>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};

trunk/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -93,7 +93,7 @@ Valid values for pin and group names are:
 
     With some exceptions, these support nvidia,high-speed-mode,
     nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
-    nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+    nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
 
     drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
     drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,

trunk/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

@@ -83,7 +83,7 @@ Valid values for pin and group names are:
   drive groups:
 
     These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
     support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
 
     ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,

trunk/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt

@@ -0,0 +1,17 @@
+Allwinner A1X SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sunxi-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
+
+Example:
+
+timer {
+	compatible = "allwinner,sunxi-timer";
+	reg = <0x01c20c00 0x400>;
+	interrupts = <22>;
+	clocks = <&osc>;
+};

trunk/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt

@@ -0,0 +1,13 @@
+BCM2835 Watchdog timer
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-pm-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+watchdog {
+	compatible = "brcm,bcm2835-pm-wdt";
+	reg = <0x7e100000 0x28>;
+};

trunk/Documentation/firmware_class/README

@@ -18,32 +18,40 @@
  High level behavior (mixed):
  ============================
 
- kernel(driver): calls request_firmware(&fw_entry, $FIRMWARE, device)
-
- userspace:
+ 1), kernel(driver):
+	- calls request_firmware(&fw_entry, $FIRMWARE, device)
+	- kernel searchs the fimware image with name $FIRMWARE directly
+	in the below search path of root filesystem:
+		"/lib/firmware/updates/" UTS_RELEASE,
+		"/lib/firmware/updates",
+		"/lib/firmware/" UTS_RELEASE,
+		"/lib/firmware"
+	- If found, goto 7), else goto 2)
+
+ 2), userspace:
  	- /sys/class/firmware/xxx/{loading,data} appear.
 	- hotplug gets called with a firmware identifier in $FIRMWARE
 	  and the usual hotplug environment.
 		- hotplug: echo 1 > /sys/class/firmware/xxx/loading
 
- kernel: Discard any previous partial load.
+ 3), kernel: Discard any previous partial load.
 
- userspace:
+ 4), userspace:
 		- hotplug: cat appropriate_firmware_image > \
 					/sys/class/firmware/xxx/data
 
- kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
+ 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
 	 comes in.
 
- userspace:
+ 6), userspace:
 		- hotplug: echo 0 > /sys/class/firmware/xxx/loading
 
- kernel: request_firmware() returns and the driver has the firmware
+ 7), kernel: request_firmware() returns and the driver has the firmware
 	 image in fw_entry->{data,size}. If something went wrong
 	 request_firmware() returns non-zero and fw_entry is set to
 	 NULL.
 
- kernel(driver): Driver code calls release_firmware(fw_entry) releasing
+ 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing
 		 the firmware image and any related resource.
 
  High level behavior (driver code):

trunk/Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

trunk/Documentation/zh_CN/IRQ.txt

@@ -0,0 +1,39 @@
+Chinese translated version of Documentation/IRQ.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Eric W. Biederman <ebiederman@xmission.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/IRQ.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Eric W. Biederman <ebiederman@xmission.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+何为 IRQ?
+
+一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚，
+或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。
+
+一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个
+全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现，
+具体的细节是体系结构特定的。
+
+一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是
+该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况，
+枚举的是在两个 i8259 中断控制器中 16 个输入引脚。
+
+架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下，
+是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。