---

yaml
---
r: 254599
b: refs/heads/master
c: 3140d5b
h: refs/heads/master
i:
  254597: bfec604
  254595: 5cedea3
  254591: b32d156
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2d12a18b89f5e3c0cce1981cc257228bfbf9039f
+refs/heads/master: 3140d5b2664309253ba465a14c89fe4f59c0359b

trunk/CREDITS

@@ -518,7 +518,7 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
-N: David Brownell
+M: David Brownell
 D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
 D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
 D: device drivers.  His encouragement also helped many engineers get

trunk/Documentation/hwmon/f71882fg

@@ -22,10 +22,6 @@ Supported chips:
     Prefix: 'f71869'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
-  * Fintek F71869A
-    Prefix: 'f71869a'
-    Addresses scanned: none, address read from Super I/O config space
-    Datasheet: Not public
   * Fintek F71882FG and F71883FG
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space

trunk/Documentation/hwmon/k10temp

@@ -9,8 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
-* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 * AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
@@ -20,16 +20,12 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
-  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
-    http://support.amd.com/us/Processor_TechDocs/41131.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
-  Revision Guide for AMD Family 12h Processors:
-    http://support.amd.com/us/Processor_TechDocs/44739.pdf
   Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:

trunk/Documentation/power/runtime_pm.txt

@@ -501,29 +501,13 @@ helper functions described in Section 4.  In that case, pm_runtime_resume()
 should be used.  Of course, for this purpose the device's run-time PM has to be
 enabled earlier by calling pm_runtime_enable().
 
-If the device bus type's or driver's ->probe() callback runs
+If the device bus type's or driver's ->probe() or ->remove() callback runs
 pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
 they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the driver core before executing ->probe().  Still, it may be
-desirable to suspend the device as soon as ->probe() has finished, so the driver
-core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
-the device at that time.
-
-Moreover, the driver core prevents runtime PM callbacks from racing with the bus
-notifier callback in __device_release_driver(), which is necessary, because the
-notifier is used by some subsystems to carry out operations affecting the
-runtime PM functionality.  It does so by calling pm_runtime_get_sync() before
-driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications.  This
-resumes the device if it's in the suspended state and prevents it from
-being suspended again while those routines are being executed.
-
-To allow bus types and drivers to put devices into the suspended state by
-calling pm_runtime_suspend() from their ->remove() routines, the driver core
-executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
-notifications in __device_release_driver().  This requires bus types and
-drivers to make their ->remove() callbacks avoid races with runtime PM directly,
-but also it allows of more flexibility in the handling of devices during the
-removal of their drivers.
+incremented by the core before executing ->probe() and ->remove().  Still, it
+may be desirable to suspend the device as soon as ->probe() or ->remove() has
+finished, so the PM core uses pm_runtime_idle_sync() to invoke the
+subsystem-level idle callback for the device at that time.
 
 The user space can effectively disallow the driver of the device to power manage
 it at run time by changing the value of its /sys/devices/.../power/control

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc5
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

trunk/README

@@ -1,6 +1,6 @@
-	Linux kernel release 3.x <http://kernel.org/>
+	Linux kernel release 2.6.xx <http://kernel.org/>
 
-These are the release notes for Linux version 3.  Read them carefully,
+These are the release notes for Linux version 2.6.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong. 
 
@@ -62,10 +62,10 @@ INSTALLING the kernel source:
    directory where you have permissions (eg. your home directory) and
    unpack it:
 
-		gzip -cd linux-3.X.tar.gz | tar xvf -
+		gzip -cd linux-2.6.XX.tar.gz | tar xvf -
 
    or
-		bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
+		bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
 
 
    Replace "XX" with the version number of the latest kernel.
@@ -75,25 +75,25 @@ INSTALLING the kernel source:
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 3.x releases by patching.  Patches are
+ - You can also upgrade between 2.6.xx releases by patching.  Patches are
    distributed in the traditional gzip and the newer bzip2 format.  To
    install by patching, get all the newer patch files, enter the
-   top level directory of the kernel source (linux-3.x) and execute:
+   top level directory of the kernel source (linux-2.6.xx) and execute:
 
-		gzip -cd ../patch-3.x.gz | patch -p1
+		gzip -cd ../patch-2.6.xx.gz | patch -p1
 
    or
-		bzip2 -dc ../patch-3.x.bz2 | patch -p1
+		bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
 
    (repeat xx for all versions bigger than the version of your current
    source tree, _in_order_) and you should be ok.  You may want to remove
    the backup files (xxx~ or xxx.orig), and make sure that there are no
    failed patches (xxx# or xxx.rej). If there are, either you or me has
    made a mistake.
 
-   Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
+   Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 3.x kernel.  Please read
+   directly to the base 2.6.x kernel.  Please read
    Documentation/applying-patches.txt for more information.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -107,14 +107,14 @@ INSTALLING the kernel source:
    an alternative directory can be specified as the second argument.
 
  - If you are upgrading between releases using the stable series patches
-   (for example, patch-3.x.y), note that these "dot-releases" are
-   not incremental and must be applied to the 3.x base tree. For
-   example, if your base kernel is 3.0 and you want to apply the
-   3.0.3 patch, you do not and indeed must not first apply the
-   3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
-   version 3.0.2 and want to jump to 3.0.3, you must first
-   reverse the 3.0.2 patch (that is, patch -R) _before_ applying
-   the 3.0.3 patch.
+   (for example, patch-2.6.xx.y), note that these "dot-releases" are
+   not incremental and must be applied to the 2.6.xx base tree. For
+   example, if your base kernel is 2.6.12 and you want to apply the
+   2.6.12.3 patch, you do not and indeed must not first apply the
+   2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
+   version 2.6.12.2 and want to jump to 2.6.12.3, you must first
+   reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
+   the 2.6.12.3 patch.
    You can read more on this in Documentation/applying-patches.txt
 
  - Make sure you have no stale .o files and dependencies lying around:
@@ -126,7 +126,7 @@ INSTALLING the kernel source:
 
 SOFTWARE REQUIREMENTS
 
-   Compiling and running the 3.x kernels requires up-to-date
+   Compiling and running the 2.6.xx kernels requires up-to-date
    versions of various software packages.  Consult
    Documentation/Changes for the minimum version numbers required
    and how to get updates for these packages.  Beware that using
@@ -142,11 +142,11 @@ BUILD directory for the kernel:
    Using the option "make O=output/dir" allow you to specify an alternate
    place for the output files (including .config).
    Example:
-     kernel source code:	/usr/src/linux-3.N
+     kernel source code:	/usr/src/linux-2.6.N
      build directory:		/home/name/build/kernel
 
    To configure and build the kernel use:
-   cd /usr/src/linux-3.N
+   cd /usr/src/linux-2.6.N
    make O=/home/name/build/kernel menuconfig
    make O=/home/name/build/kernel
    sudo make O=/home/name/build/kernel modules_install install

trunk/arch/arm/mach-at91/at91cap9.c

@@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

trunk/arch/arm/mach-at91/at91cap9_devices.c

@@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(at91_uarts[portnr]->id);
+		at91cap9_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91rm9200.c

@@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

trunk/arch/arm/mach-at91/at91rm9200_devices.c

@@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
+		at91rm9200_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91sam9260_devices.c

@@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
+		at91sam9260_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91sam9261_devices.c

@@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
+		at91sam9261_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91sam9263_devices.c

@@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
+		at91sam9263_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91sam9g45.c

@@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),

trunk/arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
+		at91sam9g45_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/at91sam9rl.c

@@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),

trunk/arch/arm/mach-at91/at91sam9rl_devices.c

@@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
+		at91sam9rl_set_console_clock(portnr);
 	}
 }
 

trunk/arch/arm/mach-at91/board-cap9adk.c

@@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
+	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/board-sam9260ek.c

@@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/board-sam9261ek.c

@@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/board-sam9263ek.c

@@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/board-sam9g20ek.c

@@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

trunk/arch/arm/mach-at91/include/mach/system_rev.h

@@ -13,13 +13,13 @@
  * the 16-31 bit are reserved for at91 generic information
  *
  * bit 31:
- *	0 => nand 8 bit
- *	1 => nand 16 bit
+ *	0 => nand 16 bit
+ *	1 => nand 8 bit
  */
-#define BOARD_HAVE_NAND_16BIT	(1 << 31)
-static inline int board_have_nand_16bit(void)
+#define BOARD_HAVE_NAND_8BIT	(1 << 31)
+static int inline board_have_nand_8bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_16BIT;
+	return system_rev & BOARD_HAVE_NAND_8BIT;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */