---

yaml
---
r: 221969
b: refs/heads/master
c: 89346f9
h: refs/heads/master
i:
  221967: 18a96a4
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 307ae1d3d05e0379211277cc652c462d36873984
+refs/heads/master: 89346f950014f2c615ed96c630be2a9c8576743c

trunk/MAINTAINERS

@@ -5676,7 +5676,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/

trunk/arch/arm/mach-shmobile/Kconfig

@@ -116,6 +116,4 @@ endmenu
 config SH_CLK_CPG
 	bool
 
-source "drivers/sh/Kconfig"
-
 endif

trunk/arch/arm/mach-shmobile/board-ap4evb.c

@@ -565,50 +565,12 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
-
-static int fsi_set_rate(int is_porta, int rate)
-{
-	struct clk *fsib_clk;
-	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
-	int ret;
-
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
-	switch (rate) {
-	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
-		break;
-	default:
-		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
-	}
-
-	clk_put(fsib_clk);
-
-	return ret;
-}
-
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
 		       SH_FSI_OFMT(PCM) |
 		       SH_FSI_IFMT(PCM),
-
-	.portb_flags = SH_FSI_BRS_INV |
-		       SH_FSI_BRM_INV |
-		       SH_FSI_LRS_INV |
-		       SH_FSI_OFMT(SPDIF),
-	.set_rate = fsi_set_rate,
 };
 
 static struct resource fsi_resources[] = {
@@ -672,7 +634,6 @@ static struct platform_device lcdc1_device = {
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
 	.lcd_dev = &lcdc1_device.dev,
-	.flags = HDMI_SND_SRC_SPDIF,
 };
 
 static struct resource hdmi_resources[] = {
@@ -1031,7 +992,6 @@ static void __init ap4evb_map_io(void)
 
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
-#define USCCR1		0xE6058144
 static void __init ap4evb_init(void)
 {
 	u32 srcr4;
@@ -1102,7 +1062,7 @@ static void __init ap4evb_init(void)
 	/* setup USB phy */
 	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
 
-	/* enable FSI2 port A (ak4643) */
+	/* enable FSI2 */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
@@ -1119,10 +1079,6 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_PORT41, NULL);
 	gpio_direction_input(GPIO_PORT41);
 
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
 	/* set SPU2 clock to 119.6 MHz */
 	clk = clk_get(NULL, "spu_clk");
 	if (!IS_ERR(clk)) {

trunk/arch/arm/mach-shmobile/clock-sh7372.c

@@ -50,9 +50,6 @@
 #define SMSTPCR3	0xe615013c
 #define SMSTPCR4	0xe6150140
 
-#define FSIDIVA		0xFE1F8000
-#define FSIDIVB		0xFE1F8008
-
 /* Platforms must set frequency on their DV_CLKI pin */
 struct clk sh7372_dv_clki_clk = {
 };
@@ -291,7 +288,6 @@ struct clk sh7372_pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
-	.nr_freqs	= ARRAY_SIZE(pllc2_freq_table) - 1,
 	.parent_table	= pllc2_parent,
 	.parent_num	= ARRAY_SIZE(pllc2_parent),
 };
@@ -421,101 +417,6 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
 };
 
-/* FSI DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
-	unsigned long value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	if ((value & 0x3) != 0x3)
-		return 0;
-
-	value >>= 16;
-	if (value < 2)
-		return 0;
-
-	return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_div_range_round(clk, 2, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
-	unsigned long value;
-
-	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
-		return -ENOENT;
-	}
-
-	__raw_writel((value << 16) | 0x3, clk->mapping->base);
-
-	return 0;
-}
-
-static int fsidiv_set_rate(struct clk *clk,
-			   unsigned long rate, int algo_id)
-{
-	int idx;
-
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
-	idx = (clk->parent->rate / rate) & 0xffff;
-	if (idx < 2)
-		return -ENOENT;
-
-	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
-}
-
-static struct clk_ops fsidiv_clk_ops = {
-	.recalc		= fsidiv_recalc,
-	.round_rate	= fsidiv_round_rate,
-	.set_rate	= fsidiv_set_rate,
-	.enable		= fsidiv_enable,
-	.disable	= fsidiv_disable,
-};
-
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
-	.phys	= FSIDIVA,
-	.len	= 8,
-};
-
-struct clk sh7372_fsidiva_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &sh7372_fsidiva_clk_mapping,
-};
-
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
-	.phys	= FSIDIVB,
-	.len	= 8,
-};
-
-struct clk sh7372_fsidivb_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &sh7372_fsidivb_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&sh7372_fsidiva_clk,
-	&sh7372_fsidivb_clk,
-};
-
 enum { MSTP001,
        MSTP131, MSTP130,
        MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
@@ -684,9 +585,6 @@ void __init sh7372_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)

trunk/arch/arm/mach-shmobile/include/mach/gpio.h

@@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return __gpio_to_irq(gpio);
+	return -ENOSYS;
 }
 
 static inline int irq_to_gpio(unsigned int irq)
 {
-	return -ENOSYS;
+	return -EINVAL;
 }
 
 #endif /* CONFIG_GPIOLIB */

trunk/arch/arm/mach-shmobile/include/mach/sh7372.h

@@ -464,7 +464,5 @@ extern struct clk sh7372_dv_clki_div2_clk;
 extern struct clk sh7372_pllc2_clk;
 extern struct clk sh7372_fsiack_clk;
 extern struct clk sh7372_fsibck_clk;
-extern struct clk sh7372_fsidiva_clk;
-extern struct clk sh7372_fsidivb_clk;
 
 #endif /* __ASM_SH7372_H__ */

trunk/arch/arm/plat-omap/devices.c

@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }

trunk/arch/m68k/include/asm/irqflags.h

@@ -2,9 +2,7 @@
 #define _M68K_IRQFLAGS_H
 
 #include <linux/types.h>
-#ifdef CONFIG_MMU
 #include <linux/hardirq.h>
-#endif
 #include <linux/preempt.h>
 #include <asm/thread_info.h>
 #include <asm/entry.h>

trunk/arch/m68k/include/asm/machdep.h

@@ -40,6 +40,5 @@ extern unsigned long hw_timer_offset(void);
 extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
 
 extern void config_BSP(char *command, int len);
-extern void do_IRQ(int irq, struct pt_regs *fp);
 
 #endif /* _M68K_MACHDEP_H */

trunk/arch/powerpc/kernel/kvm.c

@@ -127,7 +127,7 @@ static void kvm_patch_ins_nop(u32 *inst)
 
 static void kvm_patch_ins_b(u32 *inst, int addr)
 {
-#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC_BOOK3S)
+#ifdef CONFIG_RELOCATABLE
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 

trunk/arch/powerpc/kvm/booke_interrupts.S

@@ -416,7 +416,7 @@ lightweight_exit:
 	lwz	r3, VCPU_PC(r4)
 	mtsrr0	r3
 	lwz	r3, VCPU_SHARED(r4)
-	lwz	r3, (VCPU_SHARED_MSR + 4)(r3)
+	lwz	r3, VCPU_SHARED_MSR(r3)
 	oris	r3, r3, KVMPPC_MSR_MASK@h
 	ori	r3, r3, KVMPPC_MSR_MASK@l
 	mtsrr1	r3

trunk/arch/powerpc/kvm/e500.c

@@ -138,8 +138,8 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 
 	free_page((unsigned long)vcpu->arch.shared);
-	kvm_vcpu_uninit(vcpu);
 	kvmppc_e500_tlb_uninit(vcpu_e500);
+	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 

trunk/arch/powerpc/kvm/powerpc.c

@@ -617,7 +617,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	switch (ioctl) {
 	case KVM_PPC_GET_PVINFO: {
 		struct kvm_ppc_pvinfo pvinfo;
-		memset(&pvinfo, 0, sizeof(pvinfo));
 		r = kvm_vm_ioctl_get_pvinfo(&pvinfo);
 		if (copy_to_user(argp, &pvinfo, sizeof(pvinfo))) {
 			r = -EFAULT;

trunk/arch/powerpc/kvm/timing.c

@@ -35,6 +35,7 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	int i;
 
 	/* pause guest execution to avoid concurrent updates */
+	local_irq_disable();
 	mutex_lock(&vcpu->mutex);
 
 	vcpu->arch.last_exit_type = 0xDEAD;
@@ -50,6 +51,7 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	vcpu->arch.timing_last_enter.tv64 = 0;
 
 	mutex_unlock(&vcpu->mutex);
+	local_irq_enable();
 }
 
 static void add_exit_timing(struct kvm_vcpu *vcpu, u64 duration, int type)

trunk/arch/sh/Kconfig

@@ -193,7 +193,6 @@ config CPU_SH2
 config CPU_SH2A
 	bool
 	select CPU_SH2
-	select UNCACHED_MAPPING
 
 config CPU_SH3
 	bool

trunk/arch/sh/Makefile

@@ -133,7 +133,10 @@ machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
 machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
 machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
 machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa

trunk/arch/sh/boards/Kconfig

@@ -81,6 +81,13 @@ config SH_7343_SOLUTION_ENGINE
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION

trunk/arch/sh/boards/Makefile

@@ -2,12 +2,10 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
-obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
 obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
-obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o