arm: at91: move platfarm_data to include/linux/platform_data/atmel.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
git-mirror · Nov 6, 2012 · bcd2360 · bcd2360
1 parent 2484575
commit bcd2360
Show file tree

Hide file tree

Showing 16 changed files with 80 additions and 76 deletions.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
@@ -31,42 +31,15 @@
 #ifndef __ASM_ARCH_BOARD_H
 #define __ASM_ARCH_BOARD_H
 
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
-#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
 #include <linux/platform_data/atmel.h>
 
  /* USB Device */
-struct at91_udc_data {
-	int	vbus_pin;		/* high == host powering us */
-	u8	vbus_active_low;	/* vbus polarity */
-	u8	vbus_polled;		/* Use polling, not interrupt */
-	int	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
 
  /* USB High Speed Device */
 extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
-struct at91_cf_data {
-	int	irq_pin;		/* I/O IRQ */
-	int	det_pin;		/* Card detect */
-	int	vcc_pin;		/* power switching */
-	int	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-	u8	flags;
-#define AT91_CF_TRUE_IDE	0x01
-#define AT91_IDE_SWAP_A0_A2	0x02
-};
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
@@ -86,16 +59,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
-#define AT91_MAX_USBH_PORTS	3
-struct at91_usbh_data {
-	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
-	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
-	u8		ports;				/* number of ports on root hub */
-	u8              overcurrent_supported;
-	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
-};
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
@@ -124,13 +87,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin
 
 extern struct platform_device *atmel_default_console_device;
 
-struct atmel_uart_data {
-	int			num;		/* port num */
-	short			use_dma_tx;	/* use transmit DMA? */
-	short			use_dma_rx;	/* use receive DMA? */
-	void __iomem		*regs;		/* virt. base address, if any */
-	struct serial_rs485	rs485;		/* rs485 settings */
-};
 extern void __init at91_add_device_serial(void);
 
 /*
@@ -173,24 +129,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data,
 		bool use_pck_as_mck);
 
  /* Touchscreen Controller */
-struct at91_tsadcc_data {
-	unsigned int    adc_clock;
-	u8		pendet_debounce;
-	u8		ts_sample_hold_time;
-};
 extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
 
 /* CAN */
-struct at91_can_data {
-	void (*transceiver_switch)(int on);
-};
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
 #endif
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -34,13 +34,6 @@ extern struct platform_device *atmel_default_console_device;
 #define	ATMEL_USART_CTS		0x02
 #define	ATMEL_USART_CLK		0x04
 
-struct atmel_uart_data {
-	int		num;		/* port num */
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-	struct serial_rs485	rs485;		/* rs485 settings */
-};
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
 

diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
@@ -27,9 +27,9 @@
 #include <linux/libata.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
+#include <linux/platform_data/atmel.h>
 
 #include <mach/at91sam9_smc.h>
-#include <mach/board.h>
 #include <asm/gpio.h>
 
 #define DRV_NAME		"pata_at91"

diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
 #include <mach/cpu.h>
 
 /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/types.h>
+#include <linux/platform_data/atmel.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdio.h>
@@ -40,7 +41,6 @@
 #include <asm/unaligned.h>
 
 #include <mach/cpu.h>
-#include <mach/board.h>
 
 #include "atmel-mci-regs.h"
 

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
@@ -33,12 +33,11 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/platform_data/atmel.h>
 
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
-#include <mach/board.h>
-
 #define AT91_MB_MASK(i)		((1 << (i)) - 1)
 
 /* Common registers */

diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
@@ -31,14 +31,14 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 #include <linux/phy.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/mach-types.h>
 
 #include <mach/at91rm9200_emac.h>
 #include <asm/gpio.h>
-#include <mach/board.h>
 
 #include "at91_ether.h"
 

diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
@@ -17,14 +17,14 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/atmel.h>
 
 #include <pcmcia/ss.h>
 
 #include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 

diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/ioctl.h>
 #include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
 
-#include <mach/board.h>
 #include <mach/at91_rtt.h>
 #include <mach/cpu.h>
 

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
@@ -19,9 +19,9 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/io.h>
-#include <mach/board.h>
 #include <asm/gpio.h>
 #include <mach/cpu.h>
 

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
@@ -39,12 +39,12 @@
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
 #include <linux/uaccess.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/io.h>
 #include <asm/ioctls.h>
 
 #include <asm/mach/serial_at91.h>
-#include <mach/board.h>
 
 #ifdef CONFIG_ARM
 #include <mach/cpu.h>

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
@@ -31,14 +31,14 @@
 #include <linux/usb/gadget.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/gpio.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261_matrix.h>
 #include <mach/at91_matrix.h>

diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
@@ -21,9 +21,9 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/atmel_usba_udc.h>
 #include <linux/delay.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/gpio.h>
-#include <mach/board.h>
 
 #include "atmel_usba_udc.h"
 

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
@@ -16,11 +16,11 @@
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
@@ -19,8 +19,8 @@
 #include <linux/backlight.h>
 #include <linux/gfp.h>
 #include <linux/module.h>
+#include <linux/platform_data/atmel.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 #include <asm/gpio.h>
 

diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
@@ -8,6 +8,49 @@
 #define __ATMEL_H__
 
 #include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
+#include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	int	vbus_pin;		/* high == host powering us */
+	u8	vbus_active_low;	/* vbus polarity */
+	u8	vbus_polled;		/* Use polling, not interrupt */
+	int	pullup_pin;		/* active == D+ pulled up */
+	u8	pullup_active_low;	/* true == pullup_pin is active low */
+};
+
+ /* Compact Flash */
+struct at91_cf_data {
+	int	irq_pin;		/* I/O IRQ */
+	int	det_pin;		/* Card detect */
+	int	vcc_pin;		/* power switching */
+	int	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
+};
+
+ /* USB Host */
+#define AT91_MAX_USBH_PORTS	3
+struct at91_usbh_data {
+	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
+	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8		ports;				/* number of ports on root hub */
+	u8              overcurrent_supported;
+	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -24,4 +67,28 @@ struct atmel_nand_data {
 	unsigned int	num_parts;
 };
 
+ /* Serial */
+struct atmel_uart_data {
+	int			num;		/* port num */
+	short			use_dma_tx;	/* use transmit DMA? */
+	short			use_dma_rx;	/* use receive DMA? */
+	void __iomem		*regs;		/* virt. base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
+};
+
+ /* Touchscreen Controller */
+struct at91_tsadcc_data {
+	unsigned int    adc_clock;
+	u8		pendet_debounce;
+	u8		ts_sample_hold_time;
+};
+
+/* CAN */
+struct at91_can_data {
+	void (*transceiver_switch)(int on);
+};
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
 #endif /* __ATMEL_H__ */