---

yaml
---
r: 143593
b: refs/heads/master
c: 7217fa9
h: refs/heads/master
i:
  143591: a837d7b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7f07df540e3c6048e826c9dd4c29c9c836086e86
+refs/heads/master: 7217fa9851c99ffe43cee9e3ba4b81a34ce7bac4

trunk/Documentation/kernel-parameters.txt

@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86-64,i386]
+	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86-32,X86-64]
+	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[IA32/X86_64] How many bytes of object code to print
+	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [i386,x86-64]
+	disable_timer_pin_1 [X86]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
+	elfcorehdr=	[IA64,PPC,SH,X86]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86-32,X86-64] I/O delay method
+	io_delay=	[X86] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
+	memmap=exactmap	[KNL,X86] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+	noefi		[X86] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86-32,X86-64]
+	noexec		[X86]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
+	no_timer_check	[X86,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
+		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			reported either.
 
 	unknown_nmi_panic
-			[X86-32,X86-64]
+			[X86]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86-32,SH,x86-64]
+	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86-32,X86-64]
+	vdso32=		[X86]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping

trunk/Documentation/networking/bonding.txt

@@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa.
 To add ARP targets:
 # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-	NOTE:  up to 10 target addresses may be specified.
+	NOTE:  up to 16 target addresses may be specified.
 
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target

trunk/MAINTAINERS

@@ -3972,19 +3972,12 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
-NETWORK DEVICE DRIVERS
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
-L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-S:	Maintained
-F:	drivers/net/
-
 NETWORKING [GENERAL]
-P:	Networking Team
-M:	netdev@vger.kernel.org
+P:	David S. Miller
+M:	davem@davemloft.net
 L:	netdev@vger.kernel.org
 W:	http://linux-net.osdl.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/

trunk/arch/mn10300/include/asm/bug.h

@@ -11,10 +11,12 @@
 #ifndef _ASM_BUG_H
 #define _ASM_BUG_H
 
+#ifdef CONFIG_BUG
+
 /*
  * Tell the user there is some problem.
  */
-#define _debug_bug_trap()					\
+#define BUG()							\
 do {								\
 	asm volatile(						\
 		"	syscall 15			\n"	\
@@ -25,11 +27,11 @@ do {								\
 		:						\
 		: "i"(__FILE__), "i"(__LINE__)			\
 		);						\
-} while (0)
-
-#define BUG() _debug_bug_trap()
+} while (1)
 
 #define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
 #include <asm-generic/bug.h>
 
 #endif /* _ASM_BUG_H */

trunk/arch/mn10300/include/asm/unistd.h

@@ -344,6 +344,8 @@
 #define __NR_dup3		331
 #define __NR_pipe2		332
 #define __NR_inotify_init1	333
+#define __NR_preadv		334
+#define __NR_pwritev		335
 
 #ifdef __KERNEL__
 

trunk/arch/mn10300/kernel/entry.S

@@ -723,6 +723,8 @@ ENTRY(sys_call_table)
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 335 */
 
 
 nr_syscalls=(.-sys_call_table)/4

trunk/arch/mn10300/kernel/setup.c

@@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p)
 	data_resource.start = virt_to_bus(&_etext);
 	data_resource.end = virt_to_bus(&_edata)-1;
 
-#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
-
 	start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
 	kstart_pfn = PFN_UP(__pa(&_text));
 	free_pfn = PFN_UP(__pa(&_end));

trunk/arch/s390/appldata/appldata_base.c

@@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(void *p) {
 		struct vtimer_list *timer;
 		u64    expires;
 	} *args = p;
-	mod_virt_timer(args->timer, args->expires);
+	mod_virt_timer_periodic(args->timer, args->expires);
 }
 
 #define APPLDATA_ADD_TIMER	0

trunk/arch/s390/include/asm/cpuid.h

@@ -0,0 +1,25 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */

trunk/arch/s390/include/asm/kvm_host.h

@@ -15,6 +15,7 @@
 #define ASM_KVM_HOST_H
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
+#include <asm/cpuid.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32

trunk/arch/s390/include/asm/lowcore.h

@@ -66,6 +66,7 @@
 #define __LC_USER_EXEC_ASCE		0x02ac
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
+#define __LC_MACHINE_FLAGS		0x02d8
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -110,6 +111,7 @@
 #define __LC_CPUID			0x0320
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
+#define __LC_MACHINE_FLAGS		0x0358
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -127,9 +129,9 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
 #include <linux/types.h>
-#include <asm/sigp.h>
 
 void restart_int_handler(void);
 void ext_int_handler(void);
@@ -277,7 +279,8 @@ struct _lowcore
 	__u32	ext_call_fast;			/* 0x02c4 */
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
-	__u8	pad_0x02d8[0x0300-0x02d8];	/* 0x02d8 */
+	__u32	machine_flags;			/* 0x02d8 */
+	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -381,7 +384,8 @@ struct _lowcore
 	__u64	int_clock;			/* 0x0340 */
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
-	__u8	pad_0x0358[0x0380-0x0358];	/* 0x0358 */
+	__u64	machine_flags;			/* 0x0358 */
+	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */

trunk/arch/s390/include/asm/processor.h

@@ -14,7 +14,10 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
 #include <asm/ptrace.h>
+#include <asm/setup.h>
 
 #ifdef __KERNEL__
 /*
@@ -23,20 +26,6 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-        unsigned int version :  8;
-        unsigned int ident   : 24;
-        unsigned int machine : 16;
-        unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
 static inline void get_cpu_id(cpuid_t *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));

trunk/arch/s390/include/asm/ptrace.h

@@ -313,8 +313,6 @@ typedef struct
 
 
 #ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
 
 /*
  * The pt_regs struct defines the way the registers are stored on