Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/…

…jkirsher/net-next-2.6

drivers/net/Kconfig

@@ -2109,6 +2109,7 @@ config E1000
 config E1000E
 	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
 	depends on PCI && (!SPARC32 || BROKEN)
+	select CRC32
 	---help---
 	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
 	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,

drivers/net/igb/e1000_defines.h

@@ -110,6 +110,7 @@
 /* Management Control */
 #define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
 #define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_EN_BMC2OS     0x10000000 /* OSBMC is Enabled or not */
 /* Enable Neighbor Discovery Filtering */
 #define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
 #define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */

drivers/net/igb/e1000_hw.h

@@ -248,6 +248,10 @@ struct e1000_hw_stats {
 	u64 scvpc;
 	u64 hrmpc;
 	u64 doosync;
+	u64 o2bgptc;
+	u64 o2bspc;
+	u64 b2ospc;
+	u64 b2ogprc;
 };
 
 struct e1000_phy_stats {

drivers/net/igb/e1000_regs.h

@@ -328,4 +328,11 @@
 
 /* DMA Coalescing registers */
 #define E1000_PCIEMISC          0x05BB8 /* PCIE misc config register */
+
+/* OS2BMC Registers */
+#define E1000_B2OSPC    0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC   0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC   0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC    0x0415C /* OS2BMC packets transmitted by host */
+
 #endif

drivers/net/igb/igb_ethtool.c

@@ -86,6 +86,10 @@ static const struct igb_stats igb_gstrings_stats[] = {
 	IGB_STAT("tx_smbus", stats.mgptc),
 	IGB_STAT("rx_smbus", stats.mgprc),
 	IGB_STAT("dropped_smbus", stats.mgpdc),
+	IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+	IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+	IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
+	IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
 };
 
 #define IGB_NETDEV_STAT(_net_stat) { \
@@ -603,7 +607,10 @@ static void igb_get_regs(struct net_device *netdev,
 	regs_buff[548] = rd32(E1000_TDFT);
 	regs_buff[549] = rd32(E1000_TDFHS);
 	regs_buff[550] = rd32(E1000_TDFPC);
-
+	regs_buff[551] = adapter->stats.o2bgptc;
+	regs_buff[552] = adapter->stats.b2ospc;
+	regs_buff[553] = adapter->stats.o2bspc;
+	regs_buff[554] = adapter->stats.b2ogprc;
 }
 
 static int igb_get_eeprom_len(struct net_device *netdev)

drivers/net/igb/igb_main.c

@@ -4560,6 +4560,15 @@ void igb_update_stats(struct igb_adapter *adapter,
 	adapter->stats.mgptc += rd32(E1000_MGTPTC);
 	adapter->stats.mgprc += rd32(E1000_MGTPRC);
 	adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+	/* OS2BMC Stats */
+	reg = rd32(E1000_MANC);
+	if (reg & E1000_MANC_EN_BMC2OS) {
+		adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+		adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+		adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+		adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+	}
 }
 
 static irqreturn_t igb_msix_other(int irq, void *data)

drivers/net/ixgbe/ixgbe.h

@@ -552,6 +552,8 @@ extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
                           struct sk_buff *skb);
 extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
                               struct scatterlist *sgl, unsigned int sgc);
+extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+				 struct scatterlist *sgl, unsigned int sgc);
 extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
 extern int ixgbe_fcoe_enable(struct net_device *netdev);
 extern int ixgbe_fcoe_disable(struct net_device *netdev);

drivers/net/ixgbe/ixgbe_82598.c

@@ -280,10 +280,22 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 {
 	enum ixgbe_media_type media_type;
 
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
+		media_type = ixgbe_media_type_copper;
+		goto out;
+	default:
+		break;
+	}
+
 	/* Media type for I82598 is based on device ID */
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82598:
 	case IXGBE_DEV_ID_82598_BX:
+		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
 		break;
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
@@ -306,7 +318,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 		media_type = ixgbe_media_type_unknown;
 		break;
 	}
-
+out:
 	return media_type;
 }
 
@@ -354,7 +366,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 
 	/* Negotiate the fc mode to use */
 	ret_val = ixgbe_fc_autoneg(hw);
-	if (ret_val)
+	if (ret_val == IXGBE_ERR_FLOW_CONTROL)
 		goto out;
 
 	/* Disable any previous flow control settings */
@@ -372,10 +384,10 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 * 2: Tx flow control is enabled (we can send pause frames but
 	 *     we do not support receiving pause frames).
 	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
-	 * other: Invalid.
 #ifdef CONFIG_DCB
 	 * 4: Priority Flow Control is enabled.
 #endif
+	 * other: Invalid.
 	 */
 	switch (hw->fc.current_mode) {
 	case ixgbe_fc_none:
@@ -432,9 +444,10 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 		reg = (rx_pba_size - hw->fc.low_water) << 6;
 		if (hw->fc.send_xon)
 			reg |= IXGBE_FCRTL_XONE;
+
 		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
 
-		reg = (rx_pba_size - hw->fc.high_water) << 10;
+		reg = (rx_pba_size - hw->fc.high_water) << 6;
 		reg |= IXGBE_FCRTH_FCEN;
 
 		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
@@ -632,7 +645,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
  *  @autoneg: true if auto-negotiation enabled
- *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Set the link speed in the AUTOC register and restarts link.
  **/
@@ -671,7 +684,8 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
 		 * ixgbe_hw This will write the AUTOC register based on the new
 		 * stored values
 		 */
-		status = ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+		status = ixgbe_start_mac_link_82598(hw,
+						    autoneg_wait_to_complete);
 	}
 
 	return status;
@@ -1090,17 +1104,21 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 
 	/* Copper PHY must be checked before AUTOC LMS to determine correct
 	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
-	if (hw->phy.type == ixgbe_phy_tn ||
-	    hw->phy.type == ixgbe_phy_cu_unknown) {
-		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
-				     &ext_ability);
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
+	case ixgbe_phy_cu_unknown:
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE,
+		MDIO_MMD_PMAPMD, &ext_ability);
 		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
 			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
 		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
 			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
 		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
 			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
 		goto out;
+	default:
+		break;
 	}
 
 	switch (autoc & IXGBE_AUTOC_LMS_MASK) {