Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux…

…-2.6.git

Documentation/aoe/aoe.txt

@@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
   It has many tips and hints!
 
+The aoetools are userland programs that are designed to work with this
+driver.  The aoetools are on sourceforge.
+
+  http://aoetools.sourceforge.net/
+
+The scripts in this Documentation/aoe directory are intended to
+document the use of the driver and are not necessary if you install
+the aoetools.
+
+
 CREATING DEVICE NODES
 
   Users of udev should find the block device nodes created
@@ -35,14 +45,15 @@ USING DEVICE NODES
 
   "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
   limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic from
-  untrusted networks should be ignored as a matter of security.
+  untrusted networks should be ignored as a matter of security.  See
+  also the aoe_iflist driver option described below.
 
   "echo > /dev/etherd/discover" tells the driver to find out what AoE
   devices are available.
 
   These character devices may disappear and be replaced by sysfs
-  counterparts, so distribution maintainers are encouraged to create
-  scripts that use these devices.
+  counterparts.  Using the commands in aoetools insulates users from
+  these implementation details.
 
   The block devices are named like this:
 
@@ -66,7 +77,8 @@ USING SYSFS
   through which we are communicating with the remote AoE device.
 
   There is a script in this directory that formats this information
-  in a convenient way.
+  in a convenient way.  Users with aoetools can use the aoe-stat
+  command.
 
   root@makki root# sh Documentation/aoe/status.sh 
      e10.0            eth3              up
@@ -89,3 +101,23 @@ USING SYSFS
       e4.7            eth1              up
       e4.8            eth1              up
       e4.9            eth1              up
+
+  Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
+  option discussed below) instead of /dev/etherd/interfaces to limit
+  AoE traffic to the network interfaces in the given
+  whitespace-separated list.  Unlike the old character device, the
+  sysfs entry can be read from as well as written to.
+
+  It's helpful to trigger discovery after setting the list of allowed
+  interfaces.  The aoetools package provides an aoe-discover script
+  for this purpose.  You can also directly use the
+  /dev/etherd/discover special file described above.
+
+DRIVER OPTIONS
+
+  There is a boot option for the built-in aoe driver and a
+  corresponding module parameter, aoe_iflist.  Without this option,
+  all network interfaces may be used for ATA over Ethernet.  Here is a
+  usage example for the module parameter.
+
+    modprobe aoe_iflist="eth1 eth3"

Documentation/aoe/status.sh

@@ -14,10 +14,6 @@ test ! -d "$sysd/block" && {
 	echo "$me Error: sysfs is not mounted" 1>&2
 	exit 1
 }
-test -z "`lsmod | grep '^aoe'`" && {
-	echo  "$me Error: aoe module is not loaded" 1>&2
-	exit 1
-}
 
 for d in `ls -d $sysd/block/etherd* 2>/dev/null | grep -v p` end; do
 	# maybe ls comes up empty, so we use "end"

Documentation/pci.txt

@@ -279,6 +279,7 @@ pci_for_each_dev_reverse()	Superseded by pci_find_device_reverse()
 pci_for_each_bus()		Superseded by pci_find_next_bus()
 pci_find_device()		Superseded by pci_get_device()
 pci_find_subsys()		Superseded by pci_get_subsys()
+pci_find_slot()			Superseded by pci_get_slot()
 pcibios_find_class()		Superseded by pci_get_class()
 pci_find_class()		Superseded by pci_get_class()
 pci_(read|write)_*_nodev()	Superseded by pci_bus_(read|write)_*()

Documentation/power/pci.txt

@@ -165,40 +165,9 @@ Description:
 These functions are intended for use by individual drivers, and are defined in 
 struct pci_driver:
 
-        int  (*save_state) (struct pci_dev *dev, u32 state);
-        int  (*suspend) (struct pci_dev *dev, u32 state);
+        int  (*suspend) (struct pci_dev *dev, pm_message_t state);
         int  (*resume) (struct pci_dev *dev);
-        int  (*enable_wake) (struct pci_dev *dev, u32 state, int enable);
-
-
-save_state
-----------
-
-Usage:
-
-if (dev->driver && dev->driver->save_state)
-	dev->driver->save_state(dev,state);
-
-The driver should use this callback to save device state. It should take into
-account the current state of the device and the requested state in order to
-avoid any unnecessary operations.
-
-For example, a video card that supports all 4 states (D0-D3), all controller
-context is preserved when entering D1, but the screen is placed into a low power
-state (blanked). 
-
-The driver can also interpret this function as a notification that it may be
-entering a sleep state in the near future. If it knows that the device cannot
-enter the requested state, either because of lack of support for it, or because
-the device is middle of some critical operation, then it should fail.
-
-This function should not be used to set any state in the device or the driver
-because the device may not actually enter the sleep state (e.g. another driver
-later causes causes a global state transition to fail).
-
-Note that in intermediate low power states, a device's I/O and memory spaces may
-be disabled and may not be available in subsequent transitions to lower power
-states.
+        int  (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable);
 
 
 suspend

arch/alpha/Kconfig

@@ -280,6 +280,10 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
+config ISA_DMA_API
+	bool
+	default y
+
 config PCI
 	bool
 	depends on !ALPHA_JENSEN

arch/arm/Kconfig

@@ -266,6 +266,10 @@ config ISA_DMA
 	depends on FOOTBRIDGE_HOST || ARCH_SHARK
 	default y
 
+config ISA_DMA_API
+	bool
+	default y
+
 config PCI
 	bool "PCI support" if ARCH_INTEGRATOR_AP
 	default y if ARCH_SHARK || FOOTBRIDGE_HOST || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_IXP2000

arch/arm/boot/compressed/head.S

@@ -18,48 +18,30 @@
  * Please select one of the following when turning on debugging.
  */
 #ifdef DEBUG
-#if defined(CONFIG_DEBUG_DC21285_PORT)
-		.macro	loadsp, rb
-		mov	\rb, #0x42000000
-		.endm
-		.macro	writeb, rb
-		str	\rb, [r3, #0x160]
-		.endm
-#elif defined(CONFIG_DEBUG_ICEDCC)
+
+#include <asm/arch/debug-macro.S>
+
+#if defined(CONFIG_DEBUG_ICEDCC)
 		.macro	loadsp, rb
 		.endm
-		.macro writeb, rb
-		mcr	p14, 0, \rb, c0, c1, 0
-		.endm
-#elif defined(CONFIG_FOOTBRIDGE)
-		.macro	loadsp,	rb
-		mov	\rb, #0x7c000000
+		.macro writeb, ch, rb
+		mcr	p14, 0, \ch, c0, c1, 0
 		.endm
-		.macro	writeb,	rb
-		strb	\rb, [r3, #0x3f8]
+#else
+		.macro	writeb,	ch, rb
+		senduart \ch, \rb
 		.endm
-#elif defined(CONFIG_ARCH_RPC)
+
+#if defined(CONFIG_FOOTBRIDGE) || \
+    defined(CONFIG_ARCH_RPC) || \
+    defined(CONFIG_ARCH_INTEGRATOR) || \
+    defined(CONFIG_ARCH_PXA) || \
+    defined(CONFIG_ARCH_IXP4XX) || \
+    defined(CONFIG_ARCH_IXP2000) || \
+    defined(CONFIG_ARCH_LH7A40X) || \
+    defined(CONFIG_ARCH_OMAP)
 		.macro	loadsp,	rb
-		mov	\rb, #0x03000000
-		orr	\rb, \rb, #0x00010000
-		.endm
-		.macro	writeb,	rb
-		strb	\rb, [r3, #0x3f8 << 2]
-		.endm
-#elif defined(CONFIG_ARCH_INTEGRATOR)
-		.macro	loadsp, rb
-		mov	\rb, #0x16000000
-		.endm
-		.macro	writeb, rb
-		strb	\rb, [r3, #0]
-		.endm
-#elif defined(CONFIG_ARCH_PXA) /* Xscale-type */
-		.macro 	loadsp, rb
-		mov	\rb, #0x40000000
-		orr	\rb, \rb, #0x00100000
-		.endm
-		.macro	writeb, rb
-		strb	\rb, [r3, #0]
+		addruart \rb
 		.endm
 #elif defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb
@@ -70,64 +52,21 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #  endif
 		.endm
-		.macro	writeb, rb
-		str	\rb, [r3, #0x14]	@ UTDR
-		.endm
-#elif defined(CONFIG_ARCH_IXP4XX)
-		.macro	loadsp, rb
-		mov	\rb, #0xc8000000
-		.endm
-		.macro	writeb, rb
-		str	\rb, [r3, #0]
-#elif defined(CONFIG_ARCH_IXP2000)
-		.macro	loadsp, rb
-		mov	\rb, #0xc0000000
-		orr	\rb, \rb, #0x00030000
-		.endm
-		.macro	writeb, rb
-		str	\rb, [r3, #0]
-		.endm
-#elif defined(CONFIG_ARCH_LH7A40X)
-		.macro	loadsp, rb
-		ldr	\rb, =0x80000700	@ UART2 UARTBASE
-		.endm
-		.macro	writeb, rb
-		strb	\rb, [r3, #0]
-		.endm
-#elif defined(CONFIG_ARCH_OMAP)
-		.macro  loadsp, rb
-		mov	\rb, #0xff000000	@ physical base address
-		add	\rb, \rb, #0x00fb0000
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		add	\rb, \rb, #0x00000800
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rb, \rb, #0x00009000
-#endif
-		.endm
-		.macro	writeb, rb
-		strb	\rb, [r3]
-		.endm
 #elif defined(CONFIG_ARCH_IOP331)
 		.macro loadsp, rb
                 mov   	\rb, #0xff000000
                 orr     \rb, \rb, #0x00ff0000
                 orr     \rb, \rb, #0x0000f700   @ location of the UART
 		.endm
-		.macro	writeb, rb
-		str	\rb, [r3, #0]
-		.endm
 #elif defined(CONFIG_ARCH_S3C2410)
-			.macro loadsp, rb
+		.macro loadsp, rb
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
 		.endm
-		.macro	writeb, rb
-		strb	\rb, [r3, #0x20]
-		.endm
 #else
 #error no serial architecture defined
 #endif
+#endif
 #endif
 
 		.macro	kputc,val
@@ -734,7 +673,7 @@ puts:		loadsp	r3
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
-2:		writeb	r2
+2:		writeb	r2, r3
 		mov	r1, #0x00020000
 3:		subs	r1, r1, #1
 		bne	3b

arch/arm/mach-imx/generic.c

@@ -26,6 +26,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <asm/arch/imxfb.h>
 #include <asm/hardware.h>
 
 #include <asm/mach/map.h>
@@ -228,6 +229,14 @@ static struct platform_device imx_uart2_device = {
 	.resource	= imx_uart2_resources,
 };
 
+static struct imxfb_mach_info imx_fb_info;
+
+void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
+{
+	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
+}
+EXPORT_SYMBOL(set_imx_fb_info);
+
 static struct resource imxfb_resources[] = {
 	[0] = {
 		.start	= 0x00205000,
@@ -241,9 +250,16 @@ static struct resource imxfb_resources[] = {
 	},
 };
 
+static u64 fb_dma_mask = ~(u64)0;
+
 static struct platform_device imxfb_device = {
 	.name		= "imx-fb",
 	.id		= 0,
+	.dev		= {
+ 		.platform_data	= &imx_fb_info,
+		.dma_mask	= &fb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
 	.num_resources	= ARRAY_SIZE(imxfb_resources),
 	.resource	= imxfb_resources,
 };

arch/arm/mach-integrator/core.c

@@ -216,7 +216,9 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	write_seqlock(&xtime_lock);
 
-	// ...clear the interrupt
+	/*
+	 * clear the interrupt
+	 */
 	timer1->TimerClear = 1;
 
 	timer_tick(regs);
@@ -264,7 +266,7 @@ void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
 	timer1->TimerValue   = timer_reload;
 	timer1->TimerControl = timer_ctrl;
 
-	/* 
+	/*
 	 * Make irqs happen for the system timer
 	 */
 	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);

arch/arm/mach-integrator/leds.c

@@ -37,7 +37,7 @@ static void integrator_leds_event(led_event_t ledevt)
 	unsigned long flags;
 	const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
 	unsigned int update_alpha_leds;
-	
+
 	// yup, change the LEDs
 	local_irq_save(flags);
 	update_alpha_leds = 0;

arch/arm/mach-ixp4xx/common-pci.c

@@ -501,15 +501,6 @@ pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 	return -EIO;
 }
 
-int
-pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-
 int
 pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
@@ -520,7 +511,6 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 }
 
 EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_dac_set_dma_mask);
 EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);

arch/arm/mm/Kconfig

@@ -413,6 +413,7 @@ config CPU_BPREDICT_DISABLE
 config HAS_TLS_REG
 	bool
 	depends on CPU_32v6 && !CPU_32v5 && !CPU_32v4 && !CPU_32v3
+	default y
 	help
 	  This selects support for the CP15 thread register.
 	  It is defined to be available on ARMv6 or later.  However