---

yaml
---
r: 234921
b: refs/heads/master
c: da6b737
h: refs/heads/master
i:
  234919: 9d0d4d3
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f1c2b357148ec27fcc6ce0992211209a0ea20d8f
+refs/heads/master: da6b737b9ab768dd06bb4b0395131d10e524cf83

trunk/Documentation/devicetree/booting-without-of.txt

@@ -13,6 +13,7 @@ Table of Contents
 
   I - Introduction
     1) Entry point for arch/powerpc
+    2) Entry point for arch/x86
 
   II - The DT block format
     1) Header
@@ -225,6 +226,25 @@ it with special cases.
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
+2) Entry point for arch/x86
+-------------------------------
+
+  There is one single 32bit entry point to the kernel at code32_start,
+  the decompressor (the real mode entry point goes to the same  32bit
+  entry point once it switched into protected mode). That entry point
+  supports one calling convention which is documented in
+  Documentation/x86/boot.txt
+  The physical pointer to the device-tree block (defined in chapter II)
+  is passed via setup_data which requires at least boot protocol 2.09.
+  The type filed is defined as
+
+  #define SETUP_DTB                      2
+
+  This device-tree is used as an extension to the "boot page". As such it
+  does not parse / consider data which is already covered by the boot
+  page. This includes memory size, reserved ranges, command line arguments
+  or initrd address. It simply holds information which can not be retrieved
+  otherwise like interrupt routing or a list of devices behind an I2C bus.
 
 II - The DT block format
 ========================

trunk/arch/x86/Kconfig

@@ -382,6 +382,8 @@ config X86_INTEL_CE
 	depends on X86_32
 	depends on X86_EXTENDED_PLATFORM
 	select X86_REBOOTFIXUPS
+	select OF
+	select OF_EARLY_FLATTREE
 	---help---
 	  Select for the Intel CE media processor (CE4100) SOC.
 	  This option compiles in support for the CE4100 SOC for settop

trunk/arch/x86/include/asm/bootparam.h

@@ -12,6 +12,7 @@
 /* setup data types */
 #define SETUP_NONE			0
 #define SETUP_E820_EXT			1
+#define SETUP_DTB			2
 
 /* extensible setup data list node */
 struct setup_data {

trunk/arch/x86/include/asm/irq.h

@@ -10,9 +10,6 @@
 #include <asm/apicdef.h>
 #include <asm/irq_vectors.h>
 
-/* Even though we don't support this, supply it to appease OF */
-static inline void irq_dispose_mapping(unsigned int virq) { }
-
 static inline int irq_canonicalize(int irq)
 {
 	return ((irq == 2) ? 9 : irq);

trunk/arch/x86/include/asm/prom.h

@@ -1 +1,47 @@
-/* dummy prom.h; here to make linux/of.h's #includes happy */
+/*
+ * Definitions for Device tree / OpenFirmware handling on X86
+ *
+ * based on arch/powerpc/include/asm/prom.h which is
+ *         Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_X86_PROM_H
+#define _ASM_X86_PROM_H
+#ifndef __ASSEMBLY__
+
+#include <linux/of.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_OF
+extern void add_dtb(u64 data);
+#else
+static inline void add_dtb(u64 data) { }
+#endif
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+#define pci_address_to_pio pci_address_to_pio
+unsigned long pci_address_to_pio(phys_addr_t addr);
+
+/**
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ *
+ * FIXME: We really should implement proper virq handling like power,
+ * but that's going to be major surgery.
+ */
+static inline void irq_dispose_mapping(unsigned int virq) { }
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+#endif /* __ASSEMBLY__ */
+#endif

trunk/arch/x86/kernel/Makefile

@@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE)			+= microcode.o
 obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
 
 obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
+obj-$(CONFIG_OF)			+= devicetree.o
 
 ###
 # 64 bit specific files

trunk/arch/x86/kernel/devicetree.c

@@ -0,0 +1,51 @@
+/*
+ * Architecture specific OF callbacks.
+ */
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+char __initdata cmd_line[COMMAND_LINE_SIZE];
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+				   const u32 *intspec, unsigned int intsize)
+{
+	return intspec[0];
+
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	/*
+	 * The ioport address can be directly used by inX / outX
+	 */
+	BUG_ON(address >= (1 << 16));
+	return (unsigned long)address;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
+{
+	BUG();
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	BUG();
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
+}
+
+void __init add_dtb(u64 data)
+{
+	initial_boot_params = phys_to_virt((u64) (u32) data +
+				offsetof(struct setup_data, data));
+}

trunk/arch/x86/kernel/irq.c

@@ -276,15 +276,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs)
 
 EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
 
-#ifdef CONFIG_OF
-unsigned int irq_create_of_mapping(struct device_node *controller,
-		const u32 *intspec, unsigned int intsize)
-{
-	return intspec[0];
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-#endif
-
 #ifdef CONFIG_HOTPLUG_CPU
 /* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
 void fixup_irqs(void)

trunk/arch/x86/kernel/setup.c

@@ -113,6 +113,7 @@
 #endif
 #include <asm/mce.h>
 #include <asm/alternative.h>
+#include <asm/prom.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -445,6 +446,9 @@ static void __init parse_setup_data(void)
 		case SETUP_E820_EXT:
 			parse_e820_ext(data);
 			break;
+		case SETUP_DTB:
+			add_dtb(pa_data);
+			break;
 		default:
 			break;
 		}