---

yaml
---
r: 103813
b: refs/heads/master
c: 335377b
h: refs/heads/master
i:
  103811: 35487c0
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 26151c32d3d001f64e75871588acd0aff3f216d7
+refs/heads/master: 335377b73dd0b0af1fbd283ceae6fcb87a747885

trunk/Documentation/video4linux/CARDLIST.cx23885

@@ -8,3 +8,4 @@
   7 -> Hauppauge WinTV-HVR1200                             [0070:71d1,0070:71d3]
   8 -> Hauppauge WinTV-HVR1700                             [0070:8101]
   9 -> Hauppauge WinTV-HVR1400                             [0070:8010]
+ 10 -> DViCO FusionHDTV7 Dual Express                      [18ac:d618]

trunk/drivers/media/video/cx23885/cx23885-cards.c

@@ -143,6 +143,10 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-HVR1400",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
+		.name		= "DViCO FusionHDTV7 Dual Express",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -210,6 +214,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8010,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
+	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd618,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -477,6 +485,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	}
 
 	switch (dev->board) {
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		/* break omitted intentionally */
 	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */

trunk/drivers/media/video/cx23885/cx23885-dvb.c

@@ -164,12 +164,28 @@ static struct s5h1409_config hauppauge_hvr1500q_config = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 };
 
+static struct s5h1409_config dvico_s5h1409_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 5380,
 	.tuner_callback   = cx23885_tuner_callback
 };
 
+static struct xc5000_config dvico_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+	.tuner_callback   = cx23885_tuner_callback
+};
+
 static struct tda829x_config tda829x_no_probe = {
 	.probe_tuner = TDA829X_DONT_PROBE,
 };
@@ -453,6 +469,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
 		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+		port->dvb.frontend = dvb_attach(s5h1409_attach,
+						&dvico_s5h1409_config,
+						&i2c_bus->i2c_adap);
+		if (port->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, port->dvb.frontend,
+				&i2c_bus->i2c_adap,
+				&dvico_xc5000_tunerconfig, i2c_bus);
+		break;
 	default:
 		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
 		       dev->name);

trunk/drivers/media/video/cx23885/cx23885.h

@@ -63,6 +63,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1200        7
 #define CX23885_BOARD_HAUPPAUGE_HVR1700        8
 #define CX23885_BOARD_HAUPPAUGE_HVR1400        9
+#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\