Merge branch 'mvebu/drivers' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/arm/arm-soc

Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.

.gitignore

@@ -24,6 +24,7 @@
 *.order
 *.elf
 *.bin
+*.tar
 *.gz
 *.bz2
 *.lzma

CREDITS

@@ -2049,6 +2049,10 @@ D: pirq addr, CS5535 alsa audio driver
 S: Gurgaon, India
 S: Kuala Lumpur, Malaysia
 
+N: Mohit Kumar
+D: ST Microelectronics SPEAr13xx PCI host bridge driver
+D: Synopsys Designware PCI host bridge driver
+
 N: Gabor Kuti
 M: seasons@falcon.sch.bme.hu
 M: seasons@makosteszta.sote.hu

Documentation/ABI/testing/sysfs-block-dm

@@ -23,3 +23,25 @@ Description:	Device-mapper device suspend state.
 		Contains the value 1 while the device is suspended.
 		Otherwise it contains 0. Read-only attribute.
 Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/rq_based_seq_io_merge_deadline
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	dm-devel@redhat.com
+Description:	Allow control over how long a request that is a
+		reasonable merge candidate can be queued on the request
+		queue.  The resolution of this deadline is in
+		microseconds (ranging from 1 to 100000 usecs).
+		Setting this attribute to 0 (the default) will disable
+		request-based DM's merge heuristic and associated extra
+		accounting.  This attribute is not applicable to
+		bio-based DM devices so it will only ever report 0 for
+		them.
+
+What:		/sys/block/dm-<num>/dm/use_blk_mq
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	dm-devel@redhat.com
+Description:	Request-based Device-mapper blk-mq I/O path mode.
+		Contains the value 1 if the device is using blk-mq.
+		Otherwise it contains 0. Read-only attribute.

Documentation/ABI/testing/sysfs-class-cxl

@@ -100,7 +100,7 @@ Description:    read only
 		Hexadecimal value of the device ID found in this AFU
 		configuration record.
 
-What:           /sys/class/cxl/<afu>/cr<config num>/vendor
+What:           /sys/class/cxl/<afu>/cr<config num>/class
 Date:           February 2015
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only

Documentation/ABI/testing/sysfs-class-mtd

@@ -222,3 +222,13 @@ Description:
 		The number of blocks that are marked as reserved, if any, in
 		this partition. These are typically used to store the in-flash
 		bad block table (BBT).
+
+What:		/sys/class/mtd/mtdX/offset
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For a partition, the offset of that partition from the start
+		of the master device in bytes. This attribute is absent on
+		main devices, so it can be used to distinguish between
+		partitions and devices that aren't partitions.

Documentation/ABI/testing/sysfs-driver-toshiba_acpi

@@ -8,9 +8,11 @@ Description:	This file controls the keyboard backlight operation mode, valid
 			* 0x2  -> AUTO (also called TIMER)
 			* 0x8  -> ON
 			* 0x10 -> OFF
-		Note that the kernel 3.16 onwards this file accepts all listed
+		Note that from kernel 3.16 onwards this file accepts all listed
 		parameters, kernel 3.15 only accepts the first two (FN-Z and
 		AUTO).
+		Also note that toggling this value on type 1 devices, requires
+		a reboot for changes to take effect.
 Users:		KToshiba
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
@@ -67,24 +69,81 @@ Description:	This file shows the current keyboard backlight type,
 			* 2 -> Type 2, supporting modes TIMER, ON and OFF
 Users:		KToshiba
 
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_charge
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Sleep & Charge charging mode, which
+		can be:
+			* 0 -> Disabled		(0x00)
+			* 1 -> Alternate	(0x09)
+			* 2 -> Auto		(0x21)
+			* 3 -> Typical		(0x11)
+		Note that from kernel 4.1 onwards this file accepts all listed
+		values, kernel 4.0 only supports the first three.
+		Note that this feature only works when connected to power, if
+		you want to use it under battery, see the entry named
+		"sleep_functions_on_battery"
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/sleep_functions_on_battery
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Sleep Functions under battery, and
+		set the level at which point they will be disabled, accepted
+		values can be:
+			* 0	-> Disabled
+			* 1-100	-> Battery level to disable sleep functions
+		Currently it prints two values, the first one indicates if the
+		feature is enabled or disabled, while the second one shows the
+		current battery level set.
+		Note that when the value is set to disabled, the sleep function
+		will only work when connected to power.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_rapid_charge
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the USB Rapid Charge state, which can be:
+			* 0 -> Disabled
+			* 1 -> Enabled
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
+
+What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_music
+Date:		January 23, 2015
+KernelVersion:	4.0
+Contact:	Azael Avalos <coproscefalo@gmail.com>
+Description:	This file controls the Sleep & Music state, which values can be:
+			* 0 -> Disabled
+			* 1 -> Enabled
+		Note that this feature only works when connected to power, if
+		you want to use it under battery, see the entry named
+		"sleep_functions_on_battery"
+Users:		KToshiba
+
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
-Date:		February, 2015
-KernelVersion:	3.20
+Date:		February 12, 2015
+KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file shows the current version of the driver
+Users:		KToshiba
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
-Date:		February, 2015
-KernelVersion:	3.20
+Date:		February 12, 2015
+KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the state of the internal fan, valid
 		values are:
 			* 0 -> OFF
 			* 1 -> ON
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
-Date:		February, 2015
-KernelVersion:	3.20
+Date:		February 12, 2015
+KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the Special Functions (hotkeys) operation
 		mode, valid values are:
@@ -94,21 +153,29 @@ Description:	This file controls the Special Functions (hotkeys) operation
 		and the hotkeys are accessed via FN-F{1-12}.
 		In the "Special Functions" mode, the F{1-12} keys trigger the
 		hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
-Date:		February, 2015
-KernelVersion:	3.20
+Date:		February 12, 2015
+KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls whether the laptop should turn ON whenever
 		the LID is opened, valid values are:
 			* 0 -> Disabled
 			* 1 -> Enabled
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
-Date:		February, 2015
-KernelVersion:	3.20
+Date:		February 12, 2015
+KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
-Description:	This file controls whether the USB 3 functionality, valid
-		values are:
+Description:	This file controls the USB 3 functionality, valid values are:
 			* 0 -> Disabled (Acts as a regular USB 2)
 			* 1 -> Enabled (Full USB 3 functionality)
+		Note that toggling this value requires a reboot for changes to
+		take effect.
+Users:		KToshiba

Documentation/ABI/testing/sysfs-platform-dell-laptop

@@ -0,0 +1,69 @@
+What:		/sys/class/leds/dell::kbd_backlight/als_enabled
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the automatic keyboard
+		illumination mode on some systems that have an ambient
+		light sensor. Write 1 to this file to enable the auto
+		mode, 0 to disable it.
+
+What:		/sys/class/leds/dell::kbd_backlight/als_setting
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to specifiy the on/off threshold value,
+		as reported by the ambient light sensor.
+
+What:		/sys/class/leds/dell::kbd_backlight/start_triggers
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to control the input triggers that
+		turn on the keyboard backlight illumination that is
+		disabled because of inactivity.
+		Read the file to see the triggers available. The ones
+		enabled are preceded by '+', those disabled by '-'.
+
+		To enable a trigger, write its name preceded by '+' to
+		this file. To disable a trigger, write its name preceded
+		by '-' instead.
+
+		For example, to enable the keyboard as trigger run:
+		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+		To disable it:
+		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+
+		Note that not all the available triggers can be configured.
+
+What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
+Date:		December 2014
+KernelVersion:	3.19
+Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+		Pali Rohár <pali.rohar@gmail.com>
+Description:
+		This file allows to specify the interval after which the
+		keyboard illumination is disabled because of inactivity.
+		The timeouts are expressed in seconds, minutes, hours and
+		days, for which the symbols are 's', 'm', 'h' and 'd'
+		respectively.
+
+		To configure the timeout, write to this file a value along
+		with any the above units. If no unit is specified, the value
+		is assumed to be expressed in seconds.
+
+		For example, to set the timeout to 10 minutes run:
+		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
+
+		Note that when this file is read, the returned value might be
+		expressed in a different unit than the one used when the timeout
+		was set.
+
+		Also note that only some timeouts are supported and that
+		some systems might fall back to a specific timeout in case
+		an invalid timeout is written to this file.