stmmac: remove specific SoC Koption from platform.

This patch removes all the Koptions added to build the glue-logic files
for all different architectures: DWMAC_MESON, DWMAC_SUNXI, DWMAC_STI ...
Nowadays the stmmac needs to be compiled on several platforms; in some
case it very convenient to guarantee that its build is always completed
with success on all the branches where the driver is present.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -18,56 +18,14 @@ config STMMAC_PLATFORM
 	depends on STMMAC_ETH
 	default y
 	---help---
-	  This selects the platform specific bus support for
-	  the stmmac device driver. This is the driver used
-	  on many embedded STM platforms based on ARM and SuperH
-	  processors.
+	  This selects the platform specific bus support for the stmmac driver.
+	  This is the driver used on several SoCs:
+	  STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
+
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
 
-config DWMAC_MESON
-	bool "Amlogic Meson dwmac support"
-	depends on STMMAC_PLATFORM && ARCH_MESON
-	help
-	  Support for Ethernet controller on Amlogic Meson SoCs.
-
-	  This selects the Amlogic Meson SoC glue layer support for
-	  the stmmac device driver. This driver is used for Meson6 and
-	  Meson8 SoCs.
-
-config DWMAC_SOCFPGA
-	bool "SOCFPGA dwmac support"
-	depends on STMMAC_PLATFORM && MFD_SYSCON && (ARCH_SOCFPGA || COMPILE_TEST)
-	help
-	  Support for ethernet controller on Altera SOCFPGA
-
-	  This selects the Altera SOCFPGA SoC glue layer support
-	  for the stmmac device driver. This driver is used for
-	  arria5 and cyclone5 FPGA SoCs.
-
-config DWMAC_SUNXI
-	bool "Allwinner GMAC support"
-	depends on STMMAC_PLATFORM && ARCH_SUNXI
-	default y
-	---help---
-	  Support for Allwinner A20/A31 GMAC ethernet controllers.
-
-	  This selects Allwinner SoC glue layer support for the
-	  stmmac device driver. This driver is used for A20/A31
-	  GMAC 	  ethernet controller.
-
-config DWMAC_STI
-	bool "STi GMAC support"
-	depends on STMMAC_PLATFORM && ARCH_STI
-	default y
-	---help---
-	  Support for ethernet controller on STi SOCs.
-
-	  This selects STi SoC glue layer support for the stmmac
-	  device driver. This driver is used on for the STi series
-	  SOCs GMAC ethernet controller.
-
 config STMMAC_PCI
 	bool "STMMAC PCI bus support"
 	depends on STMMAC_ETH && PCI

drivers/net/ethernet/stmicro/stmmac/Makefile

@@ -1,10 +1,8 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
-stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
 stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
-stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
-stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
-stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
-stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
+stmmac-$(CONFIG_STMMAC_PLATFORM) +=	stmmac_platform.o dwmac-meson.o \
+					dwmac-sunxi.o dwmac-sti.o \
+					dwmac-socfpga.o
 stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      chain_mode.o dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o \
 	      dwmac100_core.o dwmac100_dma.o enh_desc.o  norm_desc.o \

drivers/net/ethernet/stmicro/stmmac/stmmac.h

@@ -137,20 +137,13 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 
 #ifdef CONFIG_STMMAC_PLATFORM
-#ifdef CONFIG_DWMAC_MESON
 extern const struct stmmac_of_data meson6_dwmac_data;
-#endif
-#ifdef CONFIG_DWMAC_SUNXI
 extern const struct stmmac_of_data sun7i_gmac_data;
-#endif
-#ifdef CONFIG_DWMAC_STI
 extern const struct stmmac_of_data stih4xx_dwmac_data;
 extern const struct stmmac_of_data stid127_dwmac_data;
-#endif
-#ifdef CONFIG_DWMAC_SOCFPGA
 extern const struct stmmac_of_data socfpga_gmac_data;
-#endif
 extern struct platform_driver stmmac_pltfr_driver;
+
 static inline int stmmac_register_platform(void)
 {
 	int err;

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -30,22 +30,14 @@
 #include "stmmac.h"
 
 static const struct of_device_id stmmac_dt_ids[] = {
-#ifdef CONFIG_DWMAC_MESON
+	/* SoC specific glue layers should come before generic bindings */
 	{ .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
-#endif
-#ifdef CONFIG_DWMAC_SUNXI
 	{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
-#endif
-#ifdef CONFIG_DWMAC_STI
 	{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
 	{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
 	{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
 	{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
-#endif
-#ifdef CONFIG_DWMAC_SOCFPGA
 	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
-#endif
-	/* SoC specific glue layers should come before generic bindings */
 	{ .compatible = "st,spear600-gmac"},
 	{ .compatible = "snps,dwmac-3.610"},
 	{ .compatible = "snps,dwmac-3.70a"},