---

yaml
---
r: 351113
b: refs/heads/master
c: 8793422
h: refs/heads/master
i:
  351111: 43bf36a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 10baf04e95fbf7eb6089410220a547211dd2ffa7
+refs/heads/master: 8793422fd9ac5037f5047f80473007301df3689f

trunk/Documentation/ABI/testing/sysfs-bus-event_source-devices-events

@@ -0,0 +1,62 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: 		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_BRU_FIN
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_BRU_MPRED
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description:	POWER-systems specific performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by the POWER CPU. These events can be monitored
+		using the 'perf(1)' tool.
+
+		These events may not be supported by other CPUs.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+		Further, multiple terms like 'event=0xNNNN' can be specified
+		and separated with comma. All available terms are defined in
+		the /sys/bus/event_source/devices/<dev>/format file.

trunk/Documentation/ABI/testing/sysfs-platform-ts5500

@@ -0,0 +1,47 @@
+What:		/sys/devices/platform/ts5500/adc
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an A/D Converter. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/ereset
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an external reset. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/id
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Product ID of the TS board. TS-5500 ID is 0x60.
+
+What:		/sys/devices/platform/ts5500/jumpers
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Bitfield showing the jumpers' state. If a jumper is present,
+		the corresponding bit is set. For instance, 0x0e means jumpers
+		2, 3 and 4 are set.
+
+What:		/sys/devices/platform/ts5500/rs485
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the RS485 option. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/sram
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the SRAM option. If it is present,
+		it will display "1", otherwise "0".

trunk/Documentation/PCI/MSI-HOWTO.txt

@@ -127,15 +127,42 @@ on the number of vectors that can be allocated; pci_enable_msi_block()
 returns as soon as it finds any constraint that doesn't allow the
 call to succeed.
 
-4.2.3 pci_disable_msi
+4.2.3 pci_enable_msi_block_auto
+
+int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
+
+This variation on pci_enable_msi() call allows a device driver to request
+the maximum possible number of MSIs.  The MSI specification only allows
+interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
+
+If this function returns a positive number, it indicates that it has
+succeeded and the returned value is the number of allocated interrupts. In
+this case, the function enables MSI on this device and updates dev->irq to
+be the lowest of the new interrupts assigned to it.  The other interrupts
+assigned to the device are in the range dev->irq to dev->irq + returned
+value - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+If the device driver needs to know the number of interrupts the device
+supports it can pass the pointer count where that number is stored. The
+device driver must decide what action to take if pci_enable_msi_block_auto()
+succeeds, but returns a value less than the number of interrupts supported.
+If the device driver does not need to know the number of interrupts
+supported, it can set the pointer count to NULL.
+
+4.2.4 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
 This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block().  Calling it restores dev->irq to the pin-based
-interrupt number and frees the previously allocated message signaled
-interrupt(s).  The interrupt may subsequently be assigned to another
-device, so drivers should not cache the value of dev->irq.
+pci_enable_msi_block() or pci_enable_msi_block_auto().  Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s).  The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
 
 Before calling this function, a device driver must always call free_irq()
 on any interrupt for which it previously called request_irq().

trunk/Documentation/atomic_ops.txt

@@ -253,6 +253,8 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
+atomic_xchg requires explicit memory barriers around the operation.
+
 	int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,

trunk/Documentation/cgroups/00-INDEX

@@ -4,8 +4,6 @@ blkio-controller.txt
 	- Description for Block IO Controller, implementation and usage details.
 cgroups.txt
 	- Control Groups definition, implementation details, examples and API.
-cgroup_event_listener.c
-	- A user program for cgroup listener.
 cpuacct.txt
 	- CPU Accounting Controller; account CPU usage for groups of tasks.
 cpusets.txt

trunk/Documentation/cgroups/memcg_test.txt

@@ -399,8 +399,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 
  9.10 Memory thresholds
 	Memory controller implements memory thresholds using cgroups notification
-	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
-	it.
+	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
 
 	(Shell-A) Create cgroup and run event listener
 	# mkdir /cgroup/A

trunk/Documentation/devicetree/bindings/arm/atmel-aic.txt

@@ -4,7 +4,7 @@ Required properties:
 - compatible: Should be "atmel,<chip>-aic"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
   The second cell is used to specify flags:
     bits[3:0] trigger type and level flags:

trunk/Documentation/devicetree/bindings/arm/gic.txt

@@ -42,7 +42,7 @@ Main node required properties:
 
 Optional
 - interrupts	: Interrupt source of the parent interrupt controller on
-  secondary GICs, or VGIC maintainance interrupt on primary GIC (see
+  secondary GICs, or VGIC maintenance interrupt on primary GIC (see
   below).
 
 - cpu-offset	: per-cpu offset within the distributor and cpu interface
@@ -74,7 +74,7 @@ Required properties:
   virtual interface control register base and size. The 2nd additional
   region is the GIC virtual cpu interface register base and size.
 
-- interrupts : VGIC maintainance interrupt.
+- interrupts : VGIC maintenance interrupt.
 
 Example:
 

trunk/Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -39,16 +39,16 @@ Boards:
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
 
-- OMAP4 SDP : Software Developement Board
+- OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"
 
 - OMAP4 PandaBoard : Low cost community board
   compatible = "ti,omap4-panda", "ti,omap4430"
 
-- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x
+- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
   compatible = "ti,omap3-evm", "ti,omap3"
 
-- AM335X EVM : Software Developement Board for AM335x
+- AM335X EVM : Software Development Board for AM335x
   compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
 
 - AM335X Bone : Low cost community board

trunk/Documentation/devicetree/bindings/clock/prima2-clock.txt

@@ -0,0 +1,73 @@
+* Clock bindings for CSR SiRFprimaII
+
+Required properties:
+- compatible: Should be "sirf,prima2-clkc"
+- reg: Address and length of the register set
+- interrupts: Should contain clock controller interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of prima2
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	rtc			0
+	osc             	1
+	pll1            	2
+	pll2            	3
+	pll3            	4
+	mem             	5
+	sys             	6
+	security        	7
+	dsp             	8
+	gps             	9
+	mf              	10
+	io              	11
+	cpu             	12
+	uart0           	13
+	uart1           	14
+	uart2           	15
+	tsc             	16
+	i2c0            	17
+	i2c1            	18
+	spi0            	19
+	spi1            	20
+	pwmc            	21
+	efuse           	22
+	pulse           	23
+	dmac0           	24
+	dmac1           	25
+	nand            	26
+	audio           	27
+	usp0            	28
+	usp1            	29
+	usp2            	30
+	vip             	31
+	gfx             	32
+	mm              	33
+	lcd             	34
+	vpp             	35
+	mmc01           	36
+	mmc23           	37
+	mmc45           	38
+	usbpll          	39
+	usb0            	40
+	usb1			41
+
+Examples:
+
+clks: clock-controller@88000000 {
+	compatible = "sirf,prima2-clkc";
+	reg = <0x88000000 0x1000>;
+	interrupts = <3>;
+	#clock-cells = <1>;
+};
+
+i2c0: i2c@b00e0000 {
+	cell-index = <0>;
+	compatible = "sirf,prima2-i2c";
+	reg = <0xb00e0000 0x10000>;
+	interrupts = <24>;
+	clocks = <&clks 17>;
+};

trunk/Documentation/devicetree/bindings/drm/exynos/g2d.txt

@@ -0,0 +1,22 @@
+Samsung 2D Graphic Accelerator using DRM frame work
+
+Samsung FIMG2D is a graphics 2D accelerator which supports Bit Block Transfer.
+We set the drawing-context registers for configuring rendering parameters and
+then start rendering.
+This driver is for SOCs which contain G2D IPs with version 4.1.
+
+Required properties:
+	-compatible:
+		should be "samsung,exynos-g2d-41".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+
+Example:
+	g2d {
+		compatible = "samsung,exynos-g2d-41";
+		reg = <0x10850000 0x1000>;
+		interrupts = <0 91 0>;
+	};

trunk/Documentation/devicetree/bindings/i2c/ina209.txt

@@ -0,0 +1,18 @@
+ina209 properties
+
+Required properties:
+- compatible: Must be "ti,ina209"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+	Shunt resistor value in micro-Ohm
+
+Example:
+
+temp-sensor@4c {
+	compatible = "ti,ina209";
+	reg = <0x4c>;
+	shunt-resistor = <5000>;
+};