---

yaml
---
r: 311809
b: refs/heads/master
c: 5f8ebd3
h: refs/heads/master
i:
  311807: 052eac7
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a77171806515fb5e2288219ddb47af1f0b1328e7
+refs/heads/master: 5f8ebd36f7dd95ec97aec82d5907522dc54e85ba

trunk/arch/arm/configs/omap2plus_defconfig

@@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y

trunk/arch/arm/mach-omap2/clockdomain.h

@@ -31,12 +31,16 @@
  *
  * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
  *     clockdomain.  (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ *     active whenever the MPU is active.  True for interconnects and
+ *     the WKUP clockdomains.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
 #define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)

trunk/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c

@@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
 	.dep_bit	= OMAP_EN_WKUP_SHIFT,
+	.flags		= CLKDM_ACTIVE_WITH_MPU,
 };

trunk/arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
 	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
 	.dep_bit	  = OMAP4430_L4WKUP_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
 };
 
 static struct clockdomain emu_sys_44xx_clkdm = {

trunk/arch/arm/mach-omap2/omap_hwmod.c

@@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
  * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby.  No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes.  No return value.
  */
 static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
+	bool clkdm_act;
 
 	if (!oh->class->sysc)
 		return;
@@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		clkdm_act = ((oh->clkdm &&
+			      oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+			     (oh->_clk && oh->_clk->clkdm &&
+			      oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+		if (clkdm_act && !(oh->class->sysc->idlemodes &
+				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    !(oh->class->sysc->idlemodes &
+		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 

trunk/arch/arm/mach-shmobile/platsmp.c

@@ -22,8 +22,13 @@
 #include <mach/common.h>
 #include <mach/emev2.h>
 
+#ifdef CONFIG_ARCH_SH73A0
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
 #define is_r8a7779() machine_is_marzen()
 
 #ifdef CONFIG_ARCH_EMEV2

trunk/arch/arm/mach-ux500/board-mop500.c

@@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&ab8500_device,
 };
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
@@ -769,6 +764,11 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+	&snowball_led_dev,
+	&snowball_key_dev,
+};
+
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+	/* Requires device name bindings. */
+	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
 	{},
 };
 

trunk/arch/arm/mach-ux500/timer.c

@@ -63,8 +63,10 @@ static void __init ux500_timer_init(void)
 
 	/* TODO: Once MTU has been DT:ed place code above into else. */
 	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
 		np = of_find_matching_node(NULL, prcmu_timer_of_match);
 		if (!np)
+#endif
 			goto dt_fail;
 
 		tmp_base = of_iomap(np, 0);

trunk/arch/mips/pci/pci-lantiq.c

@@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
 
 	/* setup reset gpio used by pci */
 	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-	if (reset_gpio > 0)
+	if (gpio_is_valid(reset_gpio))
 		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
 
 	/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
 
 	/* toggle reset pin */
-	if (reset_gpio > 0) {
+	if (gpio_is_valid(reset_gpio)) {
 		__gpio_set_value(reset_gpio, 0);
 		wmb();
 		mdelay(1);

trunk/arch/mn10300/include/asm/thread_info.h

@@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void)
 }
 
 #ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
 #endif
 #define get_thread_info(ti)	get_task_struct((ti)->task)
 #define put_thread_info(ti)	put_task_struct((ti)->task)

trunk/arch/powerpc/include/asm/hw_irq.h

@@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void)
 }
 
 #ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable()	asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable()	asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable()	asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable()	asm volatile("wrteei 0" : : : "memory")
 #else
 #define __hard_irq_enable()	__mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(local_paca->kernel_msr, 1)
@@ -125,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
 	return !regs->softe;
 }
 
+extern bool prep_irq_for_idle(void);
+
 #else /* CONFIG_PPC64 */
 
 #define SET_MSR_EE(x)	mtmsr(x)

trunk/arch/powerpc/kernel/irq.c

@@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en)
 	 */
 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
 		__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
 	else {
 		/*
 		 * We should already be hard disabled here. We had bugs
@@ -286,6 +286,52 @@ void notrace restore_interrupts(void)
 		__hard_irq_enable();
 }
 
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+	/*
+	 * First we need to hard disable to ensure no interrupt
+	 * occurs before we effectively enter the low power state
+	 */
+	hard_irq_disable();
+
+	/*
+	 * If anything happened while we were soft-disabled,
+	 * we return now and do not enter the low power state.
+	 */
+	if (lazy_irq_pending())
+		return false;
+
+	/* Tell lockdep we are about to re-enable */
+	trace_hardirqs_on();
+
+	/*
+	 * Mark interrupts as soft-enabled and clear the
+	 * PACA_IRQ_HARD_DIS from the pending mask since we
+	 * are about to hard enable as well as a side effect
+	 * of entering the low power state.
+	 */
+	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	local_paca->soft_enabled = 1;
+
+	/* Tell the caller to enter the low power state */
+	return true;
+}
+
 #endif /* CONFIG_PPC64 */
 
 int arch_show_interrupts(struct seq_file *p, int prec)

trunk/arch/powerpc/mm/numa.c

@@ -639,7 +639,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
 	unsigned int n, rc, ranges, is_kexec_kdump = 0;
 	unsigned long lmb_size, base, size, sz;
 	int nid;
-	struct assoc_arrays aa;
+	struct assoc_arrays aa = { .arrays = NULL };
 
 	n = of_get_drconf_memory(memory, &dm);
 	if (!n)

trunk/arch/powerpc/platforms/cell/pervasive.c

@@ -42,11 +42,9 @@ static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
 
-	/*
-	 * We need to hard disable interrupts, the local_irq_enable() done by
-	 * our caller upon return will hard re-enable.
-	 */
-	hard_irq_disable();
+	/* Ensure our interrupt state is properly tracked */
+	if (!prep_irq_for_idle())
+		return;
 
 	ctrl = mfspr(SPRN_CTRLF);
 
@@ -81,6 +79,9 @@ static void cbe_power_save(void)
 	 */
 	ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
 	mtspr(SPRN_CTRLT, ctrl);
+
+	/* Re-enable interrupts in MSR */
+	__hard_irq_enable();
 }
 
 static int cbe_system_reset_exception(struct pt_regs *regs)

trunk/arch/powerpc/platforms/pseries/processor_idle.c

@@ -99,15 +99,18 @@ static int snooze_loop(struct cpuidle_device *dev,
 static void check_and_cede_processor(void)
 {
 	/*
-	 * Interrupts are soft-disabled at this point,
-	 * but not hard disabled. So an interrupt might have
-	 * occurred before entering NAP, and would be potentially
-	 * lost (edge events, decrementer events, etc...) unless
-	 * we first hard disable then check.
+	 * Ensure our interrupt state is properly tracked,
+	 * also checks if no interrupt has occurred while we
+	 * were soft-disabled
 	 */
-	hard_irq_disable();
-	if (!lazy_irq_pending())
+	if (prep_irq_for_idle()) {
 		cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+		/* Ensure that H_CEDE returns with IRQs on */
+		if (WARN_ON(!(mfmsr() & MSR_EE)))
+			__hard_irq_enable();
+#endif
+	}
 }
 
 static int dedicated_cede_loop(struct cpuidle_device *dev,

trunk/drivers/acpi/acpica/hwsleep.c

@@ -95,18 +95,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags)
 		return_ACPI_STATUS(status);
 	}
 
-	if (sleep_state != ACPI_STATE_S5) {
-		/*
-		 * Disable BM arbitration. This feature is contained within an
-		 * optional register (PM2 Control), so ignore a BAD_ADDRESS
-		 * exception.
-		 */
-		status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
-		if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
 	/*
 	 * 1) Disable/Clear all GPEs
 	 * 2) Enable all wakeup GPEs
@@ -364,16 +352,6 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags)
 				    [ACPI_EVENT_POWER_BUTTON].
 				    status_register_id, ACPI_CLEAR_STATUS);
 
-	/*
-	 * Enable BM arbitration. This feature is contained within an
-	 * optional register (PM2 Control), so ignore a BAD_ADDRESS
-	 * exception.
-	 */
-	status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
-	if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
-		return_ACPI_STATUS(status);
-	}
-
 	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
 	return_ACPI_STATUS(status);
 }

trunk/drivers/gpio/Kconfig

@@ -136,7 +136,7 @@ config GPIO_MPC8XXX
 
 config GPIO_MSM_V1
 	tristate "Qualcomm MSM GPIO v1"
-	depends on GPIOLIB && ARCH_MSM
+	depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
 	help
 	  Say yes here to support the GPIO interface on ARM v6 based
 	  Qualcomm MSM chips.  Most of the pins on the MSM can be

trunk/drivers/gpio/devres.c

@@ -98,6 +98,7 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
 
 	return 0;
 }
+EXPORT_SYMBOL(devm_gpio_request_one);
 
 /**
  *      devm_gpio_free - free an interrupt

trunk/drivers/gpio/gpio-mxc.c

@@ -398,10 +398,12 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	writel(~0, port->base + GPIO_ISR);
 
 	if (mxc_gpio_hwtype == IMX21_GPIO) {
-		/* setup one handler for all GPIO interrupts */
-		if (pdev->id == 0)
-			irq_set_chained_handler(port->irq,
-						mx2_gpio_irq_handler);
+		/*
+		 * Setup one handler for all GPIO interrupts. Actually setting
+		 * the handler is needed only once, but doing it for every port
+		 * is more robust and easier.
+		 */
+		irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
 	} else {
 		/* setup one handler for each entry */
 		irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);