Merge branch 'linux-2.6' into next

git-mirror · Dec 18, 2008 · c280266 · c280266
2 parents eddce36 + 55dac3a
commit c280266
Show file tree

Hide file tree

Showing 57 changed files with 387 additions and 301 deletions.
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------

diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget

diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,

diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1527,10 +1527,10 @@ W:	http://ebtables.sourceforge.net/
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Mike Halcrow, Phillip Hellewell
-M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:	ecryptfs-devel@lists.sourceforge.net
-W:	http://ecryptfs.sourceforge.net/
+P:	Tyler Hicks, Dustin Kirkland
+M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:	ecryptfs-devel@lists.launchpad.net
+W:	https://launchpad.net/ecryptfs
 S:	Supported
 
 EDAC-CORE

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (!sachip->clk) {
+	if (IS_ERR(sachip->clk)) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}

diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
@@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 

diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>

diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@ menu "HP Simulator drivers"
 
 config HP_SIMETH
 	bool "Simulated Ethernet "
+	depends on NET
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
@@ -486,13 +486,13 @@ _GLOBAL(_tlbil_va)
 	tlbsx	0,r3
 	mfspr	r4,SPRN_MAS1		/* check valid */
 	andis.	r3,r4,MAS1_VALID@h
-	beqlr
+	beq	1f
 	rlwinm	r4,r4,0,1,31
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 	msync
 	isync
-	wrtee	r10
+1:	wrtee	r10
 	blr
 #endif /* CONFIG_FSL_BOOKE */
 

diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
 		be = blk->start + blk->size;
 		if (s >= bs && e <= be)
 			break;
+		blk = NULL;
 	}
 
 	if (blk == NULL)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
@@ -55,6 +55,8 @@ config GENERIC_HARDIRQS
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
+	depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+				!SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
 	def_bool y

diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
-	}
 
-	/* Register input device for kill switch */
-	toshiba_acpi.poll_dev = input_allocate_polled_device();
-	if (!toshiba_acpi.poll_dev) {
-		printk(MY_ERR "unable to allocate kill-switch input device\n");
-		toshiba_acpi_exit();
-		return -ENOMEM;
-	}
-	toshiba_acpi.poll_dev->private = &toshiba_acpi;
-	toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-	toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-	toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-	toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-	toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-	input_sync(toshiba_acpi.poll_dev->input);
-
-	ret = input_register_polled_device(toshiba_acpi.poll_dev);
-	if (ret) {
-		printk(MY_ERR "unable to register kill-switch input device\n");
-		toshiba_acpi_exit();
-		return ret;
+		/* Register input device for kill switch */
+		toshiba_acpi.poll_dev = input_allocate_polled_device();
+		if (!toshiba_acpi.poll_dev) {
+			printk(MY_ERR
+			       "unable to allocate kill-switch input device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+		toshiba_acpi.poll_dev->private = &toshiba_acpi;
+		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+		/* Toshiba USB ID */
+		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+		input_report_switch(toshiba_acpi.poll_dev->input,
+				    SW_RFKILL_ALL, TRUE);
+		input_sync(toshiba_acpi.poll_dev->input);
+
+		ret = input_register_polled_device(toshiba_acpi.poll_dev);
+		if (ret) {
+			printk(MY_ERR
+			       "unable to register kill-switch input device\n");
+			toshiba_acpi_exit();
+			return ret;
+		}
 	}
 
 	return 0;

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
@@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
 
 	/* Seagate NCQ + FLUSH CACHE firmware bug */
-	{ "ST31500341AS",	"9JU138",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"9FZ136",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"9FZ164",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"9FZ134",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"9FZ182",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"9FZ162",	ATA_HORKAGE_NONCQ |
+
+	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 			mask &= ~(0xF8 << ATA_SHIFT_UDMA);
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-	}
+	} else if (adev->class == ATA_DEV_ATAPI)
+		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
 	return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
 
+	/*
+	 * Each channel of pata_hpt366 occupies separate PCI function
+	 * as the primary channel and bit1 indicates the cable type.
+	 */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & 2)
 		return ATA_CBL_PATA40;
 	return ATA_CBL_PATA80;
 }

diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *

diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *

diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *

diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.