---

yaml
---
r: 329766
b: refs/heads/master
c: d66e673
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c9f97a27ceee84998999bf3341e6d5d207b05539
+refs/heads/master: d66e6737d454553e1e62109d8298ede5351178a4

trunk/Documentation/ABI/testing/ima_policy

@@ -12,48 +12,65 @@ Description:
 		then closing the file.  The new policy takes effect after
 		the file ima/policy is closed.
 
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
 		rule format: action [condition ...]
 
-		action: measure | dont_measure
+		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm
-			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			base:	[[func=] [mask=] [fsmagic=] [uid=] [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
 		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
+			fowner:=decimal value
 		lsm:  	are LSM specific
 
 		default policy:
 			# PROC_SUPER_MAGIC
 			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
 			# SYSFS_MAGIC
 			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
 			# DEBUGFS_MAGIC
 			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
 			# TMPFS_MAGIC
 			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_measure fsmagic=0x858458f6
+			dont_appraise fsmagic=0x858458f6
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
+			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in do_filp_open.
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
 
 		Examples of LSM specific definitions:
 
 		SELinux:
 			# SELINUX_MAGIC
-			dont_measure fsmagic=0xF97CFF8C
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
 
 			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
 			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
 			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -220,3 +220,10 @@ Description:
 		If the device doesn't support LTM, the file will read "no".
 		The file will be present for all speeds of USB devices, and will
 		always read "no" for USB 1.1 and USB 2.0 devices.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX
+Date:		August 2012
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		The /sys/bus/usb/devices/.../(hub interface)/portX
+		is usb port device's sysfs directory.

trunk/Documentation/ABI/testing/sysfs-class-extcon

@@ -13,7 +13,7 @@ Description:
 		accessory cables have such capability. For example,
 		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
 		may have both HDMI and Charger attached, or analog audio,
-		video, and USB cables attached simulteneously.
+		video, and USB cables attached simultaneously.
 
 		If there are cables mutually exclusive with each other,
 		such binary relations may be expressed with extcon_dev's
@@ -35,7 +35,7 @@ Description:
 		The /sys/class/extcon/.../state shows and stores the cable
 		attach/detach information of the corresponding extcon object.
 		If the extcon object has an optional callback "show_state"
-		defined, the showing function is overriden with the optional
+		defined, the showing function is overridden with the optional
 		callback.
 
 		If the default callback for showing function is used, the
@@ -46,19 +46,19 @@ Description:
 		TA=1
 		EAR_JACK=0
 		#
-		In this example, the extcon device have USB_OTG and TA
+		In this example, the extcon device has USB_OTG and TA
 		cables attached and HDMI and EAR_JACK cables detached.
 
 		In order to update the state of an extcon device, enter a hex
-		state number starting with 0x.
-		 echo 0xHEX > state
+		state number starting with 0x:
+		# echo 0xHEX > state
 
-		This updates the whole state of the extcon dev.
+		This updates the whole state of the extcon device.
 		Inputs of all the methods are required to meet the
-		mutually_exclusive contidions if they exist.
+		mutually_exclusive conditions if they exist.
 
 		It is recommended to use this "global" state interface if
-		you need to enter the value atomically. The later state
+		you need to set the value atomically. The later state
 		interface associated with each cable cannot update
 		multiple cable states of an extcon device simultaneously.
 
@@ -73,7 +73,7 @@ What:		/sys/class/extcon/.../cable.x/state
 Date:		February 2012
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/extcon/.../cable.x/name shows and stores the
+		The /sys/class/extcon/.../cable.x/state shows and stores the
 		state of cable "x" (integer between 0 and 31) of an extcon
 		device. The state value is either 0 (detached) or 1
 		(attached).
@@ -83,8 +83,8 @@ Date:		December 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		Shows the relations of mutually exclusiveness. For example,
-		if the mutually_exclusive array of extcon_dev is
-		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is:
 		# ls mutually_exclusive/
 		0x3
 		0x5

trunk/Documentation/ABI/testing/sysfs-class-regulator

@@ -349,3 +349,24 @@ Description:
 
 		This will be one of the same strings reported by
 		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.

trunk/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb

@@ -0,0 +1,44 @@
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_alpha
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the alpha blending value for the overlay. Values range
+		from 0 (transparent) to 255 (opaque). The value is ignored if
+		the mode is not set to Alpha Blending.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_mode
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Selects the composition mode for the overlay. Possible values
+		are
+
+		0 - Alpha Blending
+		1 - ROP3
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the x,y overlay position on the display in pixels. The
+		position format is `[0-9]+,[0-9]+'.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the raster operation (ROP3) for the overlay. Values
+		range from 0 to 255. The value is ignored if the mode is not
+		set to ROP3.

trunk/Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -176,3 +176,14 @@ Description:	Disable L3 cache indices
 		All AMD processors with L3 caches provide this functionality.
 		For details, see BKDGs at
 		http://developer.amd.com/documentation/guides/Pages/default.aspx
+
+
+What:		/sys/devices/system/cpu/cpufreq/boost
+Date:		August 2012
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Processor frequency boosting control
+
+		This switch controls the boost setting for the whole system.
+		Boosting allows the CPU and the firmware to run at a frequency
+		beyound it's nominal limit.
+		More details can be found in Documentation/cpu-freq/boost.txt

trunk/Documentation/ABI/testing/sysfs-driver-ppi

@@ -0,0 +1,70 @@
+What:		/sys/devices/pnp0/<bus-num>/ppi/
+Date:		August 2012
+Kernel Version:	3.6
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This folder includes the attributes related with PPI (Physical
+		Presence Interface). Only if TPM is supported by BIOS, this
+		folder makes sence. The folder path can be got by command
+		'find /sys/ -name 'pcrs''. For the detail information of PPI,
+		please refer to the PPI specification from
+		http://www.trustedcomputinggroup.org/
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/version
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the version of the PPI supported by the
+		platform.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/request
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the request for an operation to be
+		executed in the pre-OS environment. It is the only input from
+		the OS to the pre-OS environment. The request should be an
+		integer value range from 1 to 160, and 0 means no request.
+		This file can be read and written.
+
+What:		/sys/devices/pnp0/00:<bus-num>/ppi/response
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the response to the most recent operation
+		request it acted upon. The format is "<request> <response num>
+		: <response description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/transition_action
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the platform-specific action that should
+		take place in order to transition to the BIOS for execution of
+		a requested operation. The format is "<action num>: <action
+		description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/tcg_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the requests defined by TCG, i.e. requests from 1 to 22.
+		The format is "<request> <status num>: <status description>".
+		This attribute is only supported by PPI version 1.2+.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/vs_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the verdor specific requests, i.e. requests from 128 to
+		255. The format is same with tcg_operations. This attribute
+		is also only supported by PPI version 1.2+.
+		This file is readonly.

trunk/Documentation/ABI/testing/sysfs-driver-wacom

@@ -1,3 +1,16 @@
+WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
+Date:		June 2012
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/oled*_img files control
+		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
+		has to contain 256 bytes (64x32 px 1 bit colour). The format
+		is the same as PBM image 62x32px without header (64 bits per
+		horizontal line, 32 lines). An example of setting OLED No. 0:
+		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
+		The attribute is read only and no local copy of the image is
+		stored.
+
 What:		/sys/class/hidraw/hidraw*/device/speed
 Date:		April 2010
 Kernel Version:	2.6.35

trunk/Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -5,4 +5,15 @@ Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
 
+What:		/sys/devices/platform/ideapad/fan_mode
+Date:		June 2012
+KernelVersion:	3.6
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Change fan mode
+		There are four available modes:
+			* 0 -> Super Silent Mode
+			* 1 -> Standard Mode
+			* 2 -> Dust Cleaning
+			* 4 -> Efficient Thermal Dissipation Mode
 

trunk/Documentation/ABI/testing/sysfs-ptp

@@ -19,7 +19,11 @@ Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the name of the PTP hardware clock
-		as a human readable string.
+		as a human readable string. The purpose of this
+		attribute is to provide the user with a "friendly
+		name" and to help distinguish PHY based devices from
+		MAC based ones. The string does not necessarily have
+		to be any kind of unique id.
 
 What:		/sys/class/ptp/ptpN/max_adjustment
 Date:		September 2010

trunk/Documentation/ABI/testing/sysfs-tty

@@ -17,3 +17,12 @@ Description:
 		 device, like 'tty1'.
 		 The file supports poll() to detect virtual
 		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+