---

yaml
---
r: 40812
b: refs/heads/master
c: 6c0ffb9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: de8e7c12430a73654ae3cedbc45428d56c6b777b
+refs/heads/master: 6c0ffb9d2fd987c79c6cbb81c3f3011c63749b1a

trunk/arch/i386/pci/mmconfig.c

@@ -154,6 +154,38 @@ static struct pci_raw_ops pci_mmcfg = {
 	.write =	pci_mmcfg_write,
 };
 
+
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+	int i;
+	struct resource *res;
+	char *names;
+	unsigned num_buses;
+
+	res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+			pci_mmcfg_config_num, GFP_KERNEL);
+
+	if (!res) {
+		printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+		return;
+	}
+
+	names = (void *)&res[pci_mmcfg_config_num];
+	for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+		num_buses = pci_mmcfg_config[i].end_bus_number -
+		    pci_mmcfg_config[i].start_bus_number + 1;
+		res->name = names;
+		snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+			pci_mmcfg_config[i].pci_segment_group_number);
+		res->start = pci_mmcfg_config[i].base_address;
+		res->end = res->start + (num_buses << 20) - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		insert_resource(&iomem_resource, res);
+		names += PCI_MMCFG_RESOURCE_NAME_LEN;
+	}
+}
+
 /* K8 systems have some devices (typically in the builtin northbridge)
    that are only accessible using type1
    Normally this can be expressed in the MCFG by not listing them
@@ -190,6 +222,8 @@ static __init void unreachable_devices(void)
 	}
 }
 
+
+
 void __init pci_mmcfg_init(int type)
 {
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
@@ -217,4 +251,5 @@ void __init pci_mmcfg_init(int type)
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
 
 	unreachable_devices();
+	pci_mmcfg_insert_resources();
 }

trunk/arch/x86_64/kernel/io_apic.c

@@ -88,6 +88,52 @@ static struct irq_pin_list {
 	short apic, pin, next;
 } irq_2_pin[PIN_MAP_SIZE];
 
+struct io_apic {
+	unsigned int index;
+	unsigned int unused[3];
+	unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(value, &io_apic->data);
+}
+
+/*
+ * Synchronize the IO-APIC and the CPU by doing
+ * a dummy read from the IO-APIC
+ */
+static inline void io_apic_sync(unsigned int apic)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	readl(&io_apic->data);
+}
+
 #define __DO_ACTION(R, ACTION, FINAL)					\
 									\
 {									\

trunk/include/asm-x86_64/io_apic.h

@@ -12,10 +12,6 @@
 
 #define APIC_MISMATCH_DEBUG
 
-#define IO_APIC_BASE(idx) \
-		((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
-
 /*
  * The structure of the IO-APIC:
  */
@@ -119,36 +115,6 @@ extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 /* non-0 if default (table-less) MP configuration */
 extern int mpc_default_type;
 
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	*IO_APIC_BASE(apic) = reg;
-	return *(IO_APIC_BASE(apic)+4);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	*IO_APIC_BASE(apic) = reg;
-	*(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int value)
-{
-	*(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
-	(void) *(IO_APIC_BASE(apic)+4);
-}
-
 /* 1 if "noapic" boot option passed */
 extern int skip_ioapic_setup;