Merge 3.7-rc1 into tty-linus

This syncs up the tty-linus branch to the latest in Linus's tree to get all of
the UAPI stuff needed for the next set of patches to merge.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.gitignore

@@ -14,6 +14,10 @@
 *.o.*
 *.a
 *.s
+*.ko.unsigned
+*.ko.stripped
+*.ko.stripped.dig
+*.ko.stripped.sig
 *.ko
 *.so
 *.so.dbg
@@ -84,3 +88,13 @@ GTAGS
 *.orig
 *~
 \#*#
+
+#
+# Leavings from module signing
+#
+extra_certificates
+signing_key.priv
+signing_key.x509
+signing_key.x509.keyid
+signing_key.x509.signer
+x509.genkey

Documentation/00-INDEX

@@ -270,8 +270,6 @@ preempt-locking.txt
 	- info on locking under a preemptive kernel.
 printk-formats.txt
 	- how to get printk format specifiers right
-prio_tree.txt
-	- info on radix-priority-search-tree use for indexing vmas.
 ramoops.txt
 	- documentation of the ramoops oops/panic logging module.
 rbtree.txt

Documentation/ABI/testing/sysfs-block

@@ -206,3 +206,17 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
+
+What:		/sys/block/<disk>/queue/write_same_max_bytes
+Date:		January 2012
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Some devices support a write same operation in which a
+		single data block can be written to a range of several
+		contiguous blocks on storage. This can be used to wipe
+		areas on disk or to initialize drives in a RAID
+		configuration. write_same_max_bytes indicates how many
+		bytes can be written in a single write same command. If
+		write_same_max_bytes is 0, write same is not supported
+		by the device.
+

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -9,19 +9,19 @@ Attributes:
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
-	lesb_link_fail:   Link Error Status Block (LESB) link failure count.
+	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
 
-	lesb_vlink_fail:  Link Error Status Block (LESB) virtual link
+	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
 			  failure count.
 
-	lesb_miss_fka:    Link Error Status Block (LESB) missed FCoE
+	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
 			  Initialization Protocol (FIP) Keep-Alives (FKA).
 
-	lesb_symb_err:    Link Error Status Block (LESB) symbolic error count.
+	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
 
-	lesb_err_block:   Link Error Status Block (LESB) block error count.
+	lesb/err_block:   Link Error Status Block (LESB) block error count.
 
-	lesb_fcs_error:   Link Error Status Block (LESB) Fibre Channel
+	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
 			  Serivces error count.
 
 Notes: ctlr_X (global increment starting at 0)

Documentation/ABI/testing/sysfs-bus-rbd

@@ -25,6 +25,10 @@ client_id
 
 	The ceph unique client id that was assigned for this specific session.
 
+features
+
+	A hexadecimal encoding of the feature bits for this image.
+
 major
 
 	The block device major number.
@@ -33,6 +37,11 @@ name
 
 	The name of the rbd image.
 
+image_id
+
+	The unique id for the rbd image.  (For rbd image format 1
+	this is empty.)
+
 pool
 
 	The name of the storage pool where this rbd image resides.
@@ -57,12 +66,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot
@@ -79,4 +82,7 @@ snap_size
 
 	The size of the image when this snapshot was taken.
 
+snap_features
+
+	A hexadecimal encoding of the feature bits for this snapshot.
 

Documentation/ABI/testing/sysfs-devices-firmware_node

@@ -0,0 +1,17 @@
+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.

Documentation/ABI/testing/sysfs-fs-ext4

@@ -96,3 +96,16 @@ Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
 		The maximum number of megabytes the writeback code will
 		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).

Documentation/CodingStyle

@@ -454,6 +454,16 @@ The preferred style for long (multi-line) comments is:
 	 * with beginning and ending almost-blank lines.
 	 */
 
+For files in net/ and drivers/net/ the preferred style for long (multi-line)
+comments is a little different.
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
 It's also important to comment data, whether they are basic types or derived
 types.  To this end, use just one data declaration per line (no commas for
 multiple data declarations).  This leaves you room for a small comment on each

Documentation/DocBook/media/Makefile

@@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
 	@(								\
 	for ident in $(IOCTLS) ; do					\
 	  entity=`echo $$ident | tr _ -` ;				\
-	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
+	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
 	  echo "<!ENTITY $$entity \"<link"				\
 	    "linkend='$$id'><constant>$$ident</constant></link>\">"	\
 	  >>$@ ;							\

Documentation/DocBook/media/dvb/audio.xml

@@ -1,12 +1,16 @@
 <title>DVB Audio Device</title>
 <para>The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It
 can be accessed through <emphasis role="tt">/dev/dvb/adapter0/audio0</emphasis>. Data types and and
-ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/audio.h</emphasis> in your
 application.
 </para>
 <para>Please note that some DVB cards don&#8217;t have their own MPEG decoder, which results in
 the omission of the audio and video device.
 </para>
+<para>
+These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use
+of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls
+have been created to replace that functionality.</para>
 
 <section id="audio_data_types">
 <title>Audio Data Types</title>
@@ -558,6 +562,8 @@ role="subsection"><title>AUDIO_SELECT_SOURCE</title>
 role="subsection"><title>AUDIO_SET_MUTE</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; with the <constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant> flag instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the audio device to mute the stream that is currently being
@@ -730,6 +736,8 @@ role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
 role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+<constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> control instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the Audio Device to select the requested channel if possible.</para>
@@ -772,6 +780,109 @@ role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
  </row></tbody></tgroup></informaltable>
 &return-value-dvb;
 
+</section><section id="AUDIO_BILINGUAL_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_BILINGUAL_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. It has been replaced by
+the V4L2 <constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> control
+for MPEG decoders controlled through V4L2.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row>
+</tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_PTS"
+role="subsection"><title>AUDIO_GET_PTS</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. If you need this functionality,
+then please contact the linux-media mailing list (&v4l-ml;).</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current PTS timestamp.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_PTS, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_PTS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+</para>
+<para>
+The PTS should belong to the currently played
+frame if possible, but may also be a value close to it
+like the PTS of the last decoded frame or the last PTS
+extracted by the PES parser.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
 </section><section id="AUDIO_GET_STATUS"
 role="subsection"><title>AUDIO_GET_STATUS</title>
 <para>DESCRIPTION