Merge tag 'omap-for-v3.14/board-removal-safe' of git://git.kernel.org…

…/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

From Tony Lindgren:
Make omap2420 and 2430 boot in device tree only mode and prepare things
for removing omap3 legacy booting support.

We can make omap2420 and 2430 boot in device tree only mode by keeping
board-n8x0.c around until Menelaus has device tree and regulator support
so devices still work. For the omap2430-sdp we have omap2430-sdp.dts,
and there's also a minimal support for H4 in omap2420-h4.dts.

For omap3, let's not drop the legacy platform booting quite yet so
people have a little time to update their booting system.

With the fixes going into v3.13, thing should behave pretty much the
same way for legacy booting and device tree based booting for omap3.

So people using omap3 based boards, please update your systems to
boot in device tree mode as omap3 is the last SoC in mach-omap2
that boots in the legacy mode.

* tag 'omap-for-v3.14/board-removal-safe' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (299 commits)
  ARM: dts: Add basic devices on am3517-evm
  ARM: OMAP2+: Use pdata quirks for emac on am3517
  ARM: OMAP2+: Add support for legacy auxdata for twl
  ARM: dts: Fix booting for secure omaps
  ARM: OMAP2+: Fix the machine entry for am3517
  ARM: dts: Fix missing entries for am3517
  ARM: OMAP2+: Fix overwriting hwmod data with data from device tree
  +Linux 3.13-rc3

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/gpio/8xxx_gpio.txt

@@ -5,56 +5,70 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
 	gpio1: gpio-controller@c00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};

Documentation/devicetree/bindings/mmc/ti-omap.txt

@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.

Documentation/gpio/00-INDEX

@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface

MAINTAINERS

@@ -1934,7 +1934,8 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@fusionio.com>
+M:	Chris Mason <clm@fb.com>
+M:	Josef Bacik <jbacik@fb.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -4049,6 +4050,12 @@ W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
@@ -5261,7 +5268,7 @@ S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
 F:	include/linux/lockdep.h
-F:	kernel/lockdep*
+F:	kernel/locking/
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5973,10 +5980,10 @@ F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <Trond.Myklebust@netapp.com>
+M:	Trond Myklebust <trond.myklebust@primarydata.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
-T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
 S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
@@ -6243,8 +6250,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
+M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/
@@ -7385,7 +7392,6 @@ S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
-F:	kernel/wait.c
 F:	include/linux/wait.h
 
 SCORE ARCHITECTURE

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arm/boot/dts/Makefile

@@ -173,12 +173,17 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
 	nspire-tp.dtb \
 	nspire-clp.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap2430-sdp.dtb \
+	omap2420-n800.dtb \
+	omap2420-n810.dtb \
+	omap2420-n810-wimax.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
+	omap3-ldp.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \