staging: comedi: amplc_dio200_pci: use pci_ioremap_bar()

Use `pci_ioremap_bar()` to ioremap the PCI memory resources.  That
function just takes the PCI device and a bar index.  It also has some
additional sanity checks to make sure the bar is actually a memory
resource.

Eliminate some local variables from `dio200_pcie_board_setup()` and
`dio200_pci_auto_attach()` that were used to hold the results of
`pci_resource_len()` and `pci_resource_start()` that were only used
once.  Also eliminate the check that the bar is a memory resource in
`dio200_pcie_board_setup()` as `pci_ioremap_bar()` will do that for us.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/amplc_dio200_pci.c

@@ -339,7 +339,6 @@ static int dio200_pcie_board_setup(struct comedi_device *dev)
 {
 	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
 	void __iomem *brbase;
-	resource_size_t brlen;
 
 	/*
 	 * The board uses Altera Cyclone IV with PCI-Express hard IP.
@@ -351,13 +350,11 @@ static int dio200_pcie_board_setup(struct comedi_device *dev)
 	 * Enable" register at offset 0x50 to allow generation of PCIe
 	 * interrupts when RXmlrq_i is asserted in the SOPC Builder system.
 	 */
-	brlen = pci_resource_len(pcidev, 0);
-	if (brlen < 0x4000 ||
-			!(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM)) {
+	if (pci_resource_len(pcidev, 0) < 0x4000) {
 		dev_err(dev->class_dev, "error! bad PCI region!\n");
 		return -EINVAL;
 	}
-	brbase = ioremap_nocache(pci_resource_start(pcidev, 0), brlen);
+	brbase = pci_ioremap_bar(pcidev, 0);
 	if (!brbase) {
 		dev_err(dev->class_dev, "error! failed to map registers!\n");
 		return -ENOMEM;
@@ -375,7 +372,6 @@ static int dio200_pci_auto_attach(struct comedi_device *dev,
 	struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
 	const struct dio200_board *thisboard = NULL;
 	struct dio200_private *devpriv;
-	resource_size_t base, len;
 	unsigned int bar;
 	int ret;
 
@@ -399,22 +395,20 @@ static int dio200_pci_auto_attach(struct comedi_device *dev,
 		return ret;
 
 	bar = thisboard->mainbar;
-	base = pci_resource_start(pci_dev, bar);
-	len = pci_resource_len(pci_dev, bar);
-	if (len < thisboard->mainsize) {
+	if (pci_resource_len(pci_dev, bar) < thisboard->mainsize) {
 		dev_err(dev->class_dev, "error! PCI region size too small!\n");
 		return -EINVAL;
 	}
 	if (pci_resource_flags(pci_dev, bar) & IORESOURCE_MEM) {
-		devpriv->io.u.membase = ioremap_nocache(base, len);
+		devpriv->io.u.membase = pci_ioremap_bar(pci_dev, bar);
 		if (!devpriv->io.u.membase) {
 			dev_err(dev->class_dev,
 				"error! cannot remap registers\n");
 			return -ENOMEM;
 		}
 		devpriv->io.regtype = mmio_regtype;
 	} else {
-		devpriv->io.u.iobase = (unsigned long)base;
+		devpriv->io.u.iobase = pci_resource_start(pci_dev, bar);
 		devpriv->io.regtype = io_regtype;
 	}
 	switch (context_model) {