---

yaml
---
r: 280916
b: refs/heads/master
c: d9b78f3
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: eea9fc7ddda80d3221fd79430b841a2cb315bb9f
+refs/heads/master: d9b78f33d9c1b699b66f10ad2329487f813c4642

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -119,31 +119,6 @@ Description:
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
 
-What:		/sys/bus/usb/drivers/.../new_id
-Date:		October 2011
-Contact:	linux-usb@vger.kernel.org
-Description:
-		Writing a device ID to this file will attempt to
-		dynamically add a new device ID to a USB device driver.
-		This may allow the driver to support more hardware than
-		was included in the driver's static device ID support
-		table at compile time. The format for the device ID is:
-		idVendor idProduct bInterfaceClass.
-		The vendor ID and device ID fields are required, the
-		interface class is optional.
-		Upon successfully adding an ID, the driver will probe
-		for the device and attempt to bind to it.  For example:
-		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
-
-What:		/sys/bus/usb-serial/drivers/.../new_id
-Date:		October 2011
-Contact:	linux-usb@vger.kernel.org
-Description:
-		For serial USB drivers, this attribute appears under the
-		extra bus folder "usb-serial" in sysfs; apart from that
-		difference, all descriptions from the entry
-		"/sys/bus/usb/drivers/.../new_id" apply.
-
 What:		/sys/bus/usb/drivers/.../remove_id
 Date:		November 2009
 Contact:	CHENG Renquan <rqcheng@smu.edu.sg>

trunk/Documentation/kernel-parameters.txt

@@ -2632,10 +2632,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			[USB] Start with the old device initialization
 			scheme (default 0 = off).
 
-	usbcore.usbfs_memory_mb=
-			[USB] Memory limit (in MB) for buffers allocated by
-			usbfs (default = 16, 0 = max = 2047).
-
 	usbcore.use_both_schemes=
 			[USB] Try the other device initialization scheme
 			if the first one fails (default 1 = enabled).

trunk/arch/arm/mach-omap2/board-n8x0.c

@@ -46,7 +46,7 @@ static struct device *mmc_device;
 #define TUSB6010_GPIO_ENABLE	0
 #define TUSB6010_DMACHAN	0x3f
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#ifdef CONFIG_USB_MUSB_TUSB6010
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then

trunk/drivers/hv/hv_kvp.c

@@ -212,13 +212,11 @@ kvp_respond_to_host(char *key, char *value, int error)
 	 * The windows host expects the key/value pair to be encoded
 	 * in utf16.
 	 */
-	keylen = utf8s_to_utf16s(key_name, strlen(key_name), UTF16_HOST_ENDIAN,
-				(wchar_t *) kvp_data->data.key,
-				HV_KVP_EXCHANGE_MAX_KEY_SIZE / 2);
+	keylen = utf8s_to_utf16s(key_name, strlen(key_name),
+				(wchar_t *)kvp_data->data.key);
 	kvp_data->data.key_size = 2*(keylen + 1); /* utf16 encoding */
-	valuelen = utf8s_to_utf16s(value, strlen(value), UTF16_HOST_ENDIAN,
-				(wchar_t *) kvp_data->data.value,
-				HV_KVP_EXCHANGE_MAX_VALUE_SIZE / 2);
+	valuelen = utf8s_to_utf16s(value, strlen(value),
+				(wchar_t *)kvp_data->data.value);
 	kvp_data->data.value_size = 2*(valuelen + 1); /* utf16 encoding */
 
 	kvp_data->data.value_type = REG_SZ; /* all our values are strings */

trunk/drivers/usb/Makefile

@@ -6,8 +6,6 @@
 
 obj-$(CONFIG_USB)		+= core/
 
-obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
-
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 
 obj-$(CONFIG_USB_MON)		+= mon/
@@ -53,6 +51,7 @@ obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
 
 obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
 obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
+obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
 obj-$(CONFIG_USB_GADGET)	+= gadget/
 
 obj-$(CONFIG_USB_COMMON)	+= usb-common.o

trunk/drivers/usb/c67x00/c67x00-drv.c

@@ -225,10 +225,21 @@ static struct platform_driver c67x00_driver = {
 		.name = "c67x00",
 	},
 };
+MODULE_ALIAS("platform:c67x00");
+
+static int __init c67x00_init(void)
+{
+	return platform_driver_register(&c67x00_driver);
+}
 
-module_platform_driver(c67x00_driver);
+static void __exit c67x00_exit(void)
+{
+	platform_driver_unregister(&c67x00_driver);
+}
+
+module_init(c67x00_init);
+module_exit(c67x00_exit);
 
 MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
 MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:c67x00");

trunk/drivers/usb/c67x00/c67x00-hcd.c

@@ -271,6 +271,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
 	if (int_status & SOFEOP_FLG(sie->sie_num)) {
 		c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
 		c67x00_sched_kick(c67x00);
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 	}
 }